Leidal & Hart Mason Contractors

What Leidal & Hart Mason Contractors does

Leidal & Hart Mason Contractors is a privately held, Michigan-based commercial masonry contractor founded in 1957 that delivers new masonry construction, restoration, and repair services across the Midwest. The firm operates full-service branch offices in Livonia, Michigan (headquarters), Delaware, Ohio, and South Bend, Indiana, employing 137 professional masons — described as one of the most skilled and modern masonry crews in the country — supported by a 67-year track record on institutional, federal, higher education, industrial, and commercial projects. Its service portfolio spans brick, block, stone, CMU/CBS construction, stucco, architectural precast, GFRC, glass CMU, adhered and mechanically anchored stone, tile, and a layered set of ancillary building-envelope services including joint sealants, firestopping, waterproofing, air vapor barriers, spray polyurethane foam insulation, and cold-weather masonry techniques.

Technically, the company is a masonry systems specialist rather than a technology platform; its intellectual capital resides in craft expertise, material versatility, and process discipline (LEED certification via the USGBC, moisture and fire management systems, cold-weather protocols). Differentiators cited include cost and schedule performance, an unusually large in-house skilled-trade workforce for the trade, and demonstrable execution on projects such as Morris Inn at the University of Notre Dame, the Daxton Hotel, The Book Depository, and partnerships with general contractors including Barton Malow Builders. Distribution is direct enterprise field sales to general contractors, property owners, and institutions across Michigan, Ohio, and Indiana.

Revenue is generated through project-based professional services contracts (custom, quote-driven, multi-year in cadence) across five primary verticals: commercial properties (primary), higher education, federal, industrial, and sports and special events. Marketing is predominantly content-driven, centered on an SEO-optimized Knowledge Hub and direct field sales through the three branch offices. The firm is privately held with no disclosed funding rounds, parent company, institutional investors, or acquisition activity, and revenue and ownership details are not publicly disclosed.

Name

Leidal & Hart Mason Contractors

Legal name

Leidal and Hart

Website

https://leidalandhart.com

Company type

Private

Founded year

1957

Operating status

Operating

Headcount range

101–250 employees

Short description

Leidal & Hart Mason Contractors is a privately held, 67-year-old Michigan-based commercial masonry contractor operating from three Midwest branch offices with 137 professional masons, delivering new masonry construction, restoration, and specialty building-envelope services to general contractors and institutions across Michigan, Ohio, and Indiana.

Ownership category

akta.pro rank

Product category

Commercial Masonry Construction Services

NAICS

Masonry Contractors (238140), Masonry Contractors (23814)

SIC

Construction - Special Trade Contractors (1700)

akta.pro primary industry

Chimney, Parapet & Roofline Masonry Repair (HSAPAKAL)

akta.pro secondary industry

Primers, Bonding Agents & Surface Preparation Products (IMADAOAK)

Keywords

• Commercial masonry construction
• Brick and block installation
• Masonry restoration services
• Concrete masonry units
• Stone masonry contractors

Headquarters

HQ city

Livonia

HQ country

United States

HQ region

North America

Offices3 records

Markets served

GTM type

B2B

Offering type

Services

Cost components

Personnel, Operations, Supply Chain, Marketing or Sales, Others

Revenue model

1. Commercial Masonry Construction Services: Project-based masonry construction services for commercial buildings including new masonry construction, renovations, and specialized masonry systems. Revenue generated through direct contracts with general contractors, property owners, and institutions for masonry projects ranging from additions to large-scale new construction.

Pricing tiers

Go-to-market motion1 record

Distribution channels1 record

Marketing channels2 records

Core offering

Leidal & Hart is a commercial masonry contractor providing new masonry construction, masonry restoration and repair, and ancillary masonry services such as joint sealants, firestopping, waterproofing, air vapor barriers, and spray polyurethane foam insulation. The company works with brick, block, stone, concrete masonry units, stucco, architectural precast, GFRC, glass CMU, tile, adhered stone, and mechanically anchored stone, serving general contractors, property owners, and institutions across Michigan, Ohio, and Indiana from full-service branch offices.

Product overview

Leidal & Hart is a masonry systems specialist offering a comprehensive portfolio of construction and specialty services. The core offerings span new masonry construction and masonry restoration/repair, supported by a full range of ancillary services including joint sealants, firestopping, waterproofing, cold weather protection, air vapor barriers, and spray polyurethane foam insulation. The company works with diverse materials including brick, block, architectural precast, glass fiber reinforced concrete (GFRC), glass concrete masonry units (glass CMU), tile, adhered stone, and mechanically anchored stone. The product portfolio is organized around two primary pillars: New Masonry Construction (covering CMU work, CBS construction, stucco, stone masonry, GFRC, glass CMU, and architectural precast) and Masonry Restoration & Repair (including brick pointing, tuckpointing, repointing, efflorescence treatment, and masonry anchors installation). Supported by technical ancillary services for moisture management, fire safety, and thermal performance, the company serves commercial, federal, higher education, and industrial markets from full-service branch offices in Livonia, Michigan; Columbus, Ohio; and South Bend, Indiana. With 67 years of experience and 137 professional masons, the company is LEED certified and specializes in projects ranging from The Book Depository and Daxton Hotel to Morris Inn at the University of Notre Dame.

Differentiator

Problem solved

Functional benefit

Products and services

• General Masonry Services Comprehensive masonry construction services spanning new builds, renovations, and repairs for commercial projects using brick, stone, and concrete applications.
• New Masonry Construction Greenfield masonry construction services creating solid, durable, and visually stunning structures using traditional and innovative materials including brick, block, architectural precast, and GFRC.
• Masonry Restoration and Repair Repair and revitalization of brick, stone, or concrete structures to restore original strength and aesthetic appeal, including tuckpointing, repointing, and waterproofing.
• Masonry Veneer Installation Installation of thin brick, stone, or manufactured masonry veneer as decorative, non-load-bearing exterior finishes over structural frames.
• Concrete Block Structure (CBS) Construction Construction using concrete masonry units (CMUs) as load-bearing structural walls, common in commercial buildings for strength, fire resistance, and longevity.
• Concrete Masonry Unit (CMU) Work Construction using pre-cast concrete blocks for structural walls, foundations, firewalls, and sound barriers in commercial applications.
• Stucco Application Cement-based plaster exterior finish applied to walls for weather-resistant and decorative coating on commercial buildings.
• Stone Masonry Natural and manufactured stone installation including granite, limestone, and sandstone for facades and architectural details.
• Masonry Anchors and Ties Installation Installation of mechanical anchors, chemical anchors, veneer ties, and adjustable anchors for securing brick and masonry facades to structural frames.
• Brick Pointing Maintenance service involving repair and renewal of mortar joints in brick masonry to prevent water infiltration and extend structure life.
• Efflorescence Treatment Removal and prevention of white salt deposits on brick surfaces caused by water-soluble salt crystallization.
• Joint Sealants Sealant application for masonry control joints and expansion joints to manage cracking and prevent water intrusion in commercial walls.
• Firestopping Fire-resistant sealing of penetrations and joints in masonry construction to meet building code fire safety requirements.
• Waterproofing Moisture barrier and waterproofing treatments for masonry walls to prevent water damage and extend building lifespan.
• Cold Weather Protection Specialized procedures and materials for masonry work in low-temperature conditions to ensure proper curing and structural integrity.
• Air Vapor Barriers Installation of air and vapor control layers in masonry wall assemblies for energy efficiency and moisture management.
• Spray Polyurethane Foam Insulation Foam insulation application within masonry cavity walls for enhanced thermal performance in commercial buildings.
• Glass Fiber Reinforced Concrete (GFRC) Installation of lightweight, flexible, and robust GFRC panels offering design versatility for architectural features.
• Glass Concrete Masonry Units (Glass CMU) Installation of translucent concrete blocks providing light-enhancing solutions for modern commercial designs.
• Architectural Precast Installation of pre-cast concrete panels for facades and structural elements with design flexibility and quick installation.
• Tile Work Precision tile installation for commercial interiors and exteriors using masonry techniques.
• Adhered Stone Installation of thin stone veneer adhered directly to wall substrates for aesthetic stone appearance without structural weight.
• Mechanically Anchored Stone Stone installation using mechanical anchors for secure attachment to structural backing in demanding applications.

Quantifiable outcome

• Reduces costs on materials and labor
• +1 more outcomes

Named customers4 records

Segments5 records

Ideal customer profiles5 records

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature7 records

Partnerships

One partnership is on record.

• United States Green Building Council (USGBC)coreStrategic or Co-development PartnerLEED certification partnership demonstrating commitment to sustainable construction practices. Masonry recognized as the most sustainable and most environmentally friendly wall system that optimizes energy performance.

Scale indicators3 records

Recent moves5 records

Expansion highlights5 records

Direct peers

• Maesano Buschmann & Co. Illinois-based commercial masonry contractor serving the Midwest with comparable scope across new construction and restoration on institutional, commercial, and industrial projects. Operates as a specialty trade contractor similar to Leidal & Hart.
• Wieser Brothers General Contractor: Wisconsin-based commercial construction firm with a strong masonry division serving institutional, industrial, and commercial clients across the upper Midwest. Closely comparable regional footprint, customer mix, and masonry-centric delivery model.
• C.A. Lindman & Sons: Iowa-based commercial masonry contractor with deep Midwest roots serving commercial, healthcare, education, and industrial projects. Comparable specialty-trade positioning and regional Midwest footprint to Leidal & Hart.
• L.H. Woods & Sons: Indiana-based commercial masonry contractor with a long operating history serving institutional, commercial, and industrial clients across the Midwest. Directly comparable in service mix and Indiana regional overlap with Leidal & Hart's South Bend branch.
• Dee Brown, Inc. Large Texas-based commercial masonry contractor working on healthcare, higher education, hospitality, and corporate office projects nationwide. Comparable in service scope and institutional client focus, though operating at significantly larger scale.
• Pullman Services (SST): National commercial masonry and concrete restoration contractor serving commercial, institutional, and industrial clients across the U.S. Directly comparable in new construction and restoration/repair service mix at a larger geographic scale.
• T.F. Beck & Associates: Illinois-based commercial masonry contractor serving the Chicago area and broader Midwest on institutional, commercial, and industrial projects. Comparable specialty-trade service model with regional Midwest overlap.
• Brazos Masonry: Texas-based commercial masonry contractor serving education, healthcare, hospitality, and large-scale commercial developments. Comparable in scope (brick, block, stone, CMU) and institutional client base, though operating in a different regional market.
• Champion Masonry & Waterproofing: Midwest commercial masonry and waterproofing contractor offering new construction, restoration, and envelope services. Comparable service portfolio overlap with Leidal & Hart's restoration and waterproofing offerings.
• Midwest Masonry, Inc. Kansas City-area commercial masonry contractor serving institutional, commercial, and industrial clients across the central Midwest. Comparable in service mix and regional Midwest positioning.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat4 records

Key risks6 records

Key highlights6 records

Customer concentration

Compliance1 record

Revenue estimate

Valuation estimate

Number of profiles

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Leidal & Hart Mason Contractors