Developer docs
API playgroundTry for free, no card

Search company profiles

R&D Molders

Full company profile

uuid000rwjh

Namestring
R&D Molders
Legal namestring
R&D Molders
Websiteurl
rdmolders.com
Company typeenum
Private
Founded yearint
1974
Descriptiontext

R&D Molders is a custom plastic contract manufacturer founded in 1974 and headquartered in Georgetown, Texas, approximately 20 minutes north of Austin. The company operates from a 60,000 square foot facility with a dedicated 5,000 square foot tool room and 5,000 square foot assembly room, and has been a facility of Lomont Molding LLC since its 2017 acquisition. Its core capabilities are plastic injection molding (clamping force 55 to 300 tons, shot sizes 2 to 32 ounces, up to 16 cavities, tolerance of plus or minus 0.003 inches) and blow molding (up to 7 pound shot sizes, up to 4 cavities), supplemented by structural foam, nitrogen gas-assist, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding processes.

The company runs an engineering and tooling operation in-house, using SOLIDWORKS, KeyCreator Direct, and Mastercam on advanced NT workstations, and provides secondary operations including sonic welding, painting, shielding, hot stamping, part assembly, machining, CMM inspection, clean room molding, leak detection, bar coding, and inventory control. It is ISO 9001:2015 certified across all OEM production outside of proprietary lines, and the customer base spans Medical and Healthcare, Industrial Manufacturing, Consumer Goods, Sporting Goods, Electronics, GSA/DOD, Home and Garden, and Energy verticals.

R&D Molders sells exclusively through direct B2B engagement, with a website-based Request for Quote funnel and phone outreach. Pricing is quote-based on a project-by-project basis, with rush and emergency services available at premium pricing, and both short and long term contract runs welcomed. Standard lead times are approximately 8 weeks. Foreign sourcing for tool and mold building supports international customers on the tooling side, while manufacturing remains domestic. The company has historically emphasized repeat business and customer satisfaction as its primary commercial signal.

Short descriptiontext

R&D Molders is a custom plastic injection and blow molding contract manufacturer based in Georgetown, Texas, serving medical, industrial, consumer goods, electronics, GSA/DOD, and other B2B customers with full-service engineering, tooling, and secondary operations.

Operating statusenum
Operating
Ownership categoryenum
Headcount rangeband
11–50
akta.pro rankint
HeadquartersGeorgetown, United States
HQ citystring
Georgetown
HQ countrystring
United States
HQ regionstring
North America
Markets served

Serves global market

Offices1 record

Each record includes

City, Country, Type, Description, Source

Keyword5 values
custom plastic molding, injection molding services, blow molding services, contract manufacturing, structural foam molding
Industry2 codes
PRIMARYIMANAFAJ
Custom Injection Molding & Contract Manufacturing (Job Shops/CMs)
SECONDARYIMANAGAO
Custom & Contract Blow-Molding Services (Toll Manufacturing)
NAICS code3 codes
  • Plastics Product Manufacturing3261
  • Plastics and Rubber Products Manufacturing326
  • Industrial Mold Manufacturing333511
Product category
Custom Plastic Molding
Social media profiles1 record
GTM motion1 record

Each record includes

Type, Description, Source

Revenue model4 records
1Contract Manufacturing - Injection Molding
TypeOne Time License
Description

Custom injection molding services for small to medium parts, multi-component products, and assembly parts. Revenue generated through per-project contracts with varying volumes from prototype to high volume large scale production runs. Typical lead time of 8 weeks with rush services available.

2Contract Manufacturing - Blow Molding
TypeOne Time License
Description

Custom blow molding services for small, medium, and multi-part products. Accommodates recurring delivery contracts and orders of any size. Includes value-added services like turnkey product development, inspection and testing, moldmaking and tooling.

3Tooling and Mold Making
TypeProfessional Services
Description

In-house tooling development and manufacturing including full mold production, cavity and core manufacturing, and complex mold repair. Includes mold audits for moldability and cost reduction options.

4Secondary Operations
TypeProfessional Services
Description

Value-added services including assembly, sonic welding, insert molding, painting, shielding, hot stamping, part assembly, machining, quality control, CMM inspection, rapid prototyping, clean room molding, leak detection, bar coding, and inventory control.

Marketing channels3 records

Each record includes

Title, Type, Stage, Description, Source

Distribution channels2 records

Each record includes

Title, Type, Scope, Target buyer, Description, Source

Cost components5 values
Personnel, Operations, Supply Chain, Infrastructure, Technology or R&D
Pricing details1 tier
1Custom Quote-Based Pricing
ModelOtherBilling cadenceMulti-year contract
Notes

Projects are quoted on a job-by-job basis. Emergency and rush services available at premium pricing. Contract runs welcome for both short and long term arrangements.

GTM typeB2B
B2B
Offering typeHardware or Manufacturing
Hardware or Manufacturing
Core offering1 text field

R&D Molders is a custom plastic contract manufacturer offering injection molding (55–300 tons, 2–32 oz shot sizes, up to 16 cavities), blow molding (up to 7 lb shot sizes, up to 4 cavities), and a range of specialty molding processes including structural foam, nitrogen gas-assist, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding. The company also provides in-house tooling/mold making, CAD/CAM engineering, and secondary operations such as assembly, sonic welding, painting, hot stamping, and CMM inspection, serving medical, industrial, consumer goods, sporting goods, electronics, GSA/DOD, home & garden, and energy industries from its 60,000 sq ft Georgetown, Texas facility.

Differentiator
Functional benefit
Problem solved
Quantifiable outcome1 of 3 values shown
  • Tolerance of ±0.003 inches achievable
+2 more records
Product overview1 text field

R&D Molders is a custom plastic molder offering a unified portfolio of manufacturing services centered on injection molding and blow molding as core capabilities. Their injection molding services (55-300 tons, 2-32 oz shot size, up to 16 cavities) and blow molding services (up to 4 cavities, 7 lb shot size) are complemented by specialized processes including structural foam molding, nitrogen gas-assist molding, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding. Value-added services include assembly and secondary operations (sonic welding, painting, hot stamping), engineering services (using SOLIDWORKS, KeyCreator Direct, Mastercam), and in-house tooling capabilities. The company serves medical, industrial, consumer goods, sporting goods, electronics, GSA/DOD, home & garden, and energy industries from their Georgetown, Texas facility.

Product and service3 records
1Injection Molding Services
CategoryCore Molding
Description

High-pressure plastic injection molding services with 40+ years of experience, capable of 55 to 300 tons of clamping force (with some equipment up to 2700 tons), handling shot sizes from 2 oz to 32 oz, achieving tolerances of ±0.003 inches, and supporting 1 to 16 cavities. Used by OEMs across medical, industrial, consumer, electronics, and defense industries.

2Blow Molding Services
CategoryCore Molding
Description

Automated blow molding services using shuttle style blow molders with continuous, accumulating head, and reciprocating screw configurations for small, medium, and multi-part products. Shot sizes up to 7 pounds, supporting up to 4 cavities with ERP monitoring for quality. Produces hollow plastic products from bottles to drums using a wide range of thermoplastic materials.

3Specialty Molding Services
Scale indicator5 records

Each record includes

Type, Value, Description, Source

Partnership1 partner
Strategic tierCoreTypeStrategic or Co-development PartnerAnnounced on2017-01-01
Description

In 2017, R&D Molders was acquired by Lomont Molding out of Mount Pleasant, Iowa. R&D Molders continues to operate as a Lomont Molding facility, maintaining its Georgetown, Texas operations while benefiting from the parent company's resources, engineering services, quality assurance, and market reach.

Recent move6 records

Each record includes

Date, Type, Title, Description, Source

Expansion highlight4 records

Each record includes

Type, Description

Market position
Competitive moat5 records

Each record includes

Type, Details

Key risks6 records

Each record includes

Headline, Details, Source

Key highlights6 records

Each record includes

Headline, Details, Source

Customer concentration

Classification, Details

Segment8 records

Each record includes

Title, Type, Primary, Description, Pain point addressed, Use case, Source

Ideal customer profile4 records

Each record includes

Profile, Firmographic size, Sales motion, Sales cycle length, Buying structure, Purchase trigger, Buyer persona, Geography, Industry vertical, Primary use case, Description, Pain points, Evidence proof points, Target buyer

Technology focused
No
API detail
Has APIbool
No

Docs URL, Description

AI maturity
App detail

Has app

Feature10 records

Each record includes

Title, Differentiator, Description, Source

Core technology
Revenue estimate
Valuation estimate
Number of profiles
No data
Compliance1 record

Each record includes

Name, Class, Description

Funding overview

Funding stage, Last funding date, Total funding USD

Funding rounds

Each record includes

Round, Amount USD, Date, Pre money valuation, Total investors, Investors, News

Investors

Each record includes

Name, Type, Date of entry, Rounds participated, Website

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Each record includes

Name, Acquisition type, Announced date, Completed date, Status, Website, News

Investment

Each record includes

Name, Round, Announced date, Lead investor, Website, News

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

R&D Molders

Custom Plastic Moldingrdmolders.com

R&D Molders is a custom plastic injection and blow molding contract manufacturer based in Georgetown, Texas, serving medical, industrial, consumer goods, electronics, GSA/DOD, and other B2B customers with full-service engineering, tooling, and secondary operations.

What R&D Molders does

R&D Molders is a custom plastic contract manufacturer founded in 1974 and headquartered in Georgetown, Texas, approximately 20 minutes north of Austin. The company operates from a 60,000 square foot facility with a dedicated 5,000 square foot tool room and 5,000 square foot assembly room, and has been a facility of Lomont Molding LLC since its 2017 acquisition. Its core capabilities are plastic injection molding (clamping force 55 to 300 tons, shot sizes 2 to 32 ounces, up to 16 cavities, tolerance of plus or minus 0.003 inches) and blow molding (up to 7 pound shot sizes, up to 4 cavities), supplemented by structural foam, nitrogen gas-assist, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding processes.

The company runs an engineering and tooling operation in-house, using SOLIDWORKS, KeyCreator Direct, and Mastercam on advanced NT workstations, and provides secondary operations including sonic welding, painting, shielding, hot stamping, part assembly, machining, CMM inspection, clean room molding, leak detection, bar coding, and inventory control. It is ISO 9001:2015 certified across all OEM production outside of proprietary lines, and the customer base spans Medical and Healthcare, Industrial Manufacturing, Consumer Goods, Sporting Goods, Electronics, GSA/DOD, Home and Garden, and Energy verticals.

R&D Molders sells exclusively through direct B2B engagement, with a website-based Request for Quote funnel and phone outreach. Pricing is quote-based on a project-by-project basis, with rush and emergency services available at premium pricing, and both short and long term contract runs welcomed. Standard lead times are approximately 8 weeks. Foreign sourcing for tool and mold building supports international customers on the tooling side, while manufacturing remains domestic. The company has historically emphasized repeat business and customer satisfaction as its primary commercial signal.

R&D Molders firmographics

Firmographics
Name
R&D Molders
Legal name
R&D Molders
Website
https://rdmolders.com
Company type
Private
Founded year
1974
Operating status
Operating
Headcount range
11–50 employees
Short description
R&D Molders is a custom plastic injection and blow molding contract manufacturer based in Georgetown, Texas, serving medical, industrial, consumer goods, electronics, GSA/DOD, and other B2B customers with full-service engineering, tooling, and secondary operations.
Ownership category
akta.pro rank

R&D Molders industry classification

Industry
Product category
Custom Plastic Molding
NAICS
Plastics Product Manufacturing (3261), Plastics and Rubber Products Manufacturing (326), Industrial Mold Manufacturing (333511)
akta.pro industry
PRIMARYIMANAFAJ
Custom Injection Molding & Contract Manufacturing (Job Shops/CMs)
SECONDARYIMANAGAO
Custom & Contract Blow-Molding Services (Toll Manufacturing)

Keywords

  • Custom plastic molding
  • Injection molding services
  • Blow molding services
  • Contract manufacturing
  • Structural foam molding

Where R&D Molders is headquartered

Location

Headquarters

HQ city
Georgetown
HQ country
United States
HQ region
North America

Offices1 record

Markets served

R&D Molders business model

Business model
GTM type
B2B
Offering type
Hardware or Manufacturing
Cost components
Personnel, Operations, Supply Chain, Infrastructure, Technology or R&D

Revenue model

  1. Contract Manufacturing - Injection Molding: Custom injection molding services for small to medium parts, multi-component products, and assembly parts. Revenue generated through per-project contracts with varying volumes from prototype to high volume large scale production runs. Typical lead time of 8 weeks with rush services available.
  2. Contract Manufacturing - Blow Molding: Custom blow molding services for small, medium, and multi-part products. Accommodates recurring delivery contracts and orders of any size. Includes value-added services like turnkey product development, inspection and testing, moldmaking and tooling.
  3. Tooling and Mold Making: In-house tooling development and manufacturing including full mold production, cavity and core manufacturing, and complex mold repair. Includes mold audits for moldability and cost reduction options.
  4. Secondary Operations: Value-added services including assembly, sonic welding, insert molding, painting, shielding, hot stamping, part assembly, machining, quality control, CMM inspection, rapid prototyping, clean room molding, leak detection, bar coding, and inventory control.

Pricing tiers

ModelBillingPrice
OtherMulti-year contractCustom Quote-Based Pricing

Go-to-market motion1 record

Distribution channels2 records

Marketing channels3 records

R&D Molders product offering

Product offering

Core offering

R&D Molders is a custom plastic contract manufacturer offering injection molding (55–300 tons, 2–32 oz shot sizes, up to 16 cavities), blow molding (up to 7 lb shot sizes, up to 4 cavities), and a range of specialty molding processes including structural foam, nitrogen gas-assist, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding. The company also provides in-house tooling/mold making, CAD/CAM engineering, and secondary operations such as assembly, sonic welding, painting, hot stamping, and CMM inspection, serving medical, industrial, consumer goods, sporting goods, electronics, GSA/DOD, home & garden, and energy industries from its 60,000 sq ft Georgetown, Texas facility.

Product overview

R&D Molders is a custom plastic molder offering a unified portfolio of manufacturing services centered on injection molding and blow molding as core capabilities. Their injection molding services (55-300 tons, 2-32 oz shot size, up to 16 cavities) and blow molding services (up to 4 cavities, 7 lb shot size) are complemented by specialized processes including structural foam molding, nitrogen gas-assist molding, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding. Value-added services include assembly and secondary operations (sonic welding, painting, hot stamping), engineering services (using SOLIDWORKS, KeyCreator Direct, Mastercam), and in-house tooling capabilities. The company serves medical, industrial, consumer goods, sporting goods, electronics, GSA/DOD, home & garden, and energy industries from their Georgetown, Texas facility.

Differentiator

Problem solved

Functional benefit

Products and services

  • Injection Molding Services High-pressure plastic injection molding services with 40+ years of experience, capable of 55 to 300 tons of clamping force (with some equipment up to 2700 tons), handling shot sizes from 2 oz to 32 oz, achieving tolerances of ±0.003 inches, and supporting 1 to 16 cavities. Used by OEMs across medical, industrial, consumer, electronics, and defense industries.
  • Blow Molding Services Automated blow molding services using shuttle style blow molders with continuous, accumulating head, and reciprocating screw configurations for small, medium, and multi-part products. Shot sizes up to 7 pounds, supporting up to 4 cavities with ERP monitoring for quality. Produces hollow plastic products from bottles to drums using a wide range of thermoplastic materials.
  • Specialty Molding Services

Quantifiable outcome

  • Tolerance of ±0.003 inches achievable
  • +2 more outcomes

Companies that use R&D Molders

Customer profile

Segments8 records

Ideal customer profiles4 records

R&D Molders technology and API

Technology

Technology focussed No

API detail

Has API
No
API docs
API detail

Core technology

AI maturity

App detail

Feature10 records

R&D Molders partnerships and signals

Strategic signal

Partnerships

One partnership is on record.

  • Lomont MoldingcoreStrategic or Co-development Partner · 1 January 2017In 2017, R&D Molders was acquired by Lomont Molding out of Mount Pleasant, Iowa. R&D Molders continues to operate as a Lomont Molding facility, maintaining its Georgetown, Texas operations while benefiting from the parent company's resources, engineering services, quality assurance, and market reach.

Scale indicators5 records

Recent moves6 records

Expansion highlights4 records

R&D Molders competitors and assessment

Company assessment

Market position

Competitive moat5 records

Key risks6 records

Key highlights6 records

Customer concentration

R&D Molders social profiles

Digital presence

R&D Molders compliance and trust

Trust signal

Compliance1 record

R&D Molders financial estimates

Financial estimate

Revenue estimate

Valuation estimate

R&D Molders leadership team

Management profile

Number of profiles

R&D Molders funding detail

Funding detail

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

R&D Molders M&A and investment

M&A and investment

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about R&D Molders

What does R&D Molders do?

R&D Molders is a custom plastic contract manufacturer offering injection molding (55–300 tons, 2–32 oz shot sizes, up to 16 cavities), blow molding (up to 7 lb shot sizes, up to 4 cavities), and a range of specialty molding processes including structural foam, nitrogen gas-assist, over-molding, in-mold decorating, profile extrusion, injection blow molding, and insert injection molding. The company also provides in-house tooling/mold making, CAD/CAM engineering, and secondary operations such as assembly, sonic welding, painting, hot stamping, and CMM inspection, serving medical, industrial, consumer goods, sporting goods, electronics, GSA/DOD, home & garden, and energy industries from its 60,000 sq ft Georgetown, Texas facility.

Is R&D Molders a public or private company?

R&D Molders is a private company. It is classified as corporate owned and is currently operating.

When was R&D Molders founded?

R&D Molders was founded in 1974. It employs 11 to 50 people.

Where is R&D Molders based?

R&D Molders is headquartered in Georgetown, United States, in the North America region.

How does R&D Molders make money?

Four revenue lines are on record. Contract Manufacturing - Injection Molding is the primary driver. The others are contract Manufacturing - Blow Molding, tooling and Mold Making and secondary Operations.

Does R&D Molders have an API?

No public API is recorded for R&D Molders.

What industry is R&D Molders in?

R&D Molders's product category is Custom Plastic Molding. Its primary akta.pro industry code is IMANAFAJ, Custom Injection Molding & Contract Manufacturing (Job Shops/CMs), with a secondary code of IMANAGAO, Custom & Contract Blow-Molding Services (Toll Manufacturing). Its NAICS code is 3261.

Unlock the full company data

50 free credits on sign-up, no credit card required.

Contact sales