Jereh

What Jereh does

Jereh is a global manufacturer of high-end petroleum equipment offering an integrated portfolio spanning fracturing spreads, coiled tubing units, drilling and workover rigs, cementing fleets, nitrogen equipment, wellhead and flowline products, high-pressure plunger pumps, and 3D simulation training systems. The company serves national and international oil companies (NOCs/IOCs) and oilfield service providers across the Americas, Middle East, Russia/Central Asia, and China, with products certified to API Q1, 4F, 7K, 8C, 6A, and 16A as well as NACE MR0175, DNV, and BV standards. Its proprietary platforms include the IntelliFrac electric fracturing system (grid- or gas-to-electricity-powered, zero CO2, 40% lower maintenance than diesel), the Apollo turbine-driven frac pumper (Vericor TF50F turbine paired with the JR5000QPW quintuplex pump, burning 100% natural gas with sub-Tier IV emissions), and the AMS/IAMS bivariate automatic mixing system for cementing.

Jereh generates revenue primarily through one-time equipment sales of customized, quote-based packages to enterprise oil and gas operators, supplemented by aftermarket refurbishment, spare parts, and simulation training services. The company also participates as an equipment supplier or contractor in large-scale EPC projects, most notably a bid for the ADNOC Gas Habshan 7 gas processing facility valued at an estimated $3.5–4 billion, and has delivered oil separation and wastewater treatment systems for Petrobras' P84 and P85 FPSO units in Brazil. The entity analyzed here operates as American Jereh International Corporation (Houston, TX, serving USA, Canada, and South America) and is a wholly-owned subsidiary of the publicly listed parent, Jereh Energy Equipment and Technologies Corporation (Shenzhen Stock Exchange: SZ002353), headquartered in Yantai, China. Distribution is direct enterprise sales to NOCs and IOCs; pricing is non-public, customized, and configuration-dependent.

Strategic posture in 2026 reflects an explicit broadening beyond oilfield equipment: an MoU with the UAE Ministry of Investment for an integrated clean energy platform (small modular reactors, 100,000 tpa anode material, lithium battery recycling), and a joint venture with FTAI Aviation for mobile turbine packaging of 100 CFM56 aeroderivative units targeting the commercial aerospace market.

Name

Jereh

Legal name

American Jereh International Corporation

Website

https://americanjereh.com

Company type

Public

Founded year

1999

Operating status

Operating

Headcount range

101–250 employees

Short description

Jereh is a global petroleum equipment manufacturer producing fracturing, coiled tubing, drilling, cementing, nitrogen, and wellhead systems for NOCs and IOCs. Listed on the Shenzhen Stock Exchange (SZ002353), it sells custom equipment and participates in major EPC projects worldwide.

Ownership category

akta.pro rank

Product category

Oilfield Equipment Manufacturing

NAICS

Oil and Gas Field Machinery and Equipment Manufacturing (333132)

SIC

Oil & Gas Field Machinery & Equipment (3533)

akta.pro primary industry

Gas Processing & NGL Recovery (Dehydration, Sweetening, Cryogenic Recovery) (EUALAGAG)

Keywords

• Oilfield equipment manufacturing
• Hydraulic fracturing equipment
• Coiled tubing units
• Cementing fleet
• Wellhead equipment

Headquarters

HQ city

Houston

HQ country

United States

HQ region

North America

Offices4 records

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Supply Chain, Operations, Technology or R&D, Personnel, Marketing or Sales, Infrastructure

Revenue model

1. Oilfield Equipment Sales: Sale of fracturing units, coiled tubing equipment, cementing fleets, drilling rigs, nitrogen equipment, plunger pumps, and wellhead equipment to oil and gas companies worldwide.
2. EPC Project Participation: Participation in large-scale EPC (Engineering, Procurement, Construction) projects as equipment supplier or contractor for gas processing facilities.
3. Aftermarket Services: Refurbishment services, after-sale support, spare parts supply, and simulation training services.

Go-to-market motion1 record

Distribution channels1 record

Marketing channels1 record

Core offering

Jereh is a global petroleum equipment manufacturer that designs, manufactures, and supplies integrated oilfield equipment solutions including fracturing units, coiled tubing units, drilling rigs, cementing fleets, nitrogen equipment, wellhead equipment, plunger pumps, and flowline products. The company also operates simulation training systems and aftermarket/refurbishment services for oil and gas operators worldwide.

Product overview

Jereh is a global high-end petroleum equipment manufacturer providing customized products and integrated solutions. The company operates as a unified platform manufacturer with distinct product lines including: (1) Fracturing Equipment portfolio featuring IntelliFrac electric fracturing systems, Apollo turbine-driven frac pumps, and conventional fracturing units (2250-3300 HP) with supporting equipment like sand blenders, hydration units, and manifold systems; (2) Coiled Tubing Unit systems with truck/trailer/skid-mounted configurations and comprehensive accessories including injectors, BOPs, reels, and inspection/analysis systems; (3) Drilling Equipment including skid-mounted rigs (4000-9000m depth), trailer/truck-mounted rigs, workover rigs, and snubbing units; (4) Cementing Fleet with single/twin pump cementing units and super power 2250 HP systems; (5) Nitrogen Equipment including direct-fired and heat recovery pumpers plus nitrogen generators; (6) Wellhead Equipment featuring gate valves, frac valves, and Christmas tree products meeting API 6A and NACE MR0175; (7) Simulation Training Systems for cementing, nitrogen pumping, coiled tubing, and fracturing operations; (8) Plunger Pumps ranging 500-5000 HP for various applications; and (9) Flowline Products including swivel joints, plug valves, choke valves, and hose loops. American Jereh serves as the subsidiary for USA, Canada, and South America markets.

Differentiator

Problem solved

Functional benefit

Products and services

• IntelliFrac Electric Hydraulic Fracturing Equipment Electric-powered hydraulic fracturing unit with JR7000QPE Quintuplex Plunger Pump for oil and gas operators. Operates on grid power or with integrated Power2Go Gas Turbine Generator Set, eliminating CO2 emissions and reducing operational costs.
• Apollo Turbine-Driven Frac Pumper Turbine-driven fracturing pumper (5600 hp) for high-efficiency fracturing operations. Burns 100% natural gas with 42% lower NOx and 65% lower CO than Tier IV regulations, delivering higher horsepower output in a smaller footprint than conventional diesel-driven pumps.
• Fracturing Unit Fracturing units in 2250 HP, 2500 HP, 3000 HP, and 3300 HP configurations with truck/trailer/skid mounting options for oil and gas operators. Features intelligent pumping control system and wireless/satellite communication for real-time data monitoring.
• Sand Blender Sand blending equipment in 75 bbl, 100 bbl, 130 bbl, and 240 bbl capacities with closed-type systems featuring dual blending systems and Tank in Tank structure for optimal sand-fluid mixing with automatic density control.
• Hydration Unit Gel powder and water mixing equipment with large flowrate, high automation, one-button intelligent control mode, and self-developed mixer and mixing system for efficient hydration operations in fracturing applications.
• Coiled Tubing Unit Complete coiled tubing unit systems in truck-mounted, trailer-mounted, and skid-mounted configurations for oil and gas operators. Available with continuous pulling capacities from 40,000 lb to 140,000 lb for workover and well intervention operations.
• CTU Injector (Coiled Tubing Injector) Coiled tubing injectors from ZRT-10K to ZRT-200K models with intermittent pulling capacities up to 95,000 kg. Features double piston motor input with stepless speed regulation and international patented gripper block for quick removal and installation.
• Coiled Tubing BOP (Blowout Preventer) Well control equipment against overflow and blowout available in single ram, dual ram, quad ram, and combi ram configurations. Meets API 16A standards with rated pressures up to 20,000 psi for oil and gas operators.
• Tubing Inspection System (JTIS) Detection system for coiled tubing outer diameter, ovality, wall scratches, holes, and pits via MFL (Magnetic Flux Leakage) technology. Features multi-channel sensors with real-time inspection accuracy of 0.10% ovality and 0.005 inch wall thickness accuracy.
• Tubing Analysis System (JTAS) Coiled tubing simulation analysis system including CTlife (fatigue life prediction module) and CTproject (engineering simulation module). Analyzes force, fatigue life consumption, and pressure gradient during in-hole and out-hole operations.
• Continuous Acid Mixing Unit Totally enclosed acid mixing system with closed acid mixing tank reducing acid mist diffusion. GYC100 model delivers 2,650 gpm max discharge flowrate with multiple demist systems including spray-type and alkali reaction type for well stimulation operations.
• Skid Mounted Drilling Rig Drilling rigs covering depths from 4000m to 9000m with maximum static load from 2250kN to 6750kN. Conforms to API Q1, 4F, 7K and 8C specifications. Design ambient temperature extends from -45C to +45C for high temperature, arctic, desert, and humid conditions.
• Trailer/Truck Mounted Drilling Rig Self-propelled drilling rigs with mechanical and hydraulic drive covering drilling depth from 1000m to 4000m and maximum static load from 900kN to 2250kN. Features high operation load, reliable performance, excellent off-road performance, and convenient movement.
• Workover Rig Workover rigs covering workover depth from 2500m to 7000m with drawworks power from 250HP to 1000HP. Available in truck-mounted and trailer-mounted configurations with mechanical and hydraulic drive for well intervention operations.
• Snubbing Unit Pressure operations equipment running tube string, milling and drilling plugs under pressure for live well interventions. Models include 150K, 170K, 225K, and 340K with lifting capacities up to 340K lb and snubbing capacities up to 185K lb.
• Single Pump Cementing Unit All-weather cementing unit with bivariate automatic mixing system (AMS) for accurate density control. Features seamless switching between MANUAL and AUTO control modes and professional data acquisition system for oil and gas operators.
• Twin Pump Cementing Unit Cementing unit with twin pump configuration achieving mutual standby of manifolds and unit functions for enhanced operation safety and reliability. Features 12 inch HMI display and intelligent bivariate mixing system (AMS).
• 2250 HP Super Power Cementing Unit High-power cementing unit with IAMS 3.0 mixing system for automatic engine throttle and transmission gear control. Single unit meets 8,700 psi and 317 gpm operation requirements with maximum working pressure of 18,247 psi.
• Direct Fired Nitrogen Pumper Nitrogen pumping equipment with direct-fired vaporizer featuring one-key ignition, automatic burning, and automatic nitrogen flowrate and temperature control. Models include 400K, 800K, and 1000K with nitrogen purity above 99.99% for well stimulation and gas lifting.
• Heat Recovery Nitrogen Pumper Nitrogen pumping unit recovering heat from engine jacket water, hydraulic system, and lubrication system to vaporize LN2. Features high fuel efficiency, low operating cost, and models including 90K, 180K, and 360K with max working pressure up to 15,000 psi.
• Nitrogen Generator Unit Nitrogen generation equipment using hollow fiber membrane technology with JNGS full-automatic monitoring system. Models range from DF 600 to DF 3600 with N2 purity of 95% (90-99.9% adjustable) and discharge rates from 21,200 to 127,200 SCFH.
• Plunger Pumps High pressure plunger pumps ranging from 500hp to 5,000hp including JR7000QP, JR5000QPN, 5000QP, 4000P, 2800QP, 2800Q, 2500Q, 1000QS, 600SN, 600S, 600N, and 500W models for cementing, acidizing, and fracturing applications.
• Wellhead Equipment Wellhead and Christmas tree products designed in compliance with API 6A and NACE MR0175. Includes Christmas tree, frac tree, casing head, casing spool, tubing spool, and tubing head adapter with annual output of 2,500 sets for oil and gas operators.
• Gate Valve Full-bore gate valves with two-way symmetrical seal and pressure assisted seal. Working pressure 3,000-15,000 psi with tungsten carbide sealing surface for erosion and corrosion resistance. Temperature levels K-U (-75F to 250F).
• Frac Valve High-pressure frac valves for continuous high pressure and large displacement demand with unique ball screw structure. Working pressure 5,000-20,000 psi with low open/close torque (only 2/3 of same size valves) and optional hydraulic/pneumatic actuator for remote control.
• Swivel Joints Forged swivel joints from premium alloy steel with advanced metal melting and heat treatment. Rated working pressure 69-138 MPa (10,000-20,000 psi) and nominal sizes 1.5 to 4 inches for fracturing, cementing, acidizing, and testing lines.
• Plug Valves High-pressure plug valves for well service flow control with premium alloy steel construction and special coating. Available in manual, hydraulic, electric, handwheel, and manual and hydraulic actuators with nominal sizes 1 to 4 inches.
• Efficient Heating Equipment Super heating equipment for fracturing fluid or other medium in arctic areas with heat exchange rate above 94%. Features 4.1 MW heater, 528 gpm heating capacity, and fuel options including diesel, LPG, CNG, and LNG.
• Hot Oil Unit Hot oil unit for onshore paraffin removal with 1-2.3 MW heater capacity and max working pressure of 10,000 psi. Features intelligent control system with one-key setting and automatic temperature regulation, applicable to HTHP, HTLP, LTHP and LTLP services.
• Cementing Unit Simulator 3D virtual training simulation for cementing unit operations including pressure test, pump preflushes, spacers, drop bottom plug, pump lead and tail slurry, drop top plug, displacement, and bumping pressure for operator training.
• Nitrogen Pumping Unit Simulator 3D virtual training simulation for nitrogen pumping operations including gas lift, nitrogen displacement and purging, acidizing fracturing, foam cementing, and unbalanced drilling for operator training.
• Coiled Tubing Unit Simulator CT operation simulation system for training operators on CT gas lift, sand removal, liquid displacement, acidizing, fracturing, fishing, and equipment installation including lubricator installation, BOP and injector lifting.
• Fracturing Unit And Sand Blender Simulator Simulation system for fracturing operations including conventional fracturing of vertical wells, separate layer fracturing, ball-drop fracturing, abrasive jet fracturing, and stage fracturing of horizontal wells for operator training.
• Oil Separation and Wastewater Treatment Systems Oil separation and wastewater treatment systems for offshore FPSO units. Utilizes Alfa Laval centrifugal separators to meet environmental standards for deepwater development, delivered for Petrobras P84 and P85 FPSO units operating at Atapu and Sepia fields off Brazil.

Quantifiable outcome

• 40% lower maintenance cost compared to diesel fracturing units
• +3 more outcomes

Named customers7 records

Segments4 records

Ideal customer profiles4 records

Technology focussed Yes

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature6 records

Partnerships

Four partnerships are on record, tiered core and minor.

• FTAI AviationcoreStrategic or Co-development Partner · 30 April 2026Joint venture agreement for mobile turbine packaging supporting the MOD 1 commercial launch planned for Q4 2026, with most of the 2027 production capacity already committed. The partnership will produce 100 Mod-1 CFM56 aeroderivative units for the commercial aviation market.
• UAE Ministry of InvestmentcoreStrategic or Co-development Partner · 18 April 2026MoU for developing integrated clean energy and industrial platform in UAE featuring small modular reactor technology, 100,000 tonnes/year anode material manufacturing facility, and lithium battery recycling. Project will be deployed in phases over 3-5 years aligned with UAE Energy Strategy 2050.
• VericorcoreTechnology or IntegrationCooperation for Apollo turbine-driven frac pumper technology. Vericor supplies TF50F turbine engines (5600 hp) powering the JR5000QPW super quintuplex plunger pump for high-efficiency fracturing operations.
• CIMC RafflesminorStrategic or Co-development PartnerJereh delivered oil separation and wastewater treatment systems to CIMC Raffles for integration into P84 and P85 FPSO units operating at Atapu and Sépia fields offshore Brazil.

Scale indicators4 records

Recent moves8 records

Expansion highlights6 records

Broad incumbents

• Halliburton: Major oilfield services and equipment provider with industry-leading pressure pumping, fracturing, drilling and wellhead product lines. Directly comparable to Jereh across the fracturing equipment, wellhead and coiled tubing adjacencies, though Halliburton is far broader and operates its own frac fleets globally.
• SLB (Schlumberger): Global oilfield services and integrated project operator offering drilling, completions, fracturing, wellhead and gas processing technology. Directly comparable to Jereh on EPC-grade gas processing participation (e.g., LNG/pre-treatment) and full-lifecycle wellsite equipment portfolios.
• Baker Hughes: Oilfield services and industrial energy technology company with comparable product lines in wellhead, pressure pumping, turbomachinery and gas processing equipment. Overlaps with Jereh's plunger pumps, wellhead (API 6A) and gas processing equipment bids.

Direct peers

• NOV (National Oilwell Varco): Manufacturer of drilling rigs, wellhead equipment (API spec), pressure pumping equipment and flowline products. Highly comparable product-by-product to Jereh's drilling equipment line (skid-mounted rigs to 9000m), wellhead packages and frac valves/swivel joints.
• ProFrac Holding: Hydraulic fracturing services company operating large frac fleets in US shale basins. Comparable to Jereh's fracturing equipment supply business and a competitor for pressure pumping deployments where Jereh markets its IntelliFrac and Apollo platforms.
• Sinopec Oilfield Equipment (Sinopec Star / SIES): Chinese state-affiliated oilfield equipment manufacturer offering drilling rigs, fracturing, cementing and coiled tubing equipment. Direct competitor to Jereh, particularly on domestic Chinese NOC tenders and emerging-market EPC bids where Jereh also participates.
• Forum Energy Technologies: Manufacturer of subsea, drilling, completions and production equipment including wellhead, frac valves and flowline products. Product-line overlap with Jereh's wellhead, flowline (swivel joints, plug valves) and pressure control equipment.
• Liberty Energy: North American frac services and equipment company with active fleet of hydraulic fracturing spreads. Comparable to Jereh's fracturing unit business and a relevant reference point for adoption of electric and gas-turbine frac pumpers versus diesel fleets.
• CNPC Bohai Equipment Manufacturing / Jereh equivalent: Domestic Chinese oilfield equipment subsidiaries of CNPC producing drilling rigs, cementing units and pressure pumping equipment. Comparable to Jereh in product scope and the Chinese oilfield equipment competitive landscape.
• Weatherford International: Oilfield equipment and services company focused on drilling, evaluation, completions and production with API 6A wellhead and pressure control offerings. Direct competitor to Jereh in wellhead, frac valve, drilling rig and coiled tubing equipment markets.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat5 records

Key risks6 records

Key highlights6 records

Customer concentration

• Xx.com/jerehgroup
• Facebookfacebook.com/JerehEnergyEquipmentandTechnologiesCorporation
• LinkedInlinkedin.com/company/jereh-north-american

Compliance10 records

Revenue estimate

Valuation estimate

Number of profiles

Subsidiaries1 record

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Jereh