Developer docs
API playgroundTry for free, no card

Search company profiles

Freemelt

Full company profile

uuid0003nef

Namestring
Freemelt
Legal namestring
Freemelt Holding AB (publ)
Websiteurl
freemelt.com
Company typeenum
Public
Founded yearint
2017
Descriptiontext

Freemelt Holding AB (publ) is a Sweden-based, Nasdaq First North Growth Market-listed industrial 3D printer manufacturer (FREEMELT) founded in 2017 by seven engineers from Arcam, with operational headquarters in Mölndal/Gothenburg and wholly-owned subsidiaries in Germany and the United States. The company develops Electron Beam Powder Bed Fusion (E-PBF) systems that selectively melt metal powder in a vacuum at temperatures up to 1200 °C with beam power up to 6 kW, using a proprietary grid-less diode electron gun that maintains a stable ~200 µm beam spot across the full power range.

The product portfolio spans the full lifecycle of metal additive manufacturing: the open-architecture Freemelt ONE for materials research and development, the e-MELT-iD for process and application development, and the industrial e-MELT-iM designed for serial production with dockable build modules, active water cooling, and a recoater isolated in a separate vacuum enclosure. Freemelt's stack is complemented by two registered proprietary assets — Pixelmelt®, a cloud-based spot-melting software that divides the build area into pixels and applies configurable melting algorithms, and ProHeat®, a patented preheating method that uses a graphite plate and electron-beam heating to preheat fine and smoke-sensitive powders without expensive inert gases. An ultra-high-vacuum environment (down to 10⁻⁵ mbar) enables in-situ purification of refractory metals such as tungsten to single-digit ppm oxygen levels, and a push-feed powder delivery system supports non-spherical and lower-cost powders.

Freemelt generates revenue through three streams: capital-equipment sales of its E-PBF systems, Pixelmelt® software (subscription or licensing bundled with hardware), and service/maintenance plus collaborative development services covering feasibility studies, process development, and application engineering. The go-to-market is direct enterprise sales into defense, energy (including nuclear fusion), and MedTech/orthopedic-implant customers in Europe and the United States, supplemented by open-source engagement with academic and research institutions. Reported 2025 revenue growth was 172% off a small base, the installed base is approximately 40 systems globally, and Freemelt holds the #2 position in the E-PBF segment with a stated goal of reaching SEK 1 billion in revenue by 2030.

Short descriptiontext

Freemelt is a Swedish, Nasdaq First North-listed manufacturer of Electron Beam Powder Bed Fusion (E-PBF) metal 3D printers, serving defense, energy (including fusion), and MedTech customers across Europe and the US with research, development, and industrial serial-production systems.

Operating statusenum
Operating
Ownership categoryenum
Headcount rangeband
11–50
akta.pro rankint
HeadquartersMölndal, Sweden
HQ citystring
Mölndal
HQ countrystring
Sweden
HQ regionstring
Europe
Markets served

Serves global market

Offices5 records

Each record includes

City, Country, Type, Description, Source

Keyword5 values
metal additive manufacturing, electron beam powder bed fusion, industrial 3D printers, E-PBF systems, metal powder bed fusion
Industry3 codes
PRIMARYIMAHADAG
Additive Manufacturing for Metals (Metal 3D Printers & Post-Processing)
SECONDARYIMAAAAAB
Metal 3D Printers (LPBF/SLM/DMLS, Binder Jetting, DED/LENS/WAAM)
Industrials, Manufacturing & Construction/3D Printing/3D Printing Hardware (Printers & Systems)
SECONDARYIMAAAIAM
Service, Repair & Maintenance Contracts (Preventive Maintenance, Onsite Service, Extended Warranty)
Industrials, Manufacturing & Construction/3D Printing/Spare Parts, Maintenance & Consumables for 3D Printing
NAICS code1 code
  • Irradiation Apparatus Manufacturing334517
SIC code1 code
  • Special Industry Machinery (No Metalworking Machinery)3550
Product category
Industrial Metal Additive Manufacturing (E-PBF 3D Printing Systems)
Social media profiles3 records
GTM motion2 records

Each record includes

Type, Description, Source

Revenue model3 records
13D Printers and Hardware Sales
TypeHardware Sales
Description

Freemelt generates revenue from the sale of its E-PBF 3D printing systems, including the research-oriented Freemelt ONE and the industrial-grade e-MELT-iD and e-MELT-iM machines. These are sold as capital equipment to enterprises and institutions.

freemelt.com
2Software (Pixelmelt®)
TypeSubscription Recurring
Description

Cloud-based Pixelmelt® software is offered as part of the platform and supports build file creation for Freemelt's E-PBF systems. Revenue may be generated through software licensing or subscription as part of the product ecosystem.

freemelt.com
3Service, Maintenance & Development Services
TypeProfessional Services
Description

Freemelt provides service contracts, maintenance, and development services to support customers throughout the product lifecycle — from feasibility studies through to full-scale production. This includes process development support, application development, and open-source collaboration.

freemelt.com
Marketing channels6 records

Each record includes

Title, Type, Stage, Description, Source

Distribution channels3 records

Each record includes

Title, Type, Scope, Target buyer, Description, Source

Cost components6 values
Technology or R&D, Personnel, Supply Chain, Operations, Marketing or Sales, Infrastructure
Pricing details3 tiers
1Freemelt ONE — Research and development platform
ModelOne time/ perpetual licenseBilling cadenceMulti-year contract
Notes

The Freemelt ONE is designed for materials R&D and is offered as a capital purchase. No public pricing disclosed.

freemelt.com
2e-MELT-iD — Development platform for process optimization
ModelOne time/ perpetual licenseBilling cadenceMulti-year contract
Notes

The e-MELT-iD targets development and application development needs. Pricing is quote-based / not publicly disclosed.

freemelt.com
3e-MELT-iM — Industrial serial production platform
ModelOne time/ perpetual licenseBilling cadenceMulti-year contract
Notes

The e-MELT-iM is positioned for serial production with modular, high-productivity design. Pricing is quote-based / not publicly disclosed.

freemelt.com
GTM typeB2B
B2B
Offering typeHardware or Manufacturing
Hardware or Manufacturing
Brand1 of 5 records shown
1Freemelt ONE
Description

Research-focused E-PBF 3D printer tailored for materials research and development

freemelt.com
+4 more records
Core offering1 text field

Freemelt designs, manufactures, and sells industrial Electron Beam Powder Bed Fusion (E-PBF) metal 3D printing systems, including the Freemelt ONE research platform, the e-MELT-iD development machine, and the e-MELT-iM serial production system. The hardware portfolio is paired with the Pixelmelt cloud-based build file software, ProHeat preheating technology, and accompanying service, maintenance, and development services for defense, energy, and medical technology customers.

Differentiator
Functional benefit
Problem solved
Quantifiable outcome1 of 5 values shown
  • 172% revenue growth in 2025
+4 more records
Product overview1 text field

Freemelt develops a portfolio of E-PBF (Electron Beam Powder Bed Fusion) metal 3D printers led by the research-focused Freemelt® ONE, the development-oriented e‑MELT®-iD, and the industrial-scale e‑MELT®-iM for serial production. The portfolio is complemented by Pixelmelt® cloud-based build file software and ProHeat® patented preheating technology. Freemelt serves defense, energy, and MedTech industrial verticals, with an open-source philosophy that provides users full access to process parameters and build file creation tools. The company positions itself as a productivity partner throughout the entire development journey from feasibility studies to full-scale production.

Product and service6 records
1Freemelt® ONE
CategoryIndustrial 3D Printing Systems
Description

Research-focused E-PBF (Electron Beam Powder Bed Fusion) 3D printer tailored for materials research and development, featuring open-source architecture and configurable spot melting capabilities for processing novel alloys, refractory metals, and oxygen-sensitive materials.

2e-MELT®-iD
CategoryIndustrial 3D Printing Systems
Description

Development-focused E-PBF 3D printer designed to accelerate application development and process optimization for metal additive manufacturing, bridging research and serial production.

3e-MELT®-iM
CategoryIndustrial 3D Printing Systems
Description

Industrial-scale E-PBF 3D printer designed for serial production, featuring modular dockable build modules, active water cooling for under-one-hour post-build cooling, and 6 kW beam power for maximized throughput.

4Pixelmelt®
CategoryIndustrial 3D Printing Software
Description

Cloud-based software service for generating beam scanning patterns and build files for Freemelt's E-PBF systems, enabling pixel-level spot melting with configurable algorithms for precise heat management, microstructure tailoring, and automation of build file creation.

5Service & Maintenance
CategoryIndustrial 3D Printing Services
Description

Ongoing service contracts, maintenance, and technical assistance for installed Freemelt E-PBF 3D printing systems.

6Development Services
CategoryIndustrial 3D Printing Services
Description

Collaborative engineering and application development services supporting customers from early material and process development through application development to serial production, including feasibility studies, process optimization, and application development.

Scale indicator7 records

Each record includes

Type, Value, Description, Source

Partnership5 partners
Strategic tierCoreTypeStrategic or Co-development PartnerAnnounced on2026-04-07
Description

Loughborough University in the UK procured a Freemelt ONE electron beam melting platform to overcome fundamental limitations of laser-based AM when processing reflective and oxygen-sensitive metals such as copper, tungsten, and niobium. The open-architecture system was commissioned with support from Freemelt engineers for research in nuclear fusion, aerospace, and space technology.

Strategic tierCoreTypeStrategic or Co-development PartnerAnnounced on2026-02-13
Description

Freemelt AB and Novatron Fusion Group signed an MoU to collaborate on manufacturing methods for fusion reactors, with Freemelt aiming to expand its fusion activities in the Nordic market. The collaboration operates within the European fusion ecosystem, including other entities such as F4E and UKAEA.

Strategic tierCoreTypeStrategic or Co-development PartnerAnnounced on2025-07-24
Description

UKAEA commissioned an E-PBF (electron beam) machine from Freemelt AB alongside a Nikon SLM laser-based system to produce components for fusion energy systems. The initiative aims to demonstrate scalable production methods essential for future fusion power plants, reducing reliance on traditional manufacturing techniques.

Strategic tierMinorTypeOthers
Description

Eminova Fondkomission AB serves as the Certified Adviser for Freemelt Holding AB (publ), which is listed on Nasdaq First North Growth Market.

Strategic tierMinorTypeStrategic or Co-development Partner
Description

Freemelt uses outsourced manufacturing through Scanfil, an electronics and mechanics manufacturing services provider, to ensure scalable production, regional flexibility, and operational excellence for its industrial E-PBF systems.

Recent move6 records

Each record includes

Date, Type, Title, Description, Source

Expansion highlight6 records

Each record includes

Type, Description

Peers10 records
TypeBroad incumbent
Description

German industrial laser powerhouse with a TruPrint metal AM systems line. Competes on high-end industrial accounts in Europe and globally, with deep pockets from the parent industrial business.

TypeDirect peer
Description

The dominant E-PBF hardware vendor, originating from Arcam (the company that founded the E-PBF category and where Freemelt's seven founders previously worked). Direct head-to-head competitor with the same core electron-beam powder bed fusion technology.

TypeBroad incumbent
Description

Leading laser-based metal AM (L-PBF) provider, now part of Nikon. Direct competitor on real RFQs — UKAEA ordered both a Freemelt E-PBF and a Nikon SLM machine for fusion energy work, indicating they compete for the same mission-critical industrial budgets.

TypeDirect peer
Description

US-based metal AM company focused on serial production of complex parts in aerospace, defense, and energy using L-PBF. Comparable business model (capital equipment for industrial serial production) targeting many of the same high-end industrial customers as Freemelt's e-MELT-iM.

TypeBroad incumbent
Description

European leader in metal additive manufacturing across L-PBF and DED, with broad industrial penetration. Comparable in target verticals (aerospace, medical, automotive) and enterprise sales motion, though laser-based rather than E-PBF.

TypeBroad incumbent
Description

UK-based metal AM (L-PBF) systems and post-processing equipment, serving aerospace and medical device customers. Overlaps with Freemelt on European industrial accounts and MedTech/demand for high-purity metal processing.

TypeBroad incumbent
Description

Long-established 3D printing company offering metal AM systems, materials, and parts services. Broad portfolio overlapping with Freemelt on regulated medical and industrial customers, but operates more as a 3D-printing generalist.

TypeBroad incumbent
Description

Global 3D printing incumbent with polymer heritage and a growing metal AM footprint. Customer base and enterprise GTM motion similar to Freemelt, though differentiated more by polymers and broader 3D printing.

TypeEmerging player
Description

Dutch metal AM company building modular MetalFAB systems targeting serial production in aerospace and high-end industrial verticals. Closely positioned to Freemelt's e-MELT-iM ambitions around modular, scalable industrial metal AM.

TypeEmerging player
Description

Italian manufacturer of laser-based metal AM systems (mysint) targeting industrial and luxury/jewelry applications. Comparable European mid-cap metal AM vendor competing in adjacent industrial segments.

Market position
Strengths5 records

Each record includes

Headline, Details, Source

Weaknesses5 records

Each record includes

Headline, Details, Source

Competitive moat4 records

Each record includes

Type, Details

Key risks7 records

Each record includes

Headline, Details, Source

Key highlights7 records

Each record includes

Headline, Details, Source

Customer concentration

Classification, Details

Named customers5 records

Each record includes

Name, Industry, Type, Use case, Source, UUID

Segment4 records

Each record includes

Title, Type, Primary, Description, Pain point addressed, Use case, Source

Ideal customer profile4 records

Each record includes

Profile, Firmographic size, Sales motion, Sales cycle length, Buying structure, Purchase trigger, Buyer persona, Geography, Industry vertical, Primary use case, Description, Pain points, Evidence proof points, Target buyer

Technology focused
Yes
API detail
Has APIbool
No

Docs URL, Description

AI maturity
App detail

Has app

Feature8 records

Each record includes

Title, Differentiator, Description, Source

Core technology
Revenue estimate
Valuation estimate
Number of profiles
Profiles11 records

Each record includes

Name, Designation, Designation category, Overview, Profile commentary, Source

Subsidiaries3 records

Each record includes

Name, Acquired on, Relationship type, Type, Business focus

No data
Funding overview

Funding stage, Last funding date, Total funding USD

Funding rounds1 record

Each record includes

Round, Amount USD, Date, Pre money valuation, Total investors, Investors, News

Investors1 record

Each record includes

Name, Type, Date of entry, Rounds participated, Website

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Each record includes

Name, Acquisition type, Announced date, Completed date, Status, Website, News

Investment

Each record includes

Name, Round, Announced date, Lead investor, Website, News

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Freemelt

Industrial Metal Additive Manufacturing (E-PBF 3D Printing Systems)freemelt.com

Freemelt is a Swedish, Nasdaq First North-listed manufacturer of Electron Beam Powder Bed Fusion (E-PBF) metal 3D printers, serving defense, energy (including fusion), and MedTech customers across Europe and the US with research, development, and industrial serial-production systems.

What Freemelt does

Freemelt Holding AB (publ) is a Sweden-based, Nasdaq First North Growth Market-listed industrial 3D printer manufacturer (FREEMELT) founded in 2017 by seven engineers from Arcam, with operational headquarters in Mölndal/Gothenburg and wholly-owned subsidiaries in Germany and the United States. The company develops Electron Beam Powder Bed Fusion (E-PBF) systems that selectively melt metal powder in a vacuum at temperatures up to 1200 °C with beam power up to 6 kW, using a proprietary grid-less diode electron gun that maintains a stable ~200 µm beam spot across the full power range.

The product portfolio spans the full lifecycle of metal additive manufacturing: the open-architecture Freemelt ONE for materials research and development, the e-MELT-iD for process and application development, and the industrial e-MELT-iM designed for serial production with dockable build modules, active water cooling, and a recoater isolated in a separate vacuum enclosure. Freemelt's stack is complemented by two registered proprietary assets — Pixelmelt®, a cloud-based spot-melting software that divides the build area into pixels and applies configurable melting algorithms, and ProHeat®, a patented preheating method that uses a graphite plate and electron-beam heating to preheat fine and smoke-sensitive powders without expensive inert gases. An ultra-high-vacuum environment (down to 10⁻⁵ mbar) enables in-situ purification of refractory metals such as tungsten to single-digit ppm oxygen levels, and a push-feed powder delivery system supports non-spherical and lower-cost powders.

Freemelt generates revenue through three streams: capital-equipment sales of its E-PBF systems, Pixelmelt® software (subscription or licensing bundled with hardware), and service/maintenance plus collaborative development services covering feasibility studies, process development, and application engineering. The go-to-market is direct enterprise sales into defense, energy (including nuclear fusion), and MedTech/orthopedic-implant customers in Europe and the United States, supplemented by open-source engagement with academic and research institutions. Reported 2025 revenue growth was 172% off a small base, the installed base is approximately 40 systems globally, and Freemelt holds the #2 position in the E-PBF segment with a stated goal of reaching SEK 1 billion in revenue by 2030.

Freemelt firmographics

Firmographics
Name
Freemelt
Legal name
Freemelt Holding AB (publ)
Website
https://freemelt.com
Company type
Public
Founded year
2017
Operating status
Operating
Headcount range
11–50 employees
Short description
Freemelt is a Swedish, Nasdaq First North-listed manufacturer of Electron Beam Powder Bed Fusion (E-PBF) metal 3D printers, serving defense, energy (including fusion), and MedTech customers across Europe and the US with research, development, and industrial serial-production systems.
Ownership category
akta.pro rank

Freemelt industry classification

Industry
Product category
Industrial Metal Additive Manufacturing (E-PBF 3D Printing Systems)
NAICS
Irradiation Apparatus Manufacturing (334517)
SIC
Special Industry Machinery (No Metalworking Machinery) (3550)
akta.pro industry
PRIMARYIMAHADAG
Additive Manufacturing for Metals (Metal 3D Printers & Post-Processing)
SECONDARYIMAAAAAB
Metal 3D Printers (LPBF/SLM/DMLS, Binder Jetting, DED/LENS/WAAM)
Industrials, Manufacturing & Construction/3D Printing/3D Printing Hardware (Printers & Systems)
SECONDARYIMAAAIAM
Service, Repair & Maintenance Contracts (Preventive Maintenance, Onsite Service, Extended Warranty)
Industrials, Manufacturing & Construction/3D Printing/Spare Parts, Maintenance & Consumables for 3D Printing

Keywords

  • Metal additive manufacturing
  • Electron beam powder bed fusion
  • Industrial 3D printers
  • E-PBF systems
  • Metal powder bed fusion

Where Freemelt is headquartered

Location

Headquarters

HQ city
Mölndal
HQ country
Sweden
HQ region
Europe

Offices5 records

Markets served

Freemelt business model

Business model
GTM type
B2B
Offering type
Hardware or Manufacturing
Cost components
Technology or R&D, Personnel, Supply Chain, Operations, Marketing or Sales, Infrastructure

Revenue model

  1. 3D Printers and Hardware Sales: Freemelt generates revenue from the sale of its E-PBF 3D printing systems, including the research-oriented Freemelt ONE and the industrial-grade e-MELT-iD and e-MELT-iM machines. These are sold as capital equipment to enterprises and institutions.
  2. Software (Pixelmelt®): Cloud-based Pixelmelt® software is offered as part of the platform and supports build file creation for Freemelt's E-PBF systems. Revenue may be generated through software licensing or subscription as part of the product ecosystem.
  3. Service, Maintenance & Development Services: Freemelt provides service contracts, maintenance, and development services to support customers throughout the product lifecycle — from feasibility studies through to full-scale production. This includes process development support, application development, and open-source collaboration.

Pricing tiers

ModelBillingPrice
One time/ perpetual licenseMulti-year contractFreemelt ONE — Research and development platform
One time/ perpetual licenseMulti-year contracte-MELT-iD — Development platform for process optimization
One time/ perpetual licenseMulti-year contracte-MELT-iM — Industrial serial production platform

Go-to-market motion2 records

Distribution channels3 records

Marketing channels6 records

Freemelt product offering

Product offering

Core offering

Freemelt designs, manufactures, and sells industrial Electron Beam Powder Bed Fusion (E-PBF) metal 3D printing systems, including the Freemelt ONE research platform, the e-MELT-iD development machine, and the e-MELT-iM serial production system. The hardware portfolio is paired with the Pixelmelt cloud-based build file software, ProHeat preheating technology, and accompanying service, maintenance, and development services for defense, energy, and medical technology customers.

Product overview

Freemelt develops a portfolio of E-PBF (Electron Beam Powder Bed Fusion) metal 3D printers led by the research-focused Freemelt® ONE, the development-oriented e‑MELT®-iD, and the industrial-scale e‑MELT®-iM for serial production. The portfolio is complemented by Pixelmelt® cloud-based build file software and ProHeat® patented preheating technology. Freemelt serves defense, energy, and MedTech industrial verticals, with an open-source philosophy that provides users full access to process parameters and build file creation tools. The company positions itself as a productivity partner throughout the entire development journey from feasibility studies to full-scale production.

Differentiator

Problem solved

Functional benefit

Brands

  • Freemelt ONE: Research-focused E-PBF 3D printer tailored for materials research and development
  • eMELT iD
  • eMELT iM
  • Pixelmelt
  • ProHeat

Products and services

  • Freemelt® ONE Research-focused E-PBF (Electron Beam Powder Bed Fusion) 3D printer tailored for materials research and development, featuring open-source architecture and configurable spot melting capabilities for processing novel alloys, refractory metals, and oxygen-sensitive materials.
  • e-MELT®-iD Development-focused E-PBF 3D printer designed to accelerate application development and process optimization for metal additive manufacturing, bridging research and serial production.
  • e-MELT®-iM Industrial-scale E-PBF 3D printer designed for serial production, featuring modular dockable build modules, active water cooling for under-one-hour post-build cooling, and 6 kW beam power for maximized throughput.
  • Pixelmelt® Cloud-based software service for generating beam scanning patterns and build files for Freemelt's E-PBF systems, enabling pixel-level spot melting with configurable algorithms for precise heat management, microstructure tailoring, and automation of build file creation.
  • Service & Maintenance Ongoing service contracts, maintenance, and technical assistance for installed Freemelt E-PBF 3D printing systems.
  • Development Services Collaborative engineering and application development services supporting customers from early material and process development through application development to serial production, including feasibility studies, process optimization, and application development.

Quantifiable outcome

  • 172% revenue growth in 2025
  • +4 more outcomes

Companies that use Freemelt

Customer profile

Named customers5 records

Segments4 records

Ideal customer profiles4 records

Freemelt technology and API

Technology

Technology focussed Yes

API detail

Has API
No
API docs
API detail

Core technology

AI maturity

App detail

Feature8 records

Freemelt partnerships and signals

Strategic signal

Partnerships

Five partnerships are on record, tiered core and minor.

  • Loughborough UniversitycoreStrategic or Co-development Partner · 7 April 2026Loughborough University in the UK procured a Freemelt ONE electron beam melting platform to overcome fundamental limitations of laser-based AM when processing reflective and oxygen-sensitive metals such as copper, tungsten, and niobium. The open-architecture system was commissioned with support from Freemelt engineers for research in nuclear fusion, aerospace, and space technology.
  • Novatron Fusion Group (NFG)coreStrategic or Co-development Partner · 13 February 2026Freemelt AB and Novatron Fusion Group signed an MoU to collaborate on manufacturing methods for fusion reactors, with Freemelt aiming to expand its fusion activities in the Nordic market. The collaboration operates within the European fusion ecosystem, including other entities such as F4E and UKAEA.
  • UK Atomic Energy Authority (UKAEA)coreStrategic or Co-development Partner · 24 July 2025UKAEA commissioned an E-PBF (electron beam) machine from Freemelt AB alongside a Nikon SLM laser-based system to produce components for fusion energy systems. The initiative aims to demonstrate scalable production methods essential for future fusion power plants, reducing reliance on traditional manufacturing techniques.
  • Eminova Fondkomission ABminorOthersEminova Fondkomission AB serves as the Certified Adviser for Freemelt Holding AB (publ), which is listed on Nasdaq First North Growth Market.
  • ScanfilminorStrategic or Co-development PartnerFreemelt uses outsourced manufacturing through Scanfil, an electronics and mechanics manufacturing services provider, to ensure scalable production, regional flexibility, and operational excellence for its industrial E-PBF systems.

Scale indicators7 records

Recent moves6 records

Expansion highlights6 records

Freemelt competitors and assessment

Company assessment

Broad incumbents

  • TRUMPF: German industrial laser powerhouse with a TruPrint metal AM systems line. Competes on high-end industrial accounts in Europe and globally, with deep pockets from the parent industrial business.
  • Nikon SLM Solutions: Leading laser-based metal AM (L-PBF) provider, now part of Nikon. Direct competitor on real RFQs — UKAEA ordered both a Freemelt E-PBF and a Nikon SLM machine for fusion energy work, indicating they compete for the same mission-critical industrial budgets.
  • EOS GmbH: European leader in metal additive manufacturing across L-PBF and DED, with broad industrial penetration. Comparable in target verticals (aerospace, medical, automotive) and enterprise sales motion, though laser-based rather than E-PBF.
  • Renishaw: UK-based metal AM (L-PBF) systems and post-processing equipment, serving aerospace and medical device customers. Overlaps with Freemelt on European industrial accounts and MedTech/demand for high-purity metal processing.
  • 3D Systems: Long-established 3D printing company offering metal AM systems, materials, and parts services. Broad portfolio overlapping with Freemelt on regulated medical and industrial customers, but operates more as a 3D-printing generalist.
  • Stratasys: Global 3D printing incumbent with polymer heritage and a growing metal AM footprint. Customer base and enterprise GTM motion similar to Freemelt, though differentiated more by polymers and broader 3D printing.

Direct peers

  • Colibrium Additive (formerly GE Additive / Arcam): The dominant E-PBF hardware vendor, originating from Arcam (the company that founded the E-PBF category and where Freemelt's seven founders previously worked). Direct head-to-head competitor with the same core electron-beam powder bed fusion technology.
  • Velo3D: US-based metal AM company focused on serial production of complex parts in aerospace, defense, and energy using L-PBF. Comparable business model (capital equipment for industrial serial production) targeting many of the same high-end industrial customers as Freemelt's e-MELT-iM.

Emerging players

  • Additive Industries: Dutch metal AM company building modular MetalFAB systems targeting serial production in aerospace and high-end industrial verticals. Closely positioned to Freemelt's e-MELT-iM ambitions around modular, scalable industrial metal AM.
  • Sisma: Italian manufacturer of laser-based metal AM systems (mysint) targeting industrial and luxury/jewelry applications. Comparable European mid-cap metal AM vendor competing in adjacent industrial segments.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat4 records

Key risks7 records

Key highlights7 records

Customer concentration

Freemelt social profiles

Digital presence

Freemelt financial estimates

Financial estimate

Revenue estimate

Valuation estimate

Freemelt leadership team

Management profile

Number of profiles

Profiles11 records

Freemelt subsidiaries and ownership

Company hierarchy

Subsidiaries3 records

Freemelt funding detail

Funding detail

Funding overview

Funding rounds1 record

Investors1 record

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

Freemelt M&A and investment

M&A and investment

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Freemelt

What does Freemelt do?

Freemelt designs, manufactures, and sells industrial Electron Beam Powder Bed Fusion (E-PBF) metal 3D printing systems, including the Freemelt ONE research platform, the e-MELT-iD development machine, and the e-MELT-iM serial production system. The hardware portfolio is paired with the Pixelmelt cloud-based build file software, ProHeat preheating technology, and accompanying service, maintenance, and development services for defense, energy, and medical technology customers.

Is Freemelt a public or private company?

Freemelt is a public company. It is classified as public and is currently operating.

When was Freemelt founded?

Freemelt was founded in 2017. It employs 11 to 50 people.

Where is Freemelt based?

Freemelt is headquartered in Mölndal, Sweden, in the Europe region.

How does Freemelt make money?

Three revenue lines are on record. 3D Printers and Hardware Sales are the primary driver. The others are software (Pixelmelt®) and service, Maintenance & Development Services.

Who are Freemelt's main competitors?

Broad incumbents on record are TRUMPF, Nikon SLM Solutions, EOS GmbH, Renishaw, 3D Systems and Stratasys. Direct peers are Colibrium Additive (formerly GE Additive / Arcam) and Velo3D. Emerging players are Additive Industries and Sisma.

Does Freemelt have an API?

No public API is recorded for Freemelt.

What industry is Freemelt in?

Freemelt's product category is Industrial Metal Additive Manufacturing (E-PBF 3D Printing Systems). Its primary akta.pro industry code is IMAHADAG, Additive Manufacturing for Metals (Metal 3D Printers & Post-Processing), with a secondary code of IMAAAAAB, Metal 3D Printers (LPBF/SLM/DMLS, Binder Jetting, DED/LENS/WAAM). Its NAICS code is 334517 and its SIC code is 3550.

Unlock the full company data

50 free credits on sign-up, no credit card required.

Contact sales
Live signals
The future of tradingInvitation to Freemelt’s investor updateFreemelt invites investors to a digital update on 1 December at 09:00 CET, where CEO Daniel Gidlund and CFO Martin Granlund will present the company's Chapter 3 phase. The update covers recent orders validating its Manufacturing business and the opportunity to build a European platform for sovereign manufacturing.TradingViewFREEM: Record orders validate manufacturing growth; delivery scale-up and funding are nextFreemelt Holding AB reported Q3 2026 order intake of SEK 60.5 million, a 227% year-over-year increase, with the order book approaching SEK 100 million after post-quarter orders. The company plans a SEK 152 million rights issue to fund delivery and manufacturing scale-up, targeting positive EBITDA by 2028.TradingViewFreemelt Q3 2026 Earnings Call Is LiveFreemelt's Q3 2026 earnings call is live, with executives discussing financial results and answering analyst questions. The call may include surprise news, and management commentary on demand, margins, or capital spending could move markets.The future of tradingFreemelt Q3 operating loss widens to SEK 22.12 million; Q3 net sales fall 30% to SEK 11.96 millionFreemelt's Q3 2026 operating loss widened to SEK 22.12 million, while net sales fell 30% to SEK 11.96 million. Order intake more than tripled to SEK 60.52 million, and a fully guaranteed SEK 152 million rights issue will fund order-book delivery and capacity expansion.TradingViewFREEM: Record orders validate the manufacturing strategy as financing supports capacity expansionFreemelt Holding AB reported Q3 sales fell 30% year-over-year, while order intake surged 227% and the order book exceeded SEK 100m. New F4E and ESS manufacturing orders validate the expanded strategy, and a SEK 152m rights issue is intended to support growth.The future of tradingFreemelt Holding AB (publ) publishes the Interim report for Q3 2026Freemelt Holding AB published its Q3 2026 interim report, reporting net sales of SEK 11,958 million and an operating loss of SEK 22,118 million. Order intake rose 227% year-on-year to SEK 60.5 million, and the order book exceeded SEK 100 million. The company plans a live webcast on November 16.VoxelMattersFreemelt wins Alsymex order to make tungsten subassemblies for ITER qualificationFreemelt received a SEK 3.3 million order from Alsymex to manufacture tungsten subassemblies for ITER qualification. The work covers tungsten bricks joined to copper substrates for high heat flux testing, with final delivery in Q1 2027. The project supports ITER's tungsten qualification program.AffarsvarldenFreemelt: Upplysning – oklart hur mycket som är bindandeFreemelt Holding set terms for its preferred share issuance, which could bring in 151.8 Mkr gross. Costs are expected around 17 Mkr if guarantees choose cash, and subscriptions total 51 Mkr (33.6% of the issue). The company will disclose the split between binding commitments and intentions in an information document.AffarsvarldenFreemelt vill printa nya aktier för 152 miljonerFreemelt Holding will raise 151.8Mkr via a preferential share issuance, with the prospectus showing two positive and six negative flags. Q3 net sales fell to 12.0Mkr, but orders rose to 60.5Mkr. The company expects to reach positive cash flow by 2029.The future of tradingFreemelt secures ITER-related qualification project from AlsymexFreemelt received a SEK 3.3 million order from Alsymex, a French ITER supplier, for tungsten subassemblies. The order supports qualification of advanced tungsten components for ITER, with delivery in Q1 2027. The project follows a prior SEK 55 million order from F4E.