Developer docs
API playgroundTry for free, no card

Search company profiles

Injection Point

Full company profile

uuid000pavw

Namestring
Injection Point
Legal namestring
Injection Point S.r.l.
Company typeenum
Private
Founded yearint
2001
Descriptiontext

Injection Point S.r.l. is a privately held Italian B2B manufacturer specialising in hot runner systems for thermoplastic injection moulding. Founded in 2001 by Sergio Pozzan — who brought 26 years of experience from PLASTHING S.A.S. — the company operates from a single facility at Strada San Giorgio 21/c, Settimo Torinese (Turin), where all products are designed and manufactured. It is structured as an Italian Società a responsabilità limitata with a stated share capital of €10,000 and is owned and operated by the Pozzan family.

The product portfolio centres on four interchangeable bushing families (IPS and FLS single bushings, IPM and FLM multiple bushings), filter nozzles (IPF 300/1000/2000/2010/4000) for contaminated thermoplastics, custom-built hot runner manifolds from small dimensions up to 2,300mm in both open-flow and valve-gate configurations, and complementary components (24V/240V cartridge and coil heaters, J/K thermocouples, TP100 thermoprobes). Injection Point is also the exclusive Italian dealer for EFI thermoregulation units (CM8 model) and produces custom special parts to customer drawings. The interchangeable component architecture, dual-voltage options and titanium-coated/special-alloy variants for filled or aggressive materials (glass fibres, PVC, fluoropolymers) define the technical differentiation.

The business model is sales-led and project-based: customers specify mould dimensions and material requirements, the Design Department engineers the hot runner solution, and the factory produces it. Pricing is opaque and quote-based, with sales conducted directly from Settimo Torinese to Italian mould builders and injection moulding manufacturers, supplemented by a UK distribution partnership with Prima Sales & Services Limited (Beckenham, Kent) for English-speaking markets. Revenue streams consist of hardware sales (proprietary bushings, filters, heaters, thermocouples), exclusive resale of EFI control units with associated after-sales service, and bespoke custom-part manufacturing. No revenue, headcount, funding or M&A disclosures are available publicly.

Short descriptiontext

Injection Point S.r.l. is an Italian B2B manufacturer of hot runner systems, interchangeable bushings, filter nozzles, heaters, thermocouples, and EFI thermoregulation units for thermoplastic injection moulding, serving mould builders and plastic processors from Settimo Torinese and via UK distribution.

Operating statusenum
Operating
Ownership categoryenum
Headcount rangeband
1–10
akta.pro rankint
HeadquartersSettimo Torinese, Italy
HQ citystring
Settimo Torinese
HQ countrystring
Italy
HQ regionstring
Europe
Markets served

Serves global market

Offices1 record

Each record includes

City, Country, Type, Description, Source

Keyword5 values
hot runner systems, injection moulding components, thermoplastic bushings, filter nozzles plastics, thermoregulation controllers
Industry2 codes
PRIMARYIMAHAKAD
Boilers, Furnaces & Process Heating Equipment
SECONDARYIMAHAEAC
Heat Transfer Equipment (Heat Exchangers, Boilers, Condensers)
NAICS code1 code
  • Industrial Process Furnace and Oven Manufacturing333994
SIC code1 code
  • Industrial Process Furnaces & Ovens3567
Product category
Industrial Plastic Injection Moulding Components
Social media profiles1 record
GTM motion1 record

Each record includes

Type, Description, Source

Revenue model5 records
1Hot Runner Systems and Bushings Manufacturing
TypeHardware Sales
Description

Injection Point manufactures and sells hot runner systems, including IPS single bushings, FLS single bushings, IPM multiple bushings, and FLM multiple bushings for thermoplastic injection moulding. Products are customizable to customer specifications and dimension requirements. All components are totally interchangeable within each product line.

injectionpoint.com
2Filter Nozzles
TypeHardware Sales
Description

Production and sale of unique filter nozzles designed to eliminate contaminated thermoplastic material. Available in multiple types (300, 1000, 2000, 2010, 4000) with titanium-coated options for filled materials.

injectionpoint.com
3EFI Thermoregulation Units (Exclusive Italy)
TypeHardware Sales
Description

Injection Point is the exclusive dealer for Italy (for sale and assistance) of EFI thermoregulation units, which are compatible with all 240V injection systems. This represents both a product revenue stream and after-sales service revenue.

injectionpoint.com
4Heaters and Thermocouples
TypeHardware Sales
Description

Resale of 24V and 220V heaters, with or without type J or K thermocouples, and TP100 thermoprobes. Sold as spare parts for own products and per specific customer requests.

injectionpoint.com
5Special Application Custom Parts
TypeProfessional Services
Description

Custom special parts manufactured on customer specifications, providing optimization and customization services in the injector sector.

injectionpoint.com
Marketing channels4 records

Each record includes

Title, Type, Stage, Description, Source

Distribution channels3 records

Each record includes

Title, Type, Scope, Target buyer, Description, Source

Cost components5 values
Personnel, Supply Chain, Operations, Technology or R&D, Marketing or Sales
GTM typeB2B
B2B
Offering typeHardware or Manufacturing
Hardware or Manufacturing
Core offering1 text field

Injection Point S.r.l. manufactures hot runner systems and injection moulding components (IPS/FLS single bushings, IPM/FLM multiple bushings, IPF filter nozzles) plus 24V/240V cartridge heaters and type J/K thermocouples for the thermoplastic processing industry, with all components made in Italy at the Settimo Torinese facility. The company builds custom-engineered hot runner manifolds up to 2300mm and serves as the exclusive Italian dealer for EFI thermoregulation units (CM8).

Differentiator
Functional benefit
Problem solved
Product overview1 text field

Injection Point S.r.l. is an Italian manufacturer specializing in hot runner systems and injection molding components, founded in 2001 and based in Settimo Torinese, Turin. The product portfolio consists of: (1) Hot runner systems (canali caldi) in open flow and valve gate configurations for all thermoplastic materials, from small manifolds up to 2300mm; (2) A comprehensive range of injection bushings including IPS and FLS single bushings, and IPM and FLM multiple bushings with totally interchangeable components across types; (3) Filter nozzles (IPF series) for eliminating contaminated thermoplastic material; (4) Temperature control components including 24V/220V cartridge heaters and J/K type thermocouples; (5) EFI thermoregulation/control units (CM8) as exclusive Italian reseller. The company also offers custom special applications per customer specifications. All products are manufactured in Italy at the headquarters in Settimo Torinese.

Product and service10 records
1IPS Single Bushings
CategoryInjection Moulding Components
Description

IPS-type direct-injection single bushings made for thermoplastic injection moulding. All IPS components are totally interchangeable with each other, simplifying spares and maintenance. Target customers are mould builders and injection moulding manufacturers.

2FLS Single Bushings
CategoryInjection Moulding Components
Description

FLS open-flow single bushings (FLS3, FLS7, FLS10) designed for thermoplastic injection moulding. Components are totally interchangeable, with integrated 240V spiral heater and separate thermocouple for precise temperature control.

3IPM Multiple Bushings
CategoryInjection Moulding Components
Description

IPM multiple bushings for direct injection with hot runner manifold (camera calda). All components are totally interchangeable and IPM-A variants can be supplied with special multi-tips including edgegates and forward feed, dual-voltage (24V internal / 240V band).

4FLM Multiple Bushings
CategoryInjection Moulding Components
Description

FLM open-flow multiple bushings (FLM3, FLM7, FLM10) used with custom hot runner manifolds. All FLM components are totally interchangeable; valve gate variants are available with 240V spiral heater and separate front thermocouple.

5IPF Filter Nozzles
CategoryInjection Moulding Components
Description

IPF filter nozzle family (IPF 300, 1000, 2000, 2010, 4000) designed to eliminate contaminated thermoplastic material and prevent blocked feed holes and physical damage to injection bushings. All filter components are fully interchangeable; titanium coating and hardened internal sleeves are available for glass/fibre-filled and aggressive materials.

6Hot Runner Systems
CategoryHot Runner Systems
Description

Custom hot runner injection systems (open flow and valve gate configurations) built to customer-specified dimensions, ranging from small manifolds to 2300mm manifolds and suitable for all thermoplastic materials including filled and aggressive grades.

724V and 220V Heaters
CategoryTemperature Control Components
Description

24V and 220V cartridge heaters (with or without type J or K thermocouples, or TP100 thermowells when required), sold as spare parts for Injection Point products and on customer specification.

8Thermocouples and Thermoprobe
CategoryTemperature Control Components
Description

Type J and K thermocouples, and TP100 thermoprobes when needed, supplied as spare parts for Injection Point products or per specific customer requests.

9EFI CM8 Thermoregulation Units (Exclusive Italian Dealership)
CategoryThermoregulation Controllers
Description

Injection Point is the exclusive Italian dealer (sale and assistance) for EFI CM8 thermoregulation units. The units are compatible with all 240V injection systems and with both K and J type thermocouples, completing the company's hot runner temperature-control ecosystem.

10Special Application Custom Parts
CategoryCustom Manufacturing Services
Description

Custom special parts and components manufactured to customer specifications for injector applications, providing complete optimisation and customisation services in the injector sector.

Scale indicator3 records

Each record includes

Type, Value, Description, Source

Partnership2 partners
1Prima Sales & Services Limited
Strategic tierCoreTypeChannel Partner/ Reseller/ Distributor
Description

Prima Sales & Services Limited is located at 87 Forster Road, Beckenham, Kent BR3 4LG, England. They serve as the distribution partner for Injection Point products in the England market, handling sales and potentially service support. Contact: Tel: 0044 0208 658 1613, Email: prima1613@aol.com.

injectionpoint.com
Strategic tierCoreTypeTechnology or Integration
Description

EFI Ltd is located at 46 Melbourne Road, Lowestoft, Suffolk, NR32 1st, England. While primarily a technology partner whose products (thermoregulation units) Injection Point distributes, EFI also appears on the partnership page suggesting mutual technical and commercial collaboration. EFI manufactures thermoregulation controllers compatible with 240V injection systems and type J/K thermocouples. Contact: Tel: 01502 518397, Email: sales@efisystems.co.uk; support@efisystems.co.uk.

Recent move5 records

Each record includes

Date, Type, Title, Description, Source

Expansion highlight4 records

Each record includes

Type, Description

Peers10 records
1INCOE Corporation
TypeDirect peer
Description

US-based hot runner manufacturer specializing in valve gate and hot half systems for injection moulding. Comparable product portfolio (bushings, manifolds, controllers) and serves the same thermoplastic moulding customer base as Injection Point.

2Ewikon
TypeDirect peer
Description

German specialist in hot runner systems and valve gate technology for injection moulding, with proprietary side-gate and needle-shut-off solutions. Direct competitor for high-cavitation, custom hot runner projects.

TypeDirect peer
Description

One of the world's largest hot runner system manufacturers, offering complete hot runner, manifold, and temperature control solutions for thermoplastic injection moulding — directly overlapping Injection Point's core product range across all mould sizes and configurations.

TypeDirect peer
Description

Global supplier of hot runner systems and temperature controllers for injection moulding, offering both open flow and valve gate technology. Directly competes with Injection Point across European mould builders and OEMs.

TypeDirect peer
Description

German manufacturer of hot runner systems with a strong reputation for high-cavitation manifolds and valve gate technology. Directly comparable product offering and serves overlapping European mould builder customers.

6HRS (Hot Runner Systems)
TypeDirect peer
Description

German hot runner systems manufacturer offering open flow and valve gate technology with a strong European mould builder customer base. Direct competitor in the European custom hot runner market served by Injection Point.

TypeDirect peer
Description

Korean-based global supplier of hot runner systems, manifolds, and temperature controllers with growing European footprint. Direct peer competing in standardized and custom hot runner solutions for injection moulders.

8PCS Company
TypeDirect peer
Description

US supplier of hot runner components, mould components, and hot half systems for injection moulding. Comparable product portfolio across bushings, heaters, thermocouples, and manifold assemblies.

TypeDirect peer
Description

New Zealand-based hot runner systems manufacturer with a focused product line of valve gate and open flow systems for injection moulding. Comparable mid-sized competitor targeting custom mould projects.

10THERMOPLAY (INglass Group)
TypeDirect peer
Description

Italian-headquartered hot runner systems manufacturer (part of INglass Group) with deep expertise in valve gate and multi-cavity hot runner technology. A direct competitor with home-market Italian presence analogous to Injection Point.

Market position
Strengths4 records

Each record includes

Headline, Details, Source

Weaknesses5 records

Each record includes

Headline, Details, Source

Competitive moat4 records

Each record includes

Type, Details

Key risks5 records

Each record includes

Headline, Details, Source

Key highlights6 records

Each record includes

Headline, Details, Source

Customer concentration

Classification, Details

Segment3 records

Each record includes

Title, Type, Primary, Description, Pain point addressed, Use case, Source

Ideal customer profile3 records

Each record includes

Profile, Firmographic size, Sales motion, Sales cycle length, Buying structure, Purchase trigger, Buyer persona, Geography, Industry vertical, Primary use case, Description, Pain points, Evidence proof points, Target buyer

Technology focused
No
API detail
Has APIbool
No

Docs URL, Description

AI maturity
App detail

Has app

Feature6 records

Each record includes

Title, Differentiator, Description, Source

Core technology
Revenue estimate
Valuation estimate
Number of profiles
Profiles4 records

Each record includes

Name, Designation, Designation category, Overview, Profile commentary, Source

No data
No data
Funding overview

Funding stage, Last funding date, Total funding USD

Funding rounds

Each record includes

Round, Amount USD, Date, Pre money valuation, Total investors, Investors, News

Investors

Each record includes

Name, Type, Date of entry, Rounds participated, Website

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Each record includes

Name, Acquisition type, Announced date, Completed date, Status, Website, News

Investment

Each record includes

Name, Round, Announced date, Lead investor, Website, News

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Injection Point

Industrial Plastic Injection Moulding Componentsinjectionpoint.com

Injection Point S.r.l. is an Italian B2B manufacturer of hot runner systems, interchangeable bushings, filter nozzles, heaters, thermocouples, and EFI thermoregulation units for thermoplastic injection moulding, serving mould builders and plastic processors from Settimo Torinese and via UK distribution.

What Injection Point does

Injection Point S.r.l. is a privately held Italian B2B manufacturer specialising in hot runner systems for thermoplastic injection moulding. Founded in 2001 by Sergio Pozzan — who brought 26 years of experience from PLASTHING S.A.S. — the company operates from a single facility at Strada San Giorgio 21/c, Settimo Torinese (Turin), where all products are designed and manufactured. It is structured as an Italian Società a responsabilità limitata with a stated share capital of €10,000 and is owned and operated by the Pozzan family.

The product portfolio centres on four interchangeable bushing families (IPS and FLS single bushings, IPM and FLM multiple bushings), filter nozzles (IPF 300/1000/2000/2010/4000) for contaminated thermoplastics, custom-built hot runner manifolds from small dimensions up to 2,300mm in both open-flow and valve-gate configurations, and complementary components (24V/240V cartridge and coil heaters, J/K thermocouples, TP100 thermoprobes). Injection Point is also the exclusive Italian dealer for EFI thermoregulation units (CM8 model) and produces custom special parts to customer drawings. The interchangeable component architecture, dual-voltage options and titanium-coated/special-alloy variants for filled or aggressive materials (glass fibres, PVC, fluoropolymers) define the technical differentiation.

The business model is sales-led and project-based: customers specify mould dimensions and material requirements, the Design Department engineers the hot runner solution, and the factory produces it. Pricing is opaque and quote-based, with sales conducted directly from Settimo Torinese to Italian mould builders and injection moulding manufacturers, supplemented by a UK distribution partnership with Prima Sales & Services Limited (Beckenham, Kent) for English-speaking markets. Revenue streams consist of hardware sales (proprietary bushings, filters, heaters, thermocouples), exclusive resale of EFI control units with associated after-sales service, and bespoke custom-part manufacturing. No revenue, headcount, funding or M&A disclosures are available publicly.

Injection Point firmographics

Firmographics
Name
Injection Point
Legal name
Injection Point S.r.l.
Website
https://injectionpoint.com
Company type
Private
Founded year
2001
Operating status
Operating
Headcount range
1–10 employees
Short description
Injection Point S.r.l. is an Italian B2B manufacturer of hot runner systems, interchangeable bushings, filter nozzles, heaters, thermocouples, and EFI thermoregulation units for thermoplastic injection moulding, serving mould builders and plastic processors from Settimo Torinese and via UK distribution.
Ownership category
akta.pro rank

Injection Point industry classification

Industry
Product category
Industrial Plastic Injection Moulding Components
NAICS
Industrial Process Furnace and Oven Manufacturing (333994)
SIC
Industrial Process Furnaces & Ovens (3567)
akta.pro industry
PRIMARYIMAHAKAD
Boilers, Furnaces & Process Heating Equipment
SECONDARYIMAHAEAC
Heat Transfer Equipment (Heat Exchangers, Boilers, Condensers)

Keywords

  • Hot runner systems
  • Injection moulding components
  • Thermoplastic bushings
  • Filter nozzles plastics
  • Thermoregulation controllers

Where Injection Point is headquartered

Location

Headquarters

HQ city
Settimo Torinese
HQ country
Italy
HQ region
Europe

Offices1 record

Markets served

Injection Point business model

Business model
GTM type
B2B
Offering type
Hardware or Manufacturing
Cost components
Personnel, Supply Chain, Operations, Technology or R&D, Marketing or Sales

Revenue model

  1. Hot Runner Systems and Bushings Manufacturing: Injection Point manufactures and sells hot runner systems, including IPS single bushings, FLS single bushings, IPM multiple bushings, and FLM multiple bushings for thermoplastic injection moulding. Products are customizable to customer specifications and dimension requirements. All components are totally interchangeable within each product line.
  2. Filter Nozzles: Production and sale of unique filter nozzles designed to eliminate contaminated thermoplastic material. Available in multiple types (300, 1000, 2000, 2010, 4000) with titanium-coated options for filled materials.
  3. EFI Thermoregulation Units (Exclusive Italy): Injection Point is the exclusive dealer for Italy (for sale and assistance) of EFI thermoregulation units, which are compatible with all 240V injection systems. This represents both a product revenue stream and after-sales service revenue.
  4. Heaters and Thermocouples: Resale of 24V and 220V heaters, with or without type J or K thermocouples, and TP100 thermoprobes. Sold as spare parts for own products and per specific customer requests.
  5. Special Application Custom Parts: Custom special parts manufactured on customer specifications, providing optimization and customization services in the injector sector.

Go-to-market motion1 record

Distribution channels3 records

Marketing channels4 records

Injection Point product offering

Product offering

Core offering

Injection Point S.r.l. manufactures hot runner systems and injection moulding components (IPS/FLS single bushings, IPM/FLM multiple bushings, IPF filter nozzles) plus 24V/240V cartridge heaters and type J/K thermocouples for the thermoplastic processing industry, with all components made in Italy at the Settimo Torinese facility. The company builds custom-engineered hot runner manifolds up to 2300mm and serves as the exclusive Italian dealer for EFI thermoregulation units (CM8).

Product overview

Injection Point S.r.l. is an Italian manufacturer specializing in hot runner systems and injection molding components, founded in 2001 and based in Settimo Torinese, Turin. The product portfolio consists of: (1) Hot runner systems (canali caldi) in open flow and valve gate configurations for all thermoplastic materials, from small manifolds up to 2300mm; (2) A comprehensive range of injection bushings including IPS and FLS single bushings, and IPM and FLM multiple bushings with totally interchangeable components across types; (3) Filter nozzles (IPF series) for eliminating contaminated thermoplastic material; (4) Temperature control components including 24V/220V cartridge heaters and J/K type thermocouples; (5) EFI thermoregulation/control units (CM8) as exclusive Italian reseller. The company also offers custom special applications per customer specifications. All products are manufactured in Italy at the headquarters in Settimo Torinese.

Differentiator

Problem solved

Functional benefit

Products and services

  • IPS Single Bushings IPS-type direct-injection single bushings made for thermoplastic injection moulding. All IPS components are totally interchangeable with each other, simplifying spares and maintenance. Target customers are mould builders and injection moulding manufacturers.
  • FLS Single Bushings FLS open-flow single bushings (FLS3, FLS7, FLS10) designed for thermoplastic injection moulding. Components are totally interchangeable, with integrated 240V spiral heater and separate thermocouple for precise temperature control.
  • IPM Multiple Bushings IPM multiple bushings for direct injection with hot runner manifold (camera calda). All components are totally interchangeable and IPM-A variants can be supplied with special multi-tips including edgegates and forward feed, dual-voltage (24V internal / 240V band).
  • FLM Multiple Bushings FLM open-flow multiple bushings (FLM3, FLM7, FLM10) used with custom hot runner manifolds. All FLM components are totally interchangeable; valve gate variants are available with 240V spiral heater and separate front thermocouple.
  • IPF Filter Nozzles IPF filter nozzle family (IPF 300, 1000, 2000, 2010, 4000) designed to eliminate contaminated thermoplastic material and prevent blocked feed holes and physical damage to injection bushings. All filter components are fully interchangeable; titanium coating and hardened internal sleeves are available for glass/fibre-filled and aggressive materials.
  • Hot Runner Systems Custom hot runner injection systems (open flow and valve gate configurations) built to customer-specified dimensions, ranging from small manifolds to 2300mm manifolds and suitable for all thermoplastic materials including filled and aggressive grades.
  • 24V and 220V Heaters 24V and 220V cartridge heaters (with or without type J or K thermocouples, or TP100 thermowells when required), sold as spare parts for Injection Point products and on customer specification.
  • Thermocouples and Thermoprobe Type J and K thermocouples, and TP100 thermoprobes when needed, supplied as spare parts for Injection Point products or per specific customer requests.
  • EFI CM8 Thermoregulation Units (Exclusive Italian Dealership) Injection Point is the exclusive Italian dealer (sale and assistance) for EFI CM8 thermoregulation units. The units are compatible with all 240V injection systems and with both K and J type thermocouples, completing the company's hot runner temperature-control ecosystem.
  • Special Application Custom Parts Custom special parts and components manufactured to customer specifications for injector applications, providing complete optimisation and customisation services in the injector sector.

Companies that use Injection Point

Customer profile

Segments3 records

Ideal customer profiles3 records

Injection Point technology and API

Technology

Technology focussed No

API detail

Has API
No
API docs
API detail

Core technology

AI maturity

App detail

Feature6 records

Injection Point partnerships and signals

Strategic signal

Partnerships

Two partnerships are on record, tiered core.

  • Prima Sales & Services LimitedcoreChannel Partner/ Reseller/ DistributorPrima Sales & Services Limited is located at 87 Forster Road, Beckenham, Kent BR3 4LG, England. They serve as the distribution partner for Injection Point products in the England market, handling sales and potentially service support. Contact: Tel: 0044 0208 658 1613, Email: prima1613@aol.com.
  • EFI LtdcoreTechnology or IntegrationEFI Ltd is located at 46 Melbourne Road, Lowestoft, Suffolk, NR32 1st, England. While primarily a technology partner whose products (thermoregulation units) Injection Point distributes, EFI also appears on the partnership page suggesting mutual technical and commercial collaboration. EFI manufactures thermoregulation controllers compatible with 240V injection systems and type J/K thermocouples. Contact: Tel: 01502 518397, Email: sales@efisystems.co.uk; support@efisystems.co.uk.

Scale indicators3 records

Recent moves5 records

Expansion highlights4 records

Injection Point competitors and assessment

Company assessment

Direct peers

  • INCOE Corporation: US-based hot runner manufacturer specializing in valve gate and hot half systems for injection moulding. Comparable product portfolio (bushings, manifolds, controllers) and serves the same thermoplastic moulding customer base as Injection Point.
  • Ewikon: German specialist in hot runner systems and valve gate technology for injection moulding, with proprietary side-gate and needle-shut-off solutions. Direct competitor for high-cavitation, custom hot runner projects.
  • Mold-Masters: One of the world's largest hot runner system manufacturers, offering complete hot runner, manifold, and temperature control solutions for thermoplastic injection moulding — directly overlapping Injection Point's core product range across all mould sizes and configurations.
  • Synventive (Barnes Group): Global supplier of hot runner systems and temperature controllers for injection moulding, offering both open flow and valve gate technology. Directly competes with Injection Point across European mould builders and OEMs.
  • Günther Heisskanaltechnik: German manufacturer of hot runner systems with a strong reputation for high-cavitation manifolds and valve gate technology. Directly comparable product offering and serves overlapping European mould builder customers.
  • HRS (Hot Runner Systems): German hot runner systems manufacturer offering open flow and valve gate technology with a strong European mould builder customer base. Direct competitor in the European custom hot runner market served by Injection Point.
  • Yudo (Yudo Co., Ltd.): Korean-based global supplier of hot runner systems, manifolds, and temperature controllers with growing European footprint. Direct peer competing in standardized and custom hot runner solutions for injection moulders.
  • PCS Company: US supplier of hot runner components, mould components, and hot half systems for injection moulding. Comparable product portfolio across bushings, heaters, thermocouples, and manifold assemblies.
  • Mastip (Mastip Technology): New Zealand-based hot runner systems manufacturer with a focused product line of valve gate and open flow systems for injection moulding. Comparable mid-sized competitor targeting custom mould projects.
  • THERMOPLAY (INglass Group): Italian-headquartered hot runner systems manufacturer (part of INglass Group) with deep expertise in valve gate and multi-cavity hot runner technology. A direct competitor with home-market Italian presence analogous to Injection Point.

Market position

Strengths4 records

Weaknesses5 records

Competitive moat4 records

Key risks5 records

Key highlights6 records

Customer concentration

Injection Point social profiles

Digital presence

Injection Point financial estimates

Financial estimate

Revenue estimate

Valuation estimate

Injection Point leadership team

Management profile

Number of profiles

Profiles4 records

Injection Point funding detail

Funding detail

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

Injection Point M&A and investment

M&A and investment

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Injection Point

What does Injection Point do?

Injection Point S.r.l. manufactures hot runner systems and injection moulding components (IPS/FLS single bushings, IPM/FLM multiple bushings, IPF filter nozzles) plus 24V/240V cartridge heaters and type J/K thermocouples for the thermoplastic processing industry, with all components made in Italy at the Settimo Torinese facility. The company builds custom-engineered hot runner manifolds up to 2300mm and serves as the exclusive Italian dealer for EFI thermoregulation units (CM8).

Is Injection Point a public or private company?

Injection Point is a private company. It is classified as founder individual operated bootstrapped and is currently operating.

When was Injection Point founded?

Injection Point was founded in 2001. It employs 1 to 10 people.

Where is Injection Point based?

Injection Point is headquartered in Settimo Torinese, Italy, in the Europe region.

How does Injection Point make money?

Five revenue lines are on record. Hot Runner Systems and Bushings Manufacturing is the primary driver. The others are filter Nozzles, EFI Thermoregulation Units (Exclusive Italy), heaters and Thermocouples and special Application Custom Parts.

Who are Injection Point's main competitors?

Direct peers on record are INCOE Corporation, Ewikon, Mold-Masters, Synventive (Barnes Group), Günther Heisskanaltechnik, HRS (Hot Runner Systems), Yudo (Yudo Co., Ltd.), PCS Company, Mastip (Mastip Technology) and THERMOPLAY (INglass Group).

Does Injection Point have an API?

No public API is recorded for Injection Point.

What industry is Injection Point in?

Injection Point's product category is Industrial Plastic Injection Moulding Components. Its primary akta.pro industry code is IMAHAKAD, Boilers, Furnaces & Process Heating Equipment, with a secondary code of IMAHAEAC, Heat Transfer Equipment (Heat Exchangers, Boilers, Condensers). Its NAICS code is 333994 and its SIC code is 3567.

Unlock the full company data

50 free credits on sign-up, no credit card required.

Contact sales