Dynamic Isolation Systems
- Company typePrivate
- Founded1982
- HeadquartersNevada, United States
- Headcount101–250
- GTM typeB2B
- OfferingHardware or Manufacturing
What Dynamic Isolation Systems does
Dynamic Isolation Systems (DIS), founded in 1982 and headquartered in McCarran, Nevada, designs, manufactures, and supplies custom seismic isolation and energy-dissipation hardware for critical infrastructure projects worldwide. Its core technology portfolio includes Lead Rubber Bearings (LRBs) with lead-core damping, PTFE-on-stainless-steel sliding isolators, Viscous Wall Dampers (VWD), Low Mass Isolation Systems for lighter structures and equipment, Floor Isolation Systems, and patented 3D isolation that protects against vertical as well as horizontal accelerations. Isolators are custom-manufactured in sizes from 12 to 60 inches in diameter with load capacities up to 4,000 tons, and are validated through shake-table testing partnerships with UCSD, UNR, SUNY Buffalo, and Japan's NRC-funded E-Defense facility, along with JSSI certification for the Japanese market.
DIS sells primarily through a direct enterprise motion targeting structural engineers, government agencies, and construction firms on long-cycle projects — hospitals, bridges, historic landmarks, data centers, emergency centers, museums, nuclear facilities, and marine structures — with custom quote-based pricing per project and multi-year contracts covering feasibility studies, value engineering, custom design, manufacturing, and installation support. The company operates a 60,000 sq ft manufacturing plant in McCarran, Nevada, processes more than 2,000 tons of steel per year, and has supplied over 24,000 isolators across more than 500 projects in 22–23 countries, including the Golden Gate Bridge, San Francisco City Hall, the Tan Tzu Medical Center in Taiwan, JFK Light Rail, and the New Zealand Parliament Buildings. International sales are supported by regional representatives in Japan, Taiwan, Colombia, India, Mexico, Peru, and Turkey, with Japan alone accounting for 170+ projects and licensing of DIS's VWD technology. The company is privately held under President Konrad Eriksen and discloses no revenue, headcount, or ownership structure.
Dynamic Isolation Systems firmographics
Firmographics- Name
- Dynamic Isolation Systems
- Legal name
- Dynamic Isolation Systems, Inc.
- Website
- https://dis-inc.com
- Company type
- Private
- Founded year
- 1982
- Operating status
- Operating
- Headcount range
- 101–250 employees
- Ownership category
- akta.pro rank
Dynamic Isolation Systems industry classification
Industry- Product category
- Seismic Isolation Systems
- NAICS
- Overhead Traveling Crane, Hoist, and Monorail System Manufacturing (333923)
- SIC
- Ball & Roller Bearings (3562)
- akta.pro primary industry
- Lifting Attachments & Material Handling Accessories (Fork Attachments, Slings, Rigging) (IMAHABAJ)
Keywords
Where Dynamic Isolation Systems is headquartered
LocationHeadquarters
- HQ city
- Nevada
- HQ country
- United States
- HQ region
- North America
Offices2 records
Markets served
Dynamic Isolation Systems business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Supply Chain, Operations, Personnel, Technology or R&D, Marketing or Sales
Revenue model
- Custom Seismic Isolators: Design, manufacture, and supply of custom seismic isolation bearings, dampers, and hardware for specific infrastructure projects. Isolators manufactured in sizes from 12-60 inches diameter with capacities up to 4,000 tons. One-time project-based revenue from engineering and construction firms, government agencies, and building owners.
- Technical Services: Technical support, feasibility studies, budget development, and value engineering services provided during project design phases. Engineering support for structural modeling and analysis.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Other | Multi-year contract | Custom project-based pricing |
Go-to-market motion1 record
Distribution channels2 records
Marketing channels5 records
Dynamic Isolation Systems product offering
Product offeringCore offering
Dynamic Isolation Systems designs, manufactures, and supplies custom seismic isolation bearings, dampers, and isolation systems for buildings, bridges, hospitals, and critical infrastructure. The company produces laminated rubber and steel Lead Rubber Bearings with lead cores, PTFE sliding isolators, Viscous Wall Dampers, low mass and floor isolation systems, and supporting steel hardware from its 60,000 sq ft Nevada facility. DIS also provides technical support, feasibility studies, budget development, and value engineering services throughout the project lifecycle.
Product overview
Dynamic Isolation Systems offers a comprehensive portfolio of seismic isolation products designed to protect structures from earthquake damage. The core product line consists of Base Isolators (Lead Rubber Bearings and sliding bearings) and Sliding Isolators, which form the foundation of seismic protection systems. These are complemented by Viscous Wall Dampers for damping in taller, flexible structures, and specialized Low Mass Isolation Systems for data centers and lighter equipment. The Floor Isolation System protects building contents within non-isolated structures. Supporting products include hardware components such as mounting plates, anchor bolts, and specialty bearings. The company operates a 60,000 square-foot manufacturing facility in Reno, Nevada.
Differentiator
Problem solved
Functional benefit
Quantifiable outcome
- Foundation forces reduced by up to 75% in bridges, resulting in 50% fewer piles and 3.5x reduction in concrete and steel
- +6 more outcomes
Companies that use Dynamic Isolation Systems
Customer profileNamed customers14 records
Segments8 records
Ideal customer profiles5 records
Dynamic Isolation Systems technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature6 records
Dynamic Isolation Systems partnerships and signals
Strategic signalPartnerships
13 partnerships are on record, tiered core and minor.
- UC San Diego (UCSD)coreDIS conducts isolator testing at UCSD's SRMD testing facility. Testing performed to one meter lateral displacement with 400% shear strain demonstrated for Xindian Hospital. Prototype Viscous Wall Damper tests performed at UCSD for OSHPD review. High-speed testing capabilities at actual earthquake velocities.
- University of Nevada, Reno (UNR)coreOver 200 shake table tests at DBE and MCE levels performed on Low Mass Isolation System. Extensive testing of spring components and system characterization. Full-scale curved bridge testing at 300% and 250% MCE. Tests with up to 3g input accelerations for SAC motions.
- SUNY BuffalocoreTesting partner for Low Mass Isolation System alongside UNR. Shake table testing performed to verify system performance and spring component properties with unique hysteresis loops.
- Nuclear Regulatory Commission (NRC)coreDIS conducted full-size structure testing on world's largest shake table in Kobe, Japan for NRC. $500M test facility capable of replicating Magnitude 8.0 earthquake supporting structures up to 1000 tons. Tests used earthquakes likely at US nuclear facilities including 2011 Tohoku Earthquake. 175% MCE test for Vogtle site with 1.6g peak ground acceleration. Accelerations reduced by factor of 3+.
- Aseismic Devices Co., Ltd. (Japan)coreJapan regional representative. President Hisaya Tanaka. Licensed to provide Viscous Wall Damper technology in Japan with 20+ years of use in 100+ projects. DIS has supplied 130+ projects in Japan.
- CaltranscoreState-of-the-art test facility built at UC San Diego for Caltrans toll bridge retrofit program. First test rig capable of testing bearings at actual earthquake velocities. Custom bridge bearings developed for Oakland Bay Bridge with increased corrosion resistance using low permeability rubber and stainless steel construction.
- JSSI (Japan Seismic Isolation Structural Engineering Association)coreRigorous testing conducted to obtain JSSI Certification in Japan. 400% shear strain testing standard exceeded for isolator certification. Multiple projects in Japan required JSSI compliance.
- EUR Consulting & Development, Inc. (Colombia)minorRegional representative for Colombia market. President Eloy U. Retamal, S.E. Located in Torrance, California serving Colombian projects.
- Diggeo Seismic Solutions (India)minorRegional representative for India market. Contact Raman Dogra in New Delhi. GTB Hospital in India isolated in response to hospitals collapsed by Magnitude 7.7 Bhuj Earthquake in 2001.
- Detek Internacional S.A. de C.V. (Mexico)minorRegional representative for Mexico market. Patria Aqueducto Bridge in Guadalajara and Mexicali Bridge projects completed. Foundation cost reductions of 50%+ achieved on Mexican bridge projects.
- CDV Ingenieria Antisismica (Peru)minorRegional representative for Peru market. Contact Ing. David Quispe in Lima.
- Strong Solid Enterprise Co., Ltd. (Taiwan)coreRegional representative for Taiwan. Tan Tzu Medical Center (1.7 million sq ft, largest isolated structure) and other Taiwan hospital projects completed.
- EM-KE Insaat Taah. San. ve Tic. Ltd. (Turkey)minorRegional representative for Turkey. Erzurum Hospital project completed in Eastern Turkey for Turkish Ministry of Health.
Scale indicators11 records
Recent moves6 records
Expansion highlights6 records
Dynamic Isolation Systems competitors and assessment
Company assessmentDirect peers
- Maurer SE: German manufacturer of structural protection systems including seismic isolators and dampers. Direct competitor in European and international seismic isolation projects.
- FIP Industriale SpA: Italian manufacturer of structural bearings and seismic isolators for bridges and buildings. Direct competitor in laminated rubber and sliding bearings for infrastructure projects.
- Bridgestone Corporation: Japanese manufacturer of seismic isolation rubber bearings, dominant in Japanese market where DIS also has strong presence. Direct competitor in laminated rubber bearings for buildings and bridges.
- Sumitomo Rubber Industries: Japanese manufacturer of high-damping rubber bearings and seismic isolation products. Direct competitor in Japanese seismic isolation market where DIS has 170+ projects.
- Taylor Devices Inc. US-based manufacturer of shock absorbers, viscous dampers, and seismic protection devices. Direct competitor in dampers and energy dissipation devices for structural applications.
- Earthquake Protection Systems (EPS): California-based manufacturer of seismic isolation bearings using similar laminated rubber and lead core technology. Direct head-to-head competitor in North American seismic isolation bearing market.
- Mageba SA: Swiss manufacturer of structural bearings, expansion joints, and seismic devices for bridges and buildings. Direct competitor in international infrastructure seismic isolation market.
Broad incumbents
- Trelleborg AB: Swedish engineered polymer solutions provider with seismic isolation bearings as part of broader infrastructure portfolio. Larger diversified incumbent with overlapping seismic protection products.
Emerging players
- Kinetics Noise Control: US manufacturer of vibration isolation and seismic restraint products for buildings and equipment. Emerging player focused on non-structural isolation with adjacent technology.
- GERB (Gesellschaft für Isolierung mbH): German manufacturer of vibration isolation systems for buildings and industrial applications. Emerging player with partial overlap in vibration and seismic isolation technology.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat5 records
Key risks5 records
Key highlights7 records
Customer concentration
Dynamic Isolation Systems compliance and trust
Trust signalCompliance1 record
Dynamic Isolation Systems financial estimates
Financial estimateRevenue estimate
Valuation estimate
Dynamic Isolation Systems leadership team
Management profileNumber of profiles
Profiles2 records
Dynamic Isolation Systems funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Dynamic Isolation Systems M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Dynamic Isolation Systems
What does Dynamic Isolation Systems do?
Dynamic Isolation Systems designs, manufactures, and supplies custom seismic isolation bearings, dampers, and isolation systems for buildings, bridges, hospitals, and critical infrastructure. The company produces laminated rubber and steel Lead Rubber Bearings with lead cores, PTFE sliding isolators, Viscous Wall Dampers, low mass and floor isolation systems, and supporting steel hardware from its 60,000 sq ft Nevada facility. DIS also provides technical support, feasibility studies, budget development, and value engineering services throughout the project lifecycle.
Is Dynamic Isolation Systems a public or private company?
Dynamic Isolation Systems is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was Dynamic Isolation Systems founded?
Dynamic Isolation Systems was founded in 1982. It employs 101 to 250 people.
Where is Dynamic Isolation Systems based?
Dynamic Isolation Systems is headquartered in Nevada, United States, in the North America region.
How does Dynamic Isolation Systems make money?
Two revenue lines are on record. Custom Seismic Isolators are the primary driver. The others are technical Services.
Who are Dynamic Isolation Systems's main competitors?
Direct peers on record are Maurer SE, FIP Industriale SpA, Bridgestone Corporation, Sumitomo Rubber Industries, Taylor Devices Inc., Earthquake Protection Systems (EPS) and Mageba SA. Trelleborg AB is listed as a broad incumbent. Emerging players are Kinetics Noise Control and GERB (Gesellschaft für Isolierung mbH).
Does Dynamic Isolation Systems have an API?
No public API is recorded for Dynamic Isolation Systems.
What industry is Dynamic Isolation Systems in?
Dynamic Isolation Systems's product category is Seismic Isolation Systems. Its primary akta.pro industry code is IMAHABAJ, Lifting Attachments & Material Handling Accessories (Fork Attachments, Slings, Rigging). Its NAICS code is 333923 and its SIC code is 3562.