Developer docs
API playgroundTry for free, no card

Search company profiles

ELECTRONIC & MECHANICAL

Full company profile

uuid000t3vr

Namestring
ELECTRONIC & MECHANICAL
Legal namestring
Electronic & Mechanical Calibration Service
Company typeenum
Private
Founded yearstring
-
Descriptiontext

Electronic & Mechanical Calibration Service (EM-Calibrations, E&M Cal) is an ISO/IEC 17025 accredited calibration services firm headquartered at 9 Main Street, Suite 3A, Sutton, Massachusetts, operating as a division/DBA under Allied Valve Inc. The company delivers on-site calibration, repair, and oven/furnace temperature uniformity survey services across temperature, pressure, dimensional, electrical, and vacuum instrumentation, with a NADCAP-approved Yokogawa DAQStation data acquisition system recording at two-minute intervals and a fully equipped mobile calibration lab enabling work at customer facilities across New England and the Eastern United States. Compliance posture spans ISO/IEC 17025 (ANAB, since 1996), ANSI/NCSL Z540-1 (since 2017), NADCAP approval, ILAC-MRA recognition, and adherence to AMS2750, BAC5621, MIL-H-6875, ISO 9000/QS-9000/AS-9100, and FDA/cGMP requirements, with standards traceable to NIST at a 4:1 test accuracy ratio.

The company generates revenue primarily through professional services fees for on-site calibration visits, including 24-hour emergency service and calibrations scheduled during customer shutdowns, supplemented by distribution of Yokogawa data acquisition units and Marlin Manufacturing thermocouples and by electrical/automation system design and installation delivered via an on-staff Master Licensed Electrician with 30+ years of experience. Go-to-market relies on direct phone-based sales, an online customer portal, and OEM referral channels through Yokogawa, Scott Safety (where EM-Calibrations is the New England Service Center for gas/vapor detection systems), and Marlin Manufacturing. The customer base spans aerospace, automotive, biotech/medical/pharmaceutical, manufacturing/heat treating, chemical, electronics, and nuclear verticals, served by a team that includes a General Manager (Paul O'Malley), a Quality Control Manager, a Senior Calibration Technician, four additional technicians, and two administrative staff.

Short descriptiontext

EM-Calibrations is an ISO/IEC 17025 accredited, NADCAP-approved calibration services firm in Sutton, Massachusetts, delivering on-site temperature, pressure, dimensional, electrical, and vacuum calibration plus furnace uniformity surveys to aerospace, automotive, biotech, and manufacturing clients across New England and the Eastern United States.

Operating statusenum
Operating
Ownership categoryenum
Headcount rangeband
11–50
akta.pro rankint
HeadquartersSutton, United States
HQ citystring
Sutton
HQ countrystring
United States
HQ regionstring
North America
Markets served

Serves global market

Offices1 record

Each record includes

City, Country, Type, Description, Source

Keyword5 values
instrumentation calibration services, on-site calibration, temperature uniformity surveys, electrical automation services, industrial metrology services
Industry1 code
PRIMARYIMAGAFAH
Calibration Services & Standards (Calibration labs, reference standards, traceability services)
Industrials, Manufacturing & Construction/Electrical Equipment & Industrial Electronics/Sensors, Instrumentation & Measurement (Industrial sensing, metrology, test)
NAICS code1 code
  • Testing Laboratories and Services54138
SIC code1 code
  • Services-Testing Laboratories8734
Product category
Industrial Calibration Services
Social media profiles1 record
GTM motion2 records

Each record includes

Type, Description, Source

Revenue model4 records
1On-Site Calibration Services
TypeProfessional Services
Description

Professional calibration and repair services delivered at customer facilities. Services include temperature, pressure, dimensional, electrical, and vacuum instrumentation calibration. Revenue generated through service fees for on-site calibration visits, with value-added services including calibrations during shutdowns and 24-hour emergency service.

em-calibrations.com
2Oven/Furnace Uniformity Surveys
TypeProfessional Services
Description

Temperature uniformity surveys and profiles conducted to AMS2750 specifications for aerospace, automotive, and manufacturing industries. Includes certification documentation and detailed reporting using Yokogawa DAQStation equipment.

em-calibrations.com
3Electrical/Automation System Services
TypeProfessional Services
Description

Master Licensed Electrician providing new feeder circuits, control systems design and retrofit, fire alarm installation, and system commissioning. These services complement calibration offerings and provide additional revenue through electrical system services.

em-calibrations.com
4Equipment Distribution (Yokogawa, Marlin)
TypeHardware Sales
Description

As authorized distributor for Yokogawa products (data acquisition units, industrial recorders, controllers) and Marlin Manufacturing thermocouples, generating revenue through product sales alongside calibration services.

em-calibrations.com
Marketing channels4 records

Each record includes

Title, Type, Stage, Description, Source

Distribution channels4 records

Each record includes

Title, Type, Scope, Target buyer, Description, Source

Cost components5 values
Personnel, Operations, Technology or R&D, Supply Chain, Marketing or Sales
GTM typeB2B
B2B
Offering typeServices
Services
Core offering1 text field

EM-Calibrations provides on-site calibration services and repair for temperature, pressure, dimensional, electrical, and vacuum instrumentation at customer facilities across New England and the Eastern United States. The company also conducts NADCAP-approved oven/furnace temperature uniformity surveys using Yokogawa DAQStation data acquisition equipment, and offers electrical and automation system design, installation, and retrofit services staffed by a Master Licensed Electrician.

Differentiator
Functional benefit
Problem solved
Quantifiable outcome1 of 4 values shown
  • Eliminate equipment downtime through on-site calibration services
+3 more records
Product overview1 text field

Electronic & Mechanical is a calibration services company offering on-site and laboratory calibration services across multiple measurement domains. The core offerings include on-site calibration service and repair, oven/furnace uniformity surveys (using Yokogawa DAQStation equipment), and electrical/automation system services. Specialty calibration services cover temperature/environmental, pressure/vacuum, dimensional, and biotech/medical equipment. The company also distributes Yokogawa products (data acquisition units, industrial recorders, controllers) and serves as an authorized service center for Scott Safety gas/vapor detection systems and Marlin Manufacturing thermocouples.

Product and service10 records
1On-Site Calibration Service & Repair
CategoryCalibration Services
Description

On-site calibration services and repair for temperature instrumentation, pressure gauges, humidity meters, vacuum measuring systems, dial indicators, torque wrenches, multimeters, and process controls delivered at customer facilities.

2Oven/Furnace Uniformity Surveys
CategoryCalibration Services
Description

Temperature uniformity surveys and profiles for furnaces and ovens, including integral quench/carburizing, vacuum, batch, and tempering furnaces, conducted using NADCAP-approved Yokogawa DAQStation equipment per AMS2750 specifications.

3Electrical/Automation System Services
CategoryElectrical & Automation Services
Description

Design, installation, retrofit, and maintenance of electrical systems and automation controls, including new feeder circuits, fire alarm systems, tele/data wiring, and automated control systems, performed by an on-staff Master Licensed Electrician.

4Temperature/Environmental Calibration
CategorySpecialty Calibration
Description

Calibration services for temperature and environmental measurement devices including autoclaves, environmental chambers, freezers, humidity meters, ovens, RTDs, thermocouples, and room temperature mapping.

5Pressure/Vacuum Calibration
CategorySpecialty Calibration
Description

Calibration for pressure and vacuum measurement equipment including flow gages/meters, force transducers, pressure gages, pressure masters, pressure transducers, and vacuum gages.

6Dimensional Calibration
CategorySpecialty Calibration
Description

Calibration for dimensional measurement tools including bench micrometers, calipers, depth micrometers, height gages, micrometers, sine bars, and scales.

7Biotech/Medical Calibration
CategorySpecialty Calibration
Description

Calibration services for biotech and medical industry equipment including autoclaves, centrifuges, environmental chambers, freezers/refrigerators, incubators, pH meters, and temperature mapping/profiling systems.

8Yokogawa Products Distribution
CategoryEquipment Distribution
Description

Authorized distribution of Yokogawa products including data acquisition units (Darwin, DAQMaster), industrial recorders (DAQSTATION), and controllers (Green Series, UT100 Series).

9Scott Safety Gas/Vapor Detection Systems Service
CategoryService Partnership
Description

New England Service Center for Scott Safety gas/vapor detection systems providing calibration, design, installation, and retrofit services with 1-2 day turnaround.

10Marlin Manufacturing Thermocouples Distribution
CategoryEquipment Distribution
Description

Authorized distribution of Marlin Manufacturing thermocouples.

Scale indicator2 records

Each record includes

Type, Value, Description, Source

Partnership5 partners
Strategic tierCoreTypeChannel Partner/ Reseller/ Distributor
Description

EM-Calibrations is an authorized sales representative for Yokogawa products including data acquisition units (Darwin, DAQMASTER), industrial recorders (DAQSTATION), and controllers (Green Series, UT100 Series). Yokogawa is a world leader in industrial automation and control with industry expertise dating back to 1915. EM Cal uses Yokogawa DAQStation equipment with 2-minute recording intervals for NADCAP-approved temperature uniformity surveys.

Strategic tierCoreTypeChannel Partner/ Reseller/ Distributor
Description

EM-Calibrations is the New England Service Center for Scott Safety Gas/Vapor Detection Systems, offering calibration, design, installation, and retrofit services for Scott Safety detection equipment. Normal turnaround is 1-2 days with express shipping available. Scott Safety specializes in gas and vapor detection technology for safety applications.

Strategic tierMinorTypeChannel Partner/ Reseller/ Distributor
Description

EM-Calibrations is an authorized distributor for Marlin Manufacturing Thermocouples, providing customers with thermocouple products alongside calibration services.

Strategic tierCoreTypeOthers
Description

EM-Calibrations is accredited to ISO/IEC 17025 and Z540-1 by ANAB, achieved in 1996 and maintained through all follow-up audits. ANAB provides third-party accreditation recognition for calibration laboratories.

Strategic tierMinorTypeOthers
Description

Avetta provides contractor safety management and verification services. EM-Calibrations is listed as Avetta-compliant, indicating the company meets safety and compliance standards required by enterprise customers.

Recent move6 records

Each record includes

Date, Type, Title, Description, Source

Expansion highlight5 records

Each record includes

Type, Description

Peers8 records
1Trescal
TypeDirect peer
Description

Trescal is a global, CDPQ-backed calibration and metrology services provider with broad ISO 17025 coverage across temperature, pressure, electrical, dimensional, and flow disciplines. It is the most direct large-scale competitor to EM-Calibrations in on-site industrial calibration.

2Transcat
TypeDirect peer
Description

Transcat (NASDAQ: TRNS) is a US-based, publicly listed provider of accredited calibration services and distributed test/measurement instruments. It competes head-to-head with EM-Calibrations across temperature, pressure, electrical, and dimensional cal and also distributes calibration hardware.

TypeBroad incumbent
Description

Beamex is a Finland-headquartered manufacturer of high-accuracy industrial calibration equipment plus calibration software/services. It overlaps EM-Calibrations on temperature/pressure/electrical calibration methodology and on the test/measurement distribution channel via partners like Yokogawa-adjacent ecosystems.

TypeBroad incumbent
Description

Fluke Calibration, a Fortive division, is a leading global manufacturer of calibration instrumentation (pressure, temperature, electrical) and offers accredited calibration services. It is broadly comparable as a category-defining incumbent whose hardware and standards EM-Calibrations implicitly aligns with.

5Davis Calibration
TypeDirect peer
Description

Davis Calibration is a US regional ISO 17025-accredited calibration lab serving aerospace, medical, and industrial accounts with on-site capability. It is a directly comparable mid-sized regional competitor to EM-Calibrations in temperature, pressure, dimensional, and electronic calibration.

TypeDirect peer
Description

Clark Testing is a US accredited testing and calibration provider offering environmental, mechanical, electrical, and calibration services to aerospace, defense, and industrial customers. Its multi-vertical accredited lab model closely parallels EM-Calibrations' service mix.

TypeDirect peer
Description

Control-Tek operates an ISO 17025-accredited calibration lab in Pennsylvania serving aerospace, pharmaceutical, and manufacturing clients with on-site temperature, pressure, dimensional, and electronic cal. It is a closely comparable regional peer with an analogous mobile/service model.

TypeEmerging player
Description

Morehouse Instrument is a US specialist in force and pressure calibration equipment and services. It is thematically comparable as a niche, accreditation-driven cal provider—though narrower in scope than EM-Calibrations, which spans temperature, dimensional, and electrical as well.

Market position
Strengths5 records

Each record includes

Headline, Details, Source

Weaknesses5 records

Each record includes

Headline, Details, Source

Competitive moat5 records

Each record includes

Type, Details

Key risks6 records

Each record includes

Headline, Details, Source

Key highlights7 records

Each record includes

Headline, Details, Source

Customer concentration

Classification, Details

Segment5 records

Each record includes

Title, Type, Primary, Description, Pain point addressed, Use case, Source

Ideal customer profile5 records

Each record includes

Profile, Firmographic size, Sales motion, Sales cycle length, Buying structure, Purchase trigger, Buyer persona, Geography, Industry vertical, Primary use case, Description, Pain points, Evidence proof points, Target buyer

Technology focused
No
API detail
Has APIbool
No

Docs URL, Description

AI maturity
App detail

Has app

Feature3 records

Each record includes

Title, Differentiator, Description, Source

Core technology
Revenue estimate
Valuation estimate
Number of profiles
Profiles9 records

Each record includes

Name, Designation, Designation category, Overview, Profile commentary, Source

No data
Compliance8 records

Each record includes

Name, Class, Description

Funding overview

Funding stage, Last funding date, Total funding USD

Funding rounds

Each record includes

Round, Amount USD, Date, Pre money valuation, Total investors, Investors, News

Investors

Each record includes

Name, Type, Date of entry, Rounds participated, Website

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Each record includes

Name, Acquisition type, Announced date, Completed date, Status, Website, News

Investment

Each record includes

Name, Round, Announced date, Lead investor, Website, News

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

ELECTRONIC & MECHANICAL

Industrial Calibration Servicesem-calibrations.com

EM-Calibrations is an ISO/IEC 17025 accredited, NADCAP-approved calibration services firm in Sutton, Massachusetts, delivering on-site temperature, pressure, dimensional, electrical, and vacuum calibration plus furnace uniformity surveys to aerospace, automotive, biotech, and manufacturing clients across New England and the Eastern United States.

What ELECTRONIC & MECHANICAL does

Electronic & Mechanical Calibration Service (EM-Calibrations, E&M Cal) is an ISO/IEC 17025 accredited calibration services firm headquartered at 9 Main Street, Suite 3A, Sutton, Massachusetts, operating as a division/DBA under Allied Valve Inc. The company delivers on-site calibration, repair, and oven/furnace temperature uniformity survey services across temperature, pressure, dimensional, electrical, and vacuum instrumentation, with a NADCAP-approved Yokogawa DAQStation data acquisition system recording at two-minute intervals and a fully equipped mobile calibration lab enabling work at customer facilities across New England and the Eastern United States. Compliance posture spans ISO/IEC 17025 (ANAB, since 1996), ANSI/NCSL Z540-1 (since 2017), NADCAP approval, ILAC-MRA recognition, and adherence to AMS2750, BAC5621, MIL-H-6875, ISO 9000/QS-9000/AS-9100, and FDA/cGMP requirements, with standards traceable to NIST at a 4:1 test accuracy ratio.

The company generates revenue primarily through professional services fees for on-site calibration visits, including 24-hour emergency service and calibrations scheduled during customer shutdowns, supplemented by distribution of Yokogawa data acquisition units and Marlin Manufacturing thermocouples and by electrical/automation system design and installation delivered via an on-staff Master Licensed Electrician with 30+ years of experience. Go-to-market relies on direct phone-based sales, an online customer portal, and OEM referral channels through Yokogawa, Scott Safety (where EM-Calibrations is the New England Service Center for gas/vapor detection systems), and Marlin Manufacturing. The customer base spans aerospace, automotive, biotech/medical/pharmaceutical, manufacturing/heat treating, chemical, electronics, and nuclear verticals, served by a team that includes a General Manager (Paul O'Malley), a Quality Control Manager, a Senior Calibration Technician, four additional technicians, and two administrative staff.

ELECTRONIC & MECHANICAL firmographics

Firmographics
Name
ELECTRONIC & MECHANICAL
Legal name
Electronic & Mechanical Calibration Service
Website
https://em-calibrations.com
Company type
Private
Operating status
Operating
Headcount range
11–50 employees
Short description
EM-Calibrations is an ISO/IEC 17025 accredited, NADCAP-approved calibration services firm in Sutton, Massachusetts, delivering on-site temperature, pressure, dimensional, electrical, and vacuum calibration plus furnace uniformity surveys to aerospace, automotive, biotech, and manufacturing clients across New England and the Eastern United States.
Ownership category
akta.pro rank

ELECTRONIC & MECHANICAL industry classification

Industry
Product category
Industrial Calibration Services
NAICS
Testing Laboratories and Services (54138)
SIC
Services-Testing Laboratories (8734)
akta.pro industry
PRIMARYIMAGAFAH
Calibration Services & Standards (Calibration labs, reference standards, traceability services)
Industrials, Manufacturing & Construction/Electrical Equipment & Industrial Electronics/Sensors, Instrumentation & Measurement (Industrial sensing, metrology, test)

Keywords

  • Instrumentation calibration services
  • On-site calibration
  • Temperature uniformity surveys
  • Electrical automation services
  • Industrial metrology services

Where ELECTRONIC & MECHANICAL is headquartered

Location

Headquarters

HQ city
Sutton
HQ country
United States
HQ region
North America

Offices1 record

Markets served

ELECTRONIC & MECHANICAL business model

Business model
GTM type
B2B
Offering type
Services
Cost components
Personnel, Operations, Technology or R&D, Supply Chain, Marketing or Sales

Revenue model

  1. On-Site Calibration Services: Professional calibration and repair services delivered at customer facilities. Services include temperature, pressure, dimensional, electrical, and vacuum instrumentation calibration. Revenue generated through service fees for on-site calibration visits, with value-added services including calibrations during shutdowns and 24-hour emergency service.
  2. Oven/Furnace Uniformity Surveys: Temperature uniformity surveys and profiles conducted to AMS2750 specifications for aerospace, automotive, and manufacturing industries. Includes certification documentation and detailed reporting using Yokogawa DAQStation equipment.
  3. Electrical/Automation System Services: Master Licensed Electrician providing new feeder circuits, control systems design and retrofit, fire alarm installation, and system commissioning. These services complement calibration offerings and provide additional revenue through electrical system services.
  4. Equipment Distribution (Yokogawa, Marlin): As authorized distributor for Yokogawa products (data acquisition units, industrial recorders, controllers) and Marlin Manufacturing thermocouples, generating revenue through product sales alongside calibration services.

Go-to-market motion2 records

Distribution channels4 records

Marketing channels4 records

ELECTRONIC & MECHANICAL product offering

Product offering

Core offering

EM-Calibrations provides on-site calibration services and repair for temperature, pressure, dimensional, electrical, and vacuum instrumentation at customer facilities across New England and the Eastern United States. The company also conducts NADCAP-approved oven/furnace temperature uniformity surveys using Yokogawa DAQStation data acquisition equipment, and offers electrical and automation system design, installation, and retrofit services staffed by a Master Licensed Electrician.

Product overview

Electronic & Mechanical is a calibration services company offering on-site and laboratory calibration services across multiple measurement domains. The core offerings include on-site calibration service and repair, oven/furnace uniformity surveys (using Yokogawa DAQStation equipment), and electrical/automation system services. Specialty calibration services cover temperature/environmental, pressure/vacuum, dimensional, and biotech/medical equipment. The company also distributes Yokogawa products (data acquisition units, industrial recorders, controllers) and serves as an authorized service center for Scott Safety gas/vapor detection systems and Marlin Manufacturing thermocouples.

Differentiator

Problem solved

Functional benefit

Products and services

  • On-Site Calibration Service & Repair On-site calibration services and repair for temperature instrumentation, pressure gauges, humidity meters, vacuum measuring systems, dial indicators, torque wrenches, multimeters, and process controls delivered at customer facilities.
  • Oven/Furnace Uniformity Surveys Temperature uniformity surveys and profiles for furnaces and ovens, including integral quench/carburizing, vacuum, batch, and tempering furnaces, conducted using NADCAP-approved Yokogawa DAQStation equipment per AMS2750 specifications.
  • Electrical/Automation System Services Design, installation, retrofit, and maintenance of electrical systems and automation controls, including new feeder circuits, fire alarm systems, tele/data wiring, and automated control systems, performed by an on-staff Master Licensed Electrician.
  • Temperature/Environmental Calibration Calibration services for temperature and environmental measurement devices including autoclaves, environmental chambers, freezers, humidity meters, ovens, RTDs, thermocouples, and room temperature mapping.
  • Pressure/Vacuum Calibration Calibration for pressure and vacuum measurement equipment including flow gages/meters, force transducers, pressure gages, pressure masters, pressure transducers, and vacuum gages.
  • Dimensional Calibration Calibration for dimensional measurement tools including bench micrometers, calipers, depth micrometers, height gages, micrometers, sine bars, and scales.
  • Biotech/Medical Calibration Calibration services for biotech and medical industry equipment including autoclaves, centrifuges, environmental chambers, freezers/refrigerators, incubators, pH meters, and temperature mapping/profiling systems.
  • Yokogawa Products Distribution Authorized distribution of Yokogawa products including data acquisition units (Darwin, DAQMaster), industrial recorders (DAQSTATION), and controllers (Green Series, UT100 Series).
  • Scott Safety Gas/Vapor Detection Systems Service New England Service Center for Scott Safety gas/vapor detection systems providing calibration, design, installation, and retrofit services with 1-2 day turnaround.
  • Marlin Manufacturing Thermocouples Distribution Authorized distribution of Marlin Manufacturing thermocouples.

Quantifiable outcome

  • Eliminate equipment downtime through on-site calibration services
  • +3 more outcomes

Companies that use ELECTRONIC & MECHANICAL

Customer profile

Segments5 records

Ideal customer profiles5 records

ELECTRONIC & MECHANICAL technology and API

Technology

Technology focussed No

API detail

Has API
No
API docs
API detail

Core technology

AI maturity

App detail

Feature3 records

ELECTRONIC & MECHANICAL partnerships and signals

Strategic signal

Partnerships

Five partnerships are on record, tiered core and minor.

  • YokogawacoreChannel Partner/ Reseller/ DistributorEM-Calibrations is an authorized sales representative for Yokogawa products including data acquisition units (Darwin, DAQMASTER), industrial recorders (DAQSTATION), and controllers (Green Series, UT100 Series). Yokogawa is a world leader in industrial automation and control with industry expertise dating back to 1915. EM Cal uses Yokogawa DAQStation equipment with 2-minute recording intervals for NADCAP-approved temperature uniformity surveys.
  • Scott SafetycoreChannel Partner/ Reseller/ DistributorEM-Calibrations is the New England Service Center for Scott Safety Gas/Vapor Detection Systems, offering calibration, design, installation, and retrofit services for Scott Safety detection equipment. Normal turnaround is 1-2 days with express shipping available. Scott Safety specializes in gas and vapor detection technology for safety applications.
  • Marlin ManufacturingminorChannel Partner/ Reseller/ DistributorEM-Calibrations is an authorized distributor for Marlin Manufacturing Thermocouples, providing customers with thermocouple products alongside calibration services.
  • ANAB (American National Accreditation Board)coreOthersEM-Calibrations is accredited to ISO/IEC 17025 and Z540-1 by ANAB, achieved in 1996 and maintained through all follow-up audits. ANAB provides third-party accreditation recognition for calibration laboratories.
  • AvettaminorOthersAvetta provides contractor safety management and verification services. EM-Calibrations is listed as Avetta-compliant, indicating the company meets safety and compliance standards required by enterprise customers.

Scale indicators2 records

Recent moves6 records

Expansion highlights5 records

ELECTRONIC & MECHANICAL competitors and assessment

Company assessment

Direct peers

  • Trescal: Trescal is a global, CDPQ-backed calibration and metrology services provider with broad ISO 17025 coverage across temperature, pressure, electrical, dimensional, and flow disciplines. It is the most direct large-scale competitor to EM-Calibrations in on-site industrial calibration.
  • Transcat: Transcat (NASDAQ: TRNS) is a US-based, publicly listed provider of accredited calibration services and distributed test/measurement instruments. It competes head-to-head with EM-Calibrations across temperature, pressure, electrical, and dimensional cal and also distributes calibration hardware.
  • Davis Calibration: Davis Calibration is a US regional ISO 17025-accredited calibration lab serving aerospace, medical, and industrial accounts with on-site capability. It is a directly comparable mid-sized regional competitor to EM-Calibrations in temperature, pressure, dimensional, and electronic calibration.
  • Clark Testing: Clark Testing is a US accredited testing and calibration provider offering environmental, mechanical, electrical, and calibration services to aerospace, defense, and industrial customers. Its multi-vertical accredited lab model closely parallels EM-Calibrations' service mix.
  • Control-Tek Calibration Labs: Control-Tek operates an ISO 17025-accredited calibration lab in Pennsylvania serving aerospace, pharmaceutical, and manufacturing clients with on-site temperature, pressure, dimensional, and electronic cal. It is a closely comparable regional peer with an analogous mobile/service model.

Broad incumbents

  • Beamex: Beamex is a Finland-headquartered manufacturer of high-accuracy industrial calibration equipment plus calibration software/services. It overlaps EM-Calibrations on temperature/pressure/electrical calibration methodology and on the test/measurement distribution channel via partners like Yokogawa-adjacent ecosystems.
  • Fluke Calibration: Fluke Calibration, a Fortive division, is a leading global manufacturer of calibration instrumentation (pressure, temperature, electrical) and offers accredited calibration services. It is broadly comparable as a category-defining incumbent whose hardware and standards EM-Calibrations implicitly aligns with.

Emerging players

  • Morehouse Instrument Company: Morehouse Instrument is a US specialist in force and pressure calibration equipment and services. It is thematically comparable as a niche, accreditation-driven cal provider—though narrower in scope than EM-Calibrations, which spans temperature, dimensional, and electrical as well.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat5 records

Key risks6 records

Key highlights7 records

Customer concentration

ELECTRONIC & MECHANICAL social profiles

Digital presence

ELECTRONIC & MECHANICAL compliance and trust

Trust signal

Compliance8 records

ELECTRONIC & MECHANICAL financial estimates

Financial estimate

Revenue estimate

Valuation estimate

ELECTRONIC & MECHANICAL leadership team

Management profile

Number of profiles

Profiles9 records

ELECTRONIC & MECHANICAL funding detail

Funding detail

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

ELECTRONIC & MECHANICAL M&A and investment

M&A and investment

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about ELECTRONIC & MECHANICAL

What does ELECTRONIC & MECHANICAL do?

EM-Calibrations provides on-site calibration services and repair for temperature, pressure, dimensional, electrical, and vacuum instrumentation at customer facilities across New England and the Eastern United States. The company also conducts NADCAP-approved oven/furnace temperature uniformity surveys using Yokogawa DAQStation data acquisition equipment, and offers electrical and automation system design, installation, and retrofit services staffed by a Master Licensed Electrician.

Is ELECTRONIC & MECHANICAL a public or private company?

ELECTRONIC & MECHANICAL is a private company. It is classified as corporate owned and is currently operating.

When was ELECTRONIC & MECHANICAL founded?

ELECTRONIC & MECHANICAL was founded in -1. It employs 11 to 50 people.

Where is ELECTRONIC & MECHANICAL based?

ELECTRONIC & MECHANICAL is headquartered in Sutton, United States, in the North America region.

How does ELECTRONIC & MECHANICAL make money?

Four revenue lines are on record. On-Site Calibration Services are the primary driver. The others are oven/Furnace Uniformity Surveys, electrical/Automation System Services and equipment Distribution (Yokogawa, Marlin).

Who are ELECTRONIC & MECHANICAL's main competitors?

Direct peers on record are Trescal, Transcat, Davis Calibration, Clark Testing and Control-Tek Calibration Labs. Broad incumbents are Beamex and Fluke Calibration. Morehouse Instrument Company is listed as an emerging player.

Does ELECTRONIC & MECHANICAL have an API?

No public API is recorded for ELECTRONIC & MECHANICAL.

What industry is ELECTRONIC & MECHANICAL in?

ELECTRONIC & MECHANICAL's product category is Industrial Calibration Services. Its primary akta.pro industry code is IMAGAFAH, Calibration Services & Standards (Calibration labs, reference standards, traceability services). Its NAICS code is 54138 and its SIC code is 8734.

Unlock the full company data

50 free credits on sign-up, no credit card required.

Contact sales