What Gasmet Technologies does

Gasmet Technologies Oy is a Finnish designer and manufacturer of gas analysis and continuous emission monitoring systems, headquartered in Vantaa, Finland, and operating as a wholly-owned subsidiary of the Sweden-based Nederman Group. The company builds its products around two proprietary measurement technologies: Fourier Transform Infrared (FTIR) spectroscopy, which scans the full infrared spectrum to identify and quantify multiple gas compounds simultaneously (up to 50 gases in a single analyzer, with a library covering over 5,000 identifiable and 500 quantifiable species), and Cold Vapor Atomic Fluorescence (CVAF) for ultra-low-level mercury detection. Its product portfolio spans stationary continuous emission monitoring systems (CEMS II e, CX-series, CMM mercury monitor, GT90 Dioxin+ sampler), portable FTIR analyzers (GT6000 Mobilis, GT5000 Terra), the Calcmet spectral analysis software, and the Insight digital data platform. TÜV QAL1, MCERTS, EN 15267, EN 14181, and EN 1948-1 certifications position these products for sale into regulated industrial stacks under the EU Industrial Emissions Directive, BREF, and BAT frameworks. With over 2,000 systems delivered globally and a multi-channel go-to-market combining direct enterprise sales, regional offices in Finland, Germany, and Hong Kong, and a certified global distributor network, Gasmet primarily serves waste incineration, waste-to-energy, cement, aluminum, power generation, chemical processing, environmental research, and occupational safety/HAZMAT end markets. Revenue is generated through capital equipment sales, multi-year service and QAL2/QAL3 compliance contracts, software licensing and updates, and consumables such as dioxin sampling systems, with pricing structured on a quote-based model tied to certification scope, gas matrix, and installation complexity.

Name

Gasmet Technologies

Legal name

Gasmet Technologies Oy

Website

https://gasmet.com

Company type

Private

Founded year

1990

Operating status

Operating

Headcount range

51–100 employees

Short description

Gasmet Technologies Oy, a Finland-based Nederman Group subsidiary, designs and manufactures FTIR and CVAF gas analysis systems for continuous emission monitoring, stack testing, and environmental research, serving waste-to-energy, cement, power, and chemical operators globally.

Ownership category

akta.pro rank

Headquarters

HQ city

Vantaa

HQ country

Finland

HQ region

Europe

Offices3 records

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Technology or R&D, Supply Chain, Personnel, Operations, Marketing or Sales, Infrastructure

Revenue model

1. Emission Monitoring Hardware Systems: Sale of continuous emission monitoring systems (CEMS II e, CMM, GT7000 Tellus) and portable gas analyzers (GT6000 Mobilis, GT5000 Terra). These are capital equipment purchases with installation and commissioning services. Systems are sold directly and through global distributor network.
2. Software and Digital Products: Calcmet analytical software and Insight digital platform for data management and monitoring. Software licensing and updates accompany hardware sales.
3. Service and After-Sales Support: Global service and support network providing installation, calibration, maintenance, and technical support for emission monitoring systems. Includes QAL2 compliance measurements and stack testing services.
4. Dioxin Sampling Systems: GT90 Dioxin+ long-term dioxin sampling systems for persistent organic pollutant monitoring. Specialized consumables and service for regulatory compliance.

Pricing tiers

Go-to-market motion2 records

Distribution channels3 records

Marketing channels7 records

Core offering

Gasmet Technologies designs, manufactures, and services gas analysis and emission monitoring systems based on FTIR and CVAF technologies. Its portfolio spans stationary Continuous Emission Monitoring Systems (CEMS), portable FTIR gas analyzers for stack testing, dioxin sampling systems, and supporting digital software (Calcmet, Insight) for industrial operators, environmental researchers, and safety organizations.

Product overview

Gasmet Technologies offers a comprehensive portfolio of gas analysis and emission monitoring solutions organized into four main product lines: Emission Monitoring Systems (continuous stationary systems including CEMS II e, CMM mercury monitoring, GT90 Dioxin+ sampling, and CX-series FTIR analyzers), Portable Gas Analyzers (GT6000 Mobilis and GT5000 Terra for field and stack testing applications), Digital Products (Insight data platform and Calcmet software for spectral analysis), and supporting Technologies (FTIR and CVAF core technologies). The portfolio is built on FTIR (Fourier Transform Infrared) and CVAF (Cold Vapor Atomic Fluorescence) as the two primary measurement technologies. The products serve three main application areas: industrial emission monitoring for regulatory compliance (waste incineration, power plants, cement, aluminum), environmental research (greenhouse gas flux, soil measurements), and occupational safety (CBRNE detection, lithium-ion battery safety, confined space monitoring).

Differentiator

Problem solved

Functional benefit

Products and services

• GT7000 Tellus Rack-mountable FTIR gas analyzer designed for multi-gas analysis in fixed measurement systems. Supports simultaneous measurement of up to 50 gases with a heated 180°C sample cell for hot, wet, and corrosive raw gas streams.
• Continuous Emission Monitoring System CEMS II e TÜV and MCERTS certified continuous emission monitoring system (QAL1) utilizing FTIR technology for demanding emission monitoring applications. Simultaneously measures 16 gases including H2O, CO2, CO, N2O, NO, NO2, SO2, HCl, HF, NH3, CH4, C2H6, C3H8, C2H4, C6H14, and CH2O.
• Continuous Mercury Monitoring System CMM Hg-CEMS with the world's lowest EN 15267 certified range (0-5 µg/m³) utilizing Cold Vapor Atomic Fluorescence (CVAF) technology. Features automatic and integrated QAL3 validation tool for continuous mercury monitoring from hot, wet and corrosive gas streams.
• GT90 Dioxin+ Long-term dioxin sampling system conforming to European standards EN 1948-1 and EN 15267. Designed for automated sampling of dioxin emissions and furans with cutting-edge isokinetic sampling technology.
• CX4000 FTIR Gas Analyzer FTIR gas analyzer designed for stationary continuous emission monitoring applications, powering CEMS systems for laboratory-grade stationary measurements.
• CX4015 FTIR Gas Analyzer FTIR gas analyzer for stationary emission monitoring applications.
• GT6000 Mobilis World's smallest EN15267-4 QAL1 certified (MCERTS) portable FTIR gas analyzer for stack testing and compliance measurements. Features real-time monitoring with tablet viewing, measures up to 50 gases simultaneously, suitable for hot and humid sample gas conditions.
• GT5000 Terra Portable multi-gas FTIR analyzer designed for splash-proof applications in environmental research, safety, and field measurement campaigns. Used for greenhouse gas flux measurements, container inspections, and battery safety testing.
• DX4015 Portable FTIR Gas Analyzer Portable FTIR gas analyzer for flue gas and emission analysis in field applications.
• Insight Digital Platform Digital solution platform providing secure and smart 24/7 access to Gasmet CEMS data, enabling real-time monitoring and data management for continuous emission monitoring systems.
• Calcmet Software Proprietary software for FTIR spectral data processing. Calculates gas concentrations from spectral fingerprints, identifies unknown compounds, supports quantitative analysis for over 500 gases and identification of over 5,000 gas species.
• Multipoint Sampling System MSSH Multi-point sampling system for comprehensive gas analysis across multiple measurement points in industrial applications.
• Oxygen Analyzer ZrO2 oxygen analyzer designed for continuous oxygen measurement of wet or dry flue gas, equipped with CEMS II e systems.
• GFID Analyzer Gas analyzer for total hydrocarbon measurement using Flame Ionization Detection technology.
• Portable Sampling System Portable sampling system designed for use with GT6000 Mobilis for stack testing and field measurements.
• Gasmet Calibrator Calibration device for Gasmet portable gas analyzers ensuring measurement accuracy.
• Monicon Gas Sensors and Monitors Gas sensors and monitors for industrial safety and environmental monitoring applications.
• SK Elektronik FID Analyzers Flame Ionization Detector analyzers from SK Elektronik for total hydrocarbon measurement.
• Winkler Sample Lines Sample line products for gas sampling applications.
• Gasmet Service and After-Sales Support Global service and support network providing installation, calibration, maintenance, and technical support for emission monitoring systems, including QAL2 compliance measurements and stack testing services.

Quantifiable outcome

• Mercury monitoring with lowest EN 15267 certified range (0-5 µg/m3)
• +4 more outcomes

Named customers12 records

Segments5 records

Ideal customer profiles4 records

Technology focussed Yes

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature7 records

Partnerships

Four partnerships are on record, tiered core, minor and flagship.

• VTT Technical Research Centre of FinlandcoreStrategic or Co-development Partner · 12 March 2026Gasmet joined VTT's METECH project to develop reliable emission measurement solutions for next generation fuels. The partnership focuses on creating measurement technologies that can accurately monitor emissions from emerging fuel types as the energy transition accelerates.
• Finnish Defence and Aerospace Industries Association (PIA)minorOthers · 26 January 2026Gasmet Technologies joined PIA (Puolustus- ja Ilmailuteollisuus), the Finnish Defence and Aerospace Industries Association. Membership enables Gasmet to participate in national defense and aerospace industry initiatives and collaborate with other Finnish technology companies in this sector.
• Nederman GroupflagshipOthersGasmet is part of the Nederman Group, a global leader in industrial air filtration and environmental technology. The group includes subsidiaries like Nederman Mikropul, Nederman Pneumafil, Auburn, LCI, Luwa, Menardi, NEO Monitors, Nordfab, RoboVent, and Olicem, representing a comprehensive ecosystem for industrial measurement and filtration solutions.
• Svante TechnologiescoreTechnology or IntegrationPartnership with Svante, a carbon capture technology provider. Gasmet FTIR gas measurement technology is deployed at Svante's carbon capture demonstration site at Lafarge's cement manufacturing facility in Richmond, BC, supporting research into commercial CO2 capture technologies.

Scale indicators3 records

Recent moves6 records

Expansion highlights6 records

Direct peers

• HORIBA: HORIBA's Process & Environmental division offers FTIR, NDIR, and chemiluminescence-based CEMS solutions for stack emission monitoring at power plants, cement, and waste facilities—directly competing with Gasmet's product portfolio and customer verticals.
• Durag Group: Durag is a German specialist in continuous emission monitoring, dust measurement, and process gas analysis with strong European industrial compliance market presence—a direct competitor to Gasmet in CEMS for waste incineration and power generation.
• MKS Instruments: MKS Instruments offers FTIR-based process gas analysis and emissions monitoring products serving semiconductor, industrial, and environmental markets—an overlapping competitor in FTIR analytical instrumentation.
• NEO Monitors: NEO Monitors is a sibling brand within the Nederman Group specializing in TDLAS-based gas detection and continuous emissions monitoring. Despite shared ownership, it is a direct technology peer competing in the same end markets.
• Environnement SA: French-based specialist in continuous ambient air and stack emission monitoring, including FTIR and multi-gas analyzers certified to EN 15267. Competes directly with Gasmet in EU regulatory CEMS markets.
• Servomex: Servomex (part of Spectris) supplies gas analyzers for industrial process and emissions applications, including FTIR and NDIR technologies. Overlaps with Gasmet in industrial emissions, combustion analysis, and process gas measurement.
• SICK AG: SICK is a leading German manufacturer of CEMS, process gas analyzers, and FTIR/NDIR emission monitoring solutions serving the same waste incineration, cement, power, and chemical industries as Gasmet. It is the most direct head-to-head competitor in European CEMS.

Broad incumbents

• Ametek: Ametek's Process & Analytical Instruments division supplies FTIR, NDIR, and other gas analyzers for industrial emissions, process monitoring, and compliance—overlapping with Gasmet in regulated industrial applications.
• Endress+Hauser: Endress+Hauser is a major process instrumentation supplier with analytical gas measurement products serving chemical, power, and environmental customers. It competes broadly with Gasmet in industrial gas analysis.
• Thermo Fisher Scientific: Thermo Fisher is a global analytical instrument giant offering FTIR, IR, and process gas analyzers through its Specialty Diagnostics and Analytical Instruments segments. While broader in scope, it competes with Gasmet in FTIR-based emission monitoring.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat4 records

Key risks5 records

Key highlights6 records

Customer concentration

• Xx.com/Gasmet_Tech
• Facebookfacebook.com/gasmettechnologies
• LinkedInlinkedin.com/company/gasmet-technologies

Compliance6 records

Revenue estimate

Valuation estimate

Number of profiles

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Gasmet Technologies