What Silpro does

SILPRO is a US-based specialty construction materials manufacturer founded in 1951 and headquartered in Ayer, Massachusetts, with manufacturing and warehousing operations in Kent, Washington and Cleveland, Ohio. The company designs, formulates, and sells polymer-modified cement-based products—including calcium aluminate cement formulations, Portland cement-based coatings, and hydraulic cement technologies—organized across 13 product categories spanning skim coats, thin and thick repair mortars, self-leveling cements, vertical/overhead mortars, decorative exterior finishes, waterproofing coatings, grouts, hydraulic plugs, polymeric sands, bonding agents/admixtures, and sealers.

The company's product portfolio is anchored by 20+ registered trademarks such as Skim Pro®, TDQ™, Patchco®, Raeco®, Silflo®, SilproGrout®, Fastcrete®, and Easy Plug™, with differentiated performance characteristics including rapid cure times (flooring installable in 30 minutes; vehicle traffic in 1–3 hours), high compressive strength (up to 5,150 PSI), and freeze-thaw resistance suited to demanding infrastructure applications including DOT bridge deck and highway overlay repair.

SILPRO operates a hybrid distribution model, selling through a network of distributor partners alongside direct engagement with flooring, masonry, and concrete repair contractors, with technical support and personalized service positioned as core competitive advantages. Revenue is generated through transactional unit-pricing of bagged and pail-packaged products (10–50 lb formats), with no subscription or recurring contract model. The company serves professional contractors across three primary segments—flooring, concrete repair, and masonry—in the United States only.

Name

Silpro

Legal name

SILPRO

Website

https://silpro.com

Company type

Private

Founded year

1951

Operating status

Operating

Headcount range

11–50 employees

Short description

SILPRO is a US specialty construction materials manufacturer founded in 1951 that formulates and sells polymer-modified cement-based floor preparation, concrete repair, and masonry restoration products to flooring, concrete, and masonry contractors through distributors and direct sales.

Ownership category

akta.pro rank

Product category

Specialty Construction Materials

NAICS

Cement and Concrete Product Manufacturing (3273), Other Concrete Product Manufacturing (327390)

SIC

Concrete, Gypsum & Plaster Products (3270), Concrete Products, Except Block & Brick (3272)

akta.pro primary industry

Mortar, Grout & Masonry Cements (IMADABAL)

Keywords

• Floor preparation products
• Concrete restoration solutions
• Cementitious repair materials
• Masonry repair products
• Self-leveling underlayment

Headquarters

HQ city

Ayer

HQ country

United States

HQ region

North America

Offices4 records

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Supply Chain, Operations, Personnel, Marketing or Sales, Technology or R&D

Revenue model

1. Specialty Construction Materials Sales: SILPRO manufactures and sells specialty cementitious products for floor preparation and concrete repair. Products are sold through distributor partners and directly to flooring, masonry, and concrete repair contractors. Revenue is generated through product sales with pricing based on package size and formulation type.

Pricing tiers

Go-to-market motion1 record

Distribution channels2 records

Marketing channels2 records

Core offering

SILPRO manufactures and sells specialty cementitious construction materials used for floor preparation, concrete repair, masonry restoration, and waterproofing. The company produces a comprehensive portfolio of polymer-modified skim coats, thin and thick repair mortars, self-leveling underlayments, grouts, sealers, bonding agents, and hydraulic cements. Products are sold through distributor partners and directly to professional flooring, masonry, and concrete repair contractors.

Product overview

SILPRO offers a comprehensive portfolio of floor preparation and concrete/masonry repair products organized across 13 product categories. The portfolio includes Skim Pro®, Prime Patch®, and Raeco® Glide™ for skim coat applications; TDQ™, Patchco®, and Raeco® Feather Spread RPS™ for thin repair mortars; Fastcrete®, Mascrete®, SilproRapid™, Fastcrete DOT, and Fastcrete DOT FA for thick repair mortars; Raeco® SLU™ Superflow, Silflo® 220, Silflo® 230, and Silflo® SG for self-leveling cements; Easy Patch™, SilproRepair™ VOH, and VO Patch® for vertical and overhead applications; FSB®, Concrete Finish™, California Stucco™, SilproFinish™ Cote, Hawk & Trowel™ Pigments, and SKIMWALL™ for decorative exterior finishes; Seal Cote® for waterproofing; SilproGrout™ 424 and SilproGrout UWR® for grouts; Easy Plug products for hydraulic plugging; SilproPaver™ Sand for polymeric sands; multiple bonding agents including Weld-O-Bond™, R-2000™ PRIMER, C-21 Acrylic®, CIE 100 Epoxy™, Concrete Supplement™, and SMB Stucco Masonry Bond; and sealers including Silocks Plus®, Silocks Plus® WB, and Masonry Lusta Plus®. The company serves flooring, masonry, and concrete repair contractors with products that improve service life and reduce cost.

Differentiator

Problem solved

Functional benefit

Brands

• Skim Pro®: Fast-setting, high performance, polymer-modified one component product for leveling and smoothing concrete, ceramic and quarry tile, terrazzo, wood and water-insoluble cut-back adhesive prior to the installation of finished flooring.
• TDQ™ (Thin Deep Quick Repair)
• Patchco®
• Prime Patch®
• Raeco® Glide™
• Raeco® Feather Spread RPS™
• Raeco® SLU™ Superflow
• CIE 100 Epoxy™
• TDQ Extend®
• Easy Plug™
• SKIMWALL™
• SilproRepair™ VOH
• Silflo®
• SilproPaver™ Sand
• SilproGrout UWR®
• SilproGrout™ 424
• Silocks Plus® WB
• Silocks Plus®
• Masonry Lusta Plus®
• FSB® (Fiberglass Surface Bonding Cement)
• VO Patch®
• SilproFinish™ Cote
• Easy Plug 3-5 Minutes
• Easy Plug 60 Seconds
• R-2000™ PRIMER
• C-21 Acrylic®
• Concrete Supplement™
• Weld-O-Bond™
• Fastcrete®
• Mascrete®
• SilproRapid™
• Fastcrete DOT™
• Fastcrete DOT FA™
• Seal Cote®
• California Stucco™
• Concrete Finish™
• Hawk & Trowel™ Pigments
• SMB Stucco Masonry Bond
• Easy Patch™

Products and services

• Skim Pro® Fast-setting, high performance, polymer-modified one component product for leveling and smoothing concrete, ceramic and quarry tile, terrazzo, wood, and water-insoluble cut-back adhesive prior to the installation of finished flooring like VCT or vinyl. Mixes with water, no priming required, with 30-minute flooring installation and 3-5 hour foot traffic readiness.
• TDQ™ (Thin Deep Quick Repair) One component, high-quality, cement-based, multi-purpose repair material with feather edge to 4 inch capability, excellent freeze-thaw resistance, for interior or exterior applications. Available in 50# bags (50 per pallet), 50# pails (54 per pallet), and 15 lb. pails.
• Patchco® One component, fast-setting, polymer modified, Calcium Aluminate cement-based mortar for patching, ramping, and leveling with cure time as little as 60 minutes and same-day floor covering installation capability. Available in 40# bags (70 per pallet).
• Prime Patch® One component, fast-setting, polymer-modified, all-purpose calcium aluminate cement-based patching and skimming compound with 60 minute cure time and 15 minute set time. Available in 25# bags (120 per pallet).
• Prime Patch® 20 One component, fast-setting, polymer-modified, all-purpose calcium aluminate cement-based patching and skimming compound with 20 minute set time.
• Raeco® Glide™ Very fast setting, self-curing, ultra-smooth textured, high strength, single component calcium aluminate cementitious skimming compound with 5150 P.S.I. compressive strength for vertical and horizontal surfaces. Available in 15# pails.
• Raeco® Feather Spread RPS™ Fast-setting, smooth textured, high strength, single component concrete repair compound with Portland cements and graded silica aggregates for multipurpose repairs and floor covering underlayment.
• Raeco® SLU™ Superflow Extremely flowable, self-curing, polymer-modified, self-leveling cementitious underlayment for flat, smooth, durable floors with less drying time than typical Portland cement products. For 1/8 inch to 2 inch thickness applications.
• Silflo® 220 High performance, general-purpose, Calcium Aluminate cement-based, polymer-modified self-leveling underlayment for resurfacing and leveling interior surfaces.
• Silflo® 230 Fast-setting, high performance, multi-purpose, Calcium Aluminate cement-based, polymer-modified topping for self-leveling underlayment or exposed wearing surface, with floor coverings installable in as little as 12 hours.
• Silflo® SG High performance, synthetic gypsum, self-leveling underlayment specifically designed for resurfacing and leveling wood and gypsum substrates.
• Easy Plug™ 60 Seconds Cementitious hydraulic cement that sets rapidly in 60 seconds to patch cracks and holes, effective for stopping water flow permanently under hydrostatic pressure.
• Easy Plug™ 3-5 Minutes Cementitious hydraulic cement formulated to set rapidly in 3-5 minutes for patching cracks and holes, effective for stopping water flow permanently.
• Easy Patch™ Rapid-setting, low shrinkage, Portland cement-based repair mortar for patching and repairing concrete indoors or outdoors, above or below grade, without forms.
• SilproRepair™ VOH One-component, fiber reinforced, rapid-setting repair mortar for structural vertical and overhead applications with freeze/thaw resistance and integral corrosion inhibitor.
• VO Patch® One-component, Portland cement-based material for restoring and repairing vertical and overhead concrete and masonry surfaces with thickness from 1/8 inch to 2 inches.
• Mascrete® Polymer-modified, Portland cement-based mortar for patching, resurfacing, and leveling floors, or as underlayment with high resistance to abrasion and impact.
• Fastcrete® Fast-setting, Portland cement-based, polymer-modified, fiber-reinforced, one component structural repair and leveling mortar for interior and exterior restoration.
• Fastcrete DOT™ Fast-setting, full-depth repair hydraulic cement for commercial and industrial use in repairing bridge decks, highway overlays, parking garage structures, and concrete roads.
• Fastcrete DOT FA™ Fast-setting, low permeability hydraulic cement containing fly ash and silica fume for DOT use in repairing bridge decks, highway overlays, and parking garage structures; open to vehicle traffic in as little as 1-3 hours at 70°F.
• SilproRapid™ Fast-setting, cement-based, fiber reinforced, structural full-depth repair mortar for bridge decks, highway overlays, parking garage structures, and concrete roads.
• SilproGrout™ 424 High performance, high-strength, non-shrinking, non-metallic, cement-based grout for plant maintenance and general construction applications.
• SilproGrout UWR® Cement-based grout product for general construction and plant maintenance applications.
• Seal Cote® Portland cement-based coating used to waterproof, protect, and decorate new and old concrete and masonry surfaces, available in gray or white.
• Silocks Plus® WB Clear, water-based, deep penetrating, alkoxysilane breathable water-repellent for concrete, masonry, and cement-based surfaces with low VOC content. Available in 1 Gallon (144 per pallet) and 5 Gallon (36 per pallet).
• Silocks Plus® Clear, solvent-based, deep penetrating, combination siloxane/silane breathable water-repellent treatment for concrete and masonry surfaces with extended life formulation.
• Masonry Lusta Plus® Clear acrylic solvent-based liquid sealer for brick, slate, granite, limestone, bluestone, pavers, terrazzo, masonry, concrete, and exposed aggregate surfaces.
• Weld-O-Bond™ Bonding coat specifically formulated for bonding Portland cement mixes to interior or exterior concrete or masonry surfaces and gypsum mixes to interior surfaces.
• R-2000™ Primer Premium quality liquid latex bonding agent and mortar additive, low odor one time re-emulsifiable copolymer emulsion for preparing surfaces for cementitious repair and leveling mortars.
• C-21 Acrylic® 100% acrylic latex admix/internal bonding agent that enhances tensile and flexural strength, flexibility, and maximum adhesion of cementitious mortars and coatings.
• CIE 100 Epoxy™ Solvent-free, moisture insensitive, 100% solids, low modulus, two-component bonding agent and primer for self-leveling toppings and concrete applications.
• Concrete Supplement™ Integral admixture that reacts with Portland cement in concrete, mortar, stucco and grout to produce complete hydration with increased compressive strength (up to 30%) and faster set times.
• SMB Stucco Masonry Bond Acrylic latex admix/internal bonding agent for enhanced adhesion, abrasion resistance, tensile and flexural strength of stucco, mortar, concrete, and plaster.
• FSB® (Fiberglass Surface Bonding Cement) Polymer-modified, Portland cement-based trowel-applied high performance surface bonding cement containing sized aggregates, fiberglass reinforcing fibers, and integral waterproofing agent.
• Hawk & Trowel™ Pigments Concrete coloring pigments for decorative finishes available in multiple color options including Almond, Bone White, Canyon Beige, Ivory, Shell White, Surf Sand, and Indiana Limestone.
• SilproFinish™ Cote Portland cement-based, polymer-modified coating with specially graded aggregates for finishing concrete surfaces including tilt-up walls, poured concrete, precast concrete, and masonry.
• Concrete Finish™ Trowel-applied, Portland cement-based coating designed to protect and decorate concrete and masonry surfaces, providing attractive, durable, water-resistant finish.
• California Stucco™ Portland cement-based, water-resistant coating designed for New England weather conditions, combining texture variety with low maintenance in a permanent finish material.
• SKIMWALL™ Fast-setting, smooth-textured, high strength, single component concrete repair compound for exterior or interior concrete walls and floors with 3500 PSI compressive strength.
• SilproPaver™ Sand Proprietary mixture of polymers, sand, and components for filling and stabilizing joints up to 1 inch thick on driveways, patios, pool decks, and walkways.

Quantifiable outcome

• Fast curing - flooring installed in as little as 30 minutes, foot traffic in 3-5 hours
• +5 more outcomes

Segments3 records

Ideal customer profiles3 records

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature6 records

Scale indicators2 records

Recent moves5 records

Expansion highlights3 records

Market position

Competitive moat4 records

Key risks6 records

Key highlights7 records

Customer concentration

• LinkedInlinkedin.com/company/silpro-llc

Revenue estimate

Valuation estimate

Number of profiles

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Silpro