Developer docs
API playgroundTry for free, no card

Search company profiles

MicroCraft

Full company profile

uuid00217ru

Namestring
MicroCraft
Legal namestring
MicroCraft K.K.
Company typeenum
Private
Founded yearint
1972
Descriptiontext

MicroCraft K.K. is a privately-held Japanese specialty equipment manufacturer founded in 1972 and headquartered in Okayama, with wholly-owned sales and engineering operations in the United States (USA MicroCraft, Inc., Anaheim, CA and a Minnesota Software Center opened in 2019), Korea (MicroCraft Korea Co., Ltd., Gunpo-si), China (Shanghai MicroCraft Ltd.), and India. The company designs, manufactures, and services three core product lines targeting printed circuit board (PCB) manufacturers worldwide: EMMA moving-probe flying-probe testers for bare-board electrical continuity and isolation testing (over 2,100 units installed), CraftPix UV-curing on-demand inkjet printing systems that digitize legend, solder resist, and etch resist printing, and Sarra TDR/VNA testers for high-frequency impedance and S-parameter measurement on PCBs and package substrates. MicroCraft's commercial model is direct enterprise sales plus a technically-trained distributor network covering more than 12 countries, supported by eight global technical service centers, ISO 9001-certified quality operations, recurring software revenue (EMMA2020, EXT, ParCAM, JetPrint SE, etc.), and ink/ consumable tie-ins through its CraftPix ink ecosystem.

The technical differentiators behind the EMMA line include the company's proprietary Phase Difference Measurement (PDM) method, which accelerates continuity and isolation testing; digital Probe Pressure Control (PPC) on Type 9 and Type 10 probes with minimum pad sizes down to 10 micrometers; predictive defect detection via the LATENT Test; High Voltage Stress testing; and Kelvin 4-wire resistance measurement down to 0.001 milliohm. CraftPix uses UV-cure simultaneous print-and-cure architecture with automatic ink recycling that keeps ink waste below 1%, and integrates Epson MEMS high-definition print heads in its newest C1E/C2E models. Sarra systems are built around short cable paths with no switching box, supporting high-frequency measurements with Keysight, Rohde & Schwarz, Anritsu, Tektronix, and FormFactor instrumentation up to 67 GHz for 5G and high-speed PCB applications. The company is family-led, with CEO Takayuki Hidehira having succeeded Yorio Hidehira in September 2024, and in November 2025 extended its reach into MEMS design-simulation-fabrication services through a strategic collaboration with Siemens Cre8Ventures.

Short descriptiontext

MicroCraft K.K. is a privately-held Japanese specialty equipment maker (founded 1972, Okayama) that designs, manufactures, and services EMMA flying-probe PCB testers, CraftPix UV inkjet printing systems, and Sarra TDR/VNA testers sold to global PCB manufacturers through direct offices and a 12+ country distributor network.

Operating statusenum
Operating
Ownership categoryenum
Headcount rangeband
11–50
akta.pro rankint
HeadquartersAnaheim, United States
HQ citystring
Anaheim
HQ countrystring
United States
HQ regionstring
North America
Markets served

Serves global market

Offices5 records

Each record includes

City, Country, Type, Description, Source

Keyword5 values
printed circuit board testing, moving probe testers, inkjet printing systems, PCB inspection equipment, TDR VNA measurement
Industry2 codes
PRIMARYHDAHAOAI
PCB Assembly (PCBA/EMS)
Hardware, Technology & Telecom/Semiconductors & Electronic Components/Connectors, Interconnects & Printed Circuit Boards (PCBs)
SECONDARYHDAHAOAG
PCB Fabrication (Rigid PCBs)
Hardware, Technology & Telecom/Semiconductors & Electronic Components/Connectors, Interconnects & Printed Circuit Boards (PCBs)
NAICS code1 code
  • Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals334515
SIC code2 codes
  • Instruments For Meas & Testing Of Electricity & Elec Signals3825
  • Industrial Instruments For Measurement, Display, And Control3823
Product category
PCB Inspection Equipment
No data
GTM motion1 record

Each record includes

Type, Description, Source

Revenue model5 records
1EMMA Moving Probe Tester Sales
TypeHardware Sales
Description

Sale of flying probe continuity and isolation testers for bare board PCB testing. The EMMA series includes various models (M, H, S, AL series) with different probe configurations and automation levels.

usamicrocraft.com
2CraftPix Inkjet Printing System Sales
TypeHardware Sales
Description

Sale of UV curing on-demand inkjet printing systems for PCB legend, solder resist, and etch resist printing. Includes various models from budget to super high-speed production models.

usamicrocraft.com
3Sarra TDR/VNA Tester Sales
TypeHardware Sales
Description

Sale of TDR (Time Domain Reflectometry) and VNA (Vector Network Analyzer) testers for impedance and S-parameter measurements on high-frequency PCBs and package boards.

usamicrocraft.com
4Software Licenses and Updates
TypeLicensing Royalties
Description

Software products including EMMA2020, EXT, PAR, ParCAM, TPG, EVS, InkJet Edit, JetPrint SE, and MicroCraft PT Viewer. Software updates released periodically (e.g., version 9.40.001a, 3.21.329).

usamicrocraft.com
5Technical Support Services
TypeProfessional Services
Description

Technical support and service through eight locations worldwide. Field service engineers and technical support centers provide installation, maintenance, and support.

usamicrocraft.com
Marketing channels3 records

Each record includes

Title, Type, Stage, Description, Source

Distribution channels2 records

Each record includes

Title, Type, Scope, Target buyer, Description, Source

Cost components6 values
Technology or R&D, Personnel, Supply Chain, Operations, Marketing or Sales, Infrastructure
GTM typeB2B
B2B
Offering typeHardware or Manufacturing
Hardware or Manufacturing
Brand1 of 6 records shown
1EMMA
Description

Moving Probe Tester series for electrical testing of printed circuit boards

usamicrocraft.com
+5 more records
Core offering1 text field

MicroCraft manufactures and sells three core product lines for printed circuit board (PCB) manufacturing: EMMA moving probe testers for fixtureless electrical continuity and isolation testing of bare PCBs, CraftPix UV-curing on-demand inkjet printing systems for digital PCB legend, solder resist, and etch resist printing, and Sarra TDR/VNA testers for high-precision impedance and S-parameter measurement of high-frequency PCBs and package boards. The equipment is sold worldwide through direct sales offices and a technically trained distributor network.

Differentiator
Functional benefit
Problem solved
Quantifiable outcome1 of 5 values shown
  • Test speed: Over 10,000 test points per minute with 8-probe E8M series
+4 more records
Product overview1 text field

MicroCraft is a technology company specializing in printed circuit board inspection and digital printing systems. The product portfolio centers on three core product lines: EMMA (moving probe testers for bare board electrical testing), CraftPix (on-demand UV inkjet printing systems for PCB manufacturing), and Sarra (TDR/VNA testers for impedance measurement). EMMA offers a comprehensive series architecture including M Series (standard), H Series (high accuracy), S Series (super high accuracy), AL Series (auto loader automation), F2 Series (flatbed/flexible boards), and E8 Series (8-probe high speed), all utilizing flying probe technology with digital PPC probe pressure control. CraftPix provides a tiered lineup of UV inkjet printers ranging from C8K (8 print head flagship) through C4K (4-head), C2K (standard 2-head), C2E (Epson high-def dual), C1E (Epson high-def single), C1K (budget), to C1F (high-def single) models, with specialized variants including C2K-T dual-ink and Small Volume Ink Type options. Sarra delivers TDR and VNA measurement capabilities through S2V/S3V/S4V54 (VNA-equipped), S1T/S2T (moving probe), H1/H2 (single-sided automated), H1C34-M (auto loader), and MZPC (standalone meter) models. Supporting software includes EMMA2020/EMMA2010 control software, EXT test point generation, ParCAM DFM analysis, TPG, EVS, Free Viewer, InkJet Edit data processing, and JetPrint SE operation software. MicroCraft also offers Quick Verification System for grid tester integration and multiple measurement unit options (Kelvin Probe, LATENT Test, HVS, Hipot) for enhanced inspection capabilities.

Product and service3 records
1EMMA Moving Probe Tester
CategoryMoving Probe Testers
Description

EMMA is an electrical test machine for bare printed circuit boards. It uses unique flying probes to move at high speed and perform continuity and isolation tests on both sides of the board simultaneously without requiring a fixture jig, thus dramatically reducing test preparation time. The series includes M (standard), H (high accuracy), S (super high accuracy), AL (auto loader for unattended operation), F2 (flat bed for flexible boards), and E8 (8-probe high speed) configurations. Speeds reach over 10,000 test points/min and minimum pad sizes down to 10 micrometers.

2CraftPix On-Demand InkJet Printing System
CategoryIndustrial Inkjet Printing Systems
Description

CraftPix is a UV curing type industrial inkjet printer that prints and cures ink simultaneously, digitizing PCB manufacturing by replacing conventional screen printing, exposure, and development processes. The series includes C8K (8 print heads, flagship super high speed), C4K (4 print heads, high speed), C2K (standard 2-head), C2E/C1E (Epson high-definition), C1K (budget), C1F (high-def single head), and C2K-T (dual ink) models. The flagship C8K7265T prints 22.8x17 inch panels in 6 seconds. Automatic ink recycling reduces waste to less than 1%.

3Sarra TDR/VNA Tester
CategoryHigh-Frequency PCB Testers
Description

Sarra is a TDR (Time Domain Reflectometry) and VNA (Vector Network Analyzer) tester series for high-precision impedance and S-parameter measurements on high-frequency printed circuit boards and package boards. Compared to conventional fixture methods, the system uses shorter cables and no switching box, resulting in extremely small transmission loss and very good probe characteristics. The series includes S2V/S3V/S4V54 (VNA-equipped, supports 5G applications), S1T/S2T (moving probe TDR), H1/H2 (automated single-sided), H1C34-M (auto loader, 24-hour unmanned), and MZPC (standalone meter) models.

Scale indicator9 records

Each record includes

Type, Value, Description, Source

Partnership1 partner
Strategic tierStrategicTypeStrategic or Co-development PartnerAnnounced on2025-11-27
Description

Microcraft (UK venture based at University of Southampton's wafer fab) entered collaboration with Siemens Cre8Ventures to provide design-simulation-fabrication services for MEMS (Micro-Electro-Mechanical Systems) across the UK and Europe. The partnership combines Microcraft's custom fabrication capabilities with Siemens's cloud-based EDA tools and digital-twin validation facilities, allowing innovators to simulate and validate designs before physical production.

Recent move11 records

Each record includes

Date, Type, Title, Description, Source

Expansion highlight5 records

Each record includes

Type, Description

Peers10 records
TypeOthers
Description

Global independent PCB testing services provider using flying probe and grid testers (including atg/L&M equipment). Comparable end-customer base to MicroCraft and listed in MicroCraft's supported UTL integrations.

2Hioki E.E. Corporation
TypeDirect peer
Description

Japanese manufacturer of electrical test and measurement instruments including PCB testers. Closely comparable Japanese-headquartered peer with overlapping PCB electrical test exposure.

TypeBroad incumbent
Description

Premium German test and measurement vendor. Competes with Sarra in VNA-based high-frequency PCB measurement and is also a supported VNA partner in MicroCraft's Sarra ecosystem.

TypeBroad incumbent
Description

Global leader in electronic test and measurement instrumentation. Directly competes with MicroCraft's Sarra TDR/VNA series for high-frequency PCB impedance and S-parameter measurement, and is also a partner via GPIB/USB instrument integration.

TypeBroad incumbent
Description

Major oscilloscope and TDR instrumentation vendor. Competes with Sarra H1C34-M TDR measurement systems and is also a supported oscilloscope partner in MicroCraft's high-frequency test workflow.

TypeBroad incumbent
Description

Japanese test and measurement company with strong vector network analyzer portfolio. Overlaps with MicroCraft's Sarra line in high-frequency PCB impedance and S-parameter testing.

TypeBroad incumbent
Description

Acquired Orbotech, a leading PCB AOI and inspection equipment vendor. Broader incumbent serving PCB manufacturers with automated optical inspection, complementing MicroCraft's electrical test focus.

TypeDirect peer
Description

Israel-based supplier of flying probe PCB testers and automation. Competes head-to-head with MicroCraft EMMA in bare-board continuity and isolation testing for PCB fab customers worldwide.

TypeDirect peer
Description

German-headquartered manufacturer of flying probe and grid bare-board PCB testers. Most direct competitor to MicroCraft's EMMA line in the fixtureless PCB electrical test segment, serving overlapping global PCB manufacturers.

TypeBroad incumbent
Description

Japanese industrial measurement and control instrumentation conglomerate. Comparable as a Japan-headquartered broad test & measurement incumbent that could expand into PCB-specific test equipment.

Market position
Strengths5 records

Each record includes

Headline, Details, Source

Weaknesses5 records

Each record includes

Headline, Details, Source

Competitive moat5 records

Each record includes

Type, Details

Key risks6 records

Each record includes

Headline, Details, Source

Key highlights7 records

Each record includes

Headline, Details, Source

Customer concentration

Classification, Details

Segment4 records

Each record includes

Title, Type, Primary, Description, Pain point addressed, Use case, Source

Ideal customer profile3 records

Each record includes

Profile, Firmographic size, Sales motion, Sales cycle length, Buying structure, Purchase trigger, Buyer persona, Geography, Industry vertical, Primary use case, Description, Pain points, Evidence proof points, Target buyer

Technology focused
Yes
API detail
Has APIbool
No

Docs URL, Description

Integration69 records

Each record includes

Title, Type, Description, Source

AI maturity
App detail

Has app

Feature10 records

Each record includes

Title, Differentiator, Description, Source

Core technology
Revenue estimate
Valuation estimate
Number of profiles
Profiles1 record

Each record includes

Name, Designation, Designation category, Overview, Profile commentary, Source

Subsidiaries4 records

Each record includes

Name, Acquired on, Relationship type, Type, Business focus

Compliance1 record

Each record includes

Name, Class, Description

Funding overview

Funding stage, Last funding date, Total funding USD

Funding rounds

Each record includes

Round, Amount USD, Date, Pre money valuation, Total investors, Investors, News

Investors

Each record includes

Name, Type, Date of entry, Rounds participated, Website

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Each record includes

Name, Acquisition type, Announced date, Completed date, Status, Website, News

Investment

Each record includes

Name, Round, Announced date, Lead investor, Website, News

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

MicroCraft

PCB Inspection Equipmentusamicrocraft.com

MicroCraft K.K. is a privately-held Japanese specialty equipment maker (founded 1972, Okayama) that designs, manufactures, and services EMMA flying-probe PCB testers, CraftPix UV inkjet printing systems, and Sarra TDR/VNA testers sold to global PCB manufacturers through direct offices and a 12+ country distributor network.

What MicroCraft does

MicroCraft K.K. is a privately-held Japanese specialty equipment manufacturer founded in 1972 and headquartered in Okayama, with wholly-owned sales and engineering operations in the United States (USA MicroCraft, Inc., Anaheim, CA and a Minnesota Software Center opened in 2019), Korea (MicroCraft Korea Co., Ltd., Gunpo-si), China (Shanghai MicroCraft Ltd.), and India. The company designs, manufactures, and services three core product lines targeting printed circuit board (PCB) manufacturers worldwide: EMMA moving-probe flying-probe testers for bare-board electrical continuity and isolation testing (over 2,100 units installed), CraftPix UV-curing on-demand inkjet printing systems that digitize legend, solder resist, and etch resist printing, and Sarra TDR/VNA testers for high-frequency impedance and S-parameter measurement on PCBs and package substrates. MicroCraft's commercial model is direct enterprise sales plus a technically-trained distributor network covering more than 12 countries, supported by eight global technical service centers, ISO 9001-certified quality operations, recurring software revenue (EMMA2020, EXT, ParCAM, JetPrint SE, etc.), and ink/ consumable tie-ins through its CraftPix ink ecosystem.

The technical differentiators behind the EMMA line include the company's proprietary Phase Difference Measurement (PDM) method, which accelerates continuity and isolation testing; digital Probe Pressure Control (PPC) on Type 9 and Type 10 probes with minimum pad sizes down to 10 micrometers; predictive defect detection via the LATENT Test; High Voltage Stress testing; and Kelvin 4-wire resistance measurement down to 0.001 milliohm. CraftPix uses UV-cure simultaneous print-and-cure architecture with automatic ink recycling that keeps ink waste below 1%, and integrates Epson MEMS high-definition print heads in its newest C1E/C2E models. Sarra systems are built around short cable paths with no switching box, supporting high-frequency measurements with Keysight, Rohde & Schwarz, Anritsu, Tektronix, and FormFactor instrumentation up to 67 GHz for 5G and high-speed PCB applications. The company is family-led, with CEO Takayuki Hidehira having succeeded Yorio Hidehira in September 2024, and in November 2025 extended its reach into MEMS design-simulation-fabrication services through a strategic collaboration with Siemens Cre8Ventures.

MicroCraft firmographics

Firmographics
Name
MicroCraft
Legal name
MicroCraft K.K.
Website
https://usamicrocraft.com
Company type
Private
Founded year
1972
Operating status
Operating
Headcount range
11–50 employees
Short description
MicroCraft K.K. is a privately-held Japanese specialty equipment maker (founded 1972, Okayama) that designs, manufactures, and services EMMA flying-probe PCB testers, CraftPix UV inkjet printing systems, and Sarra TDR/VNA testers sold to global PCB manufacturers through direct offices and a 12+ country distributor network.
Ownership category
akta.pro rank

MicroCraft industry classification

Industry
Product category
PCB Inspection Equipment
NAICS
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals (334515)
SIC
Instruments For Meas & Testing Of Electricity & Elec Signals (3825), Industrial Instruments For Measurement, Display, And Control (3823)
akta.pro industry
PRIMARYHDAHAOAI
PCB Assembly (PCBA/EMS)
Hardware, Technology & Telecom/Semiconductors & Electronic Components/Connectors, Interconnects & Printed Circuit Boards (PCBs)
SECONDARYHDAHAOAG
PCB Fabrication (Rigid PCBs)
Hardware, Technology & Telecom/Semiconductors & Electronic Components/Connectors, Interconnects & Printed Circuit Boards (PCBs)

Keywords

  • Printed circuit board testing
  • Moving probe testers
  • Inkjet printing systems
  • PCB inspection equipment
  • TDR VNA measurement

Where MicroCraft is headquartered

Location

Headquarters

HQ city
Anaheim
HQ country
United States
HQ region
North America

Offices5 records

Markets served

MicroCraft business model

Business model
GTM type
B2B
Offering type
Hardware or Manufacturing
Cost components
Technology or R&D, Personnel, Supply Chain, Operations, Marketing or Sales, Infrastructure

Revenue model

  1. EMMA Moving Probe Tester Sales: Sale of flying probe continuity and isolation testers for bare board PCB testing. The EMMA series includes various models (M, H, S, AL series) with different probe configurations and automation levels.
  2. CraftPix Inkjet Printing System Sales: Sale of UV curing on-demand inkjet printing systems for PCB legend, solder resist, and etch resist printing. Includes various models from budget to super high-speed production models.
  3. Sarra TDR/VNA Tester Sales: Sale of TDR (Time Domain Reflectometry) and VNA (Vector Network Analyzer) testers for impedance and S-parameter measurements on high-frequency PCBs and package boards.
  4. Software Licenses and Updates: Software products including EMMA2020, EXT, PAR, ParCAM, TPG, EVS, InkJet Edit, JetPrint SE, and MicroCraft PT Viewer. Software updates released periodically (e.g., version 9.40.001a, 3.21.329).
  5. Technical Support Services: Technical support and service through eight locations worldwide. Field service engineers and technical support centers provide installation, maintenance, and support.

Go-to-market motion1 record

Distribution channels2 records

Marketing channels3 records

MicroCraft product offering

Product offering

Core offering

MicroCraft manufactures and sells three core product lines for printed circuit board (PCB) manufacturing: EMMA moving probe testers for fixtureless electrical continuity and isolation testing of bare PCBs, CraftPix UV-curing on-demand inkjet printing systems for digital PCB legend, solder resist, and etch resist printing, and Sarra TDR/VNA testers for high-precision impedance and S-parameter measurement of high-frequency PCBs and package boards. The equipment is sold worldwide through direct sales offices and a technically trained distributor network.

Product overview

MicroCraft is a technology company specializing in printed circuit board inspection and digital printing systems. The product portfolio centers on three core product lines: EMMA (moving probe testers for bare board electrical testing), CraftPix (on-demand UV inkjet printing systems for PCB manufacturing), and Sarra (TDR/VNA testers for impedance measurement). EMMA offers a comprehensive series architecture including M Series (standard), H Series (high accuracy), S Series (super high accuracy), AL Series (auto loader automation), F2 Series (flatbed/flexible boards), and E8 Series (8-probe high speed), all utilizing flying probe technology with digital PPC probe pressure control. CraftPix provides a tiered lineup of UV inkjet printers ranging from C8K (8 print head flagship) through C4K (4-head), C2K (standard 2-head), C2E (Epson high-def dual), C1E (Epson high-def single), C1K (budget), to C1F (high-def single) models, with specialized variants including C2K-T dual-ink and Small Volume Ink Type options. Sarra delivers TDR and VNA measurement capabilities through S2V/S3V/S4V54 (VNA-equipped), S1T/S2T (moving probe), H1/H2 (single-sided automated), H1C34-M (auto loader), and MZPC (standalone meter) models. Supporting software includes EMMA2020/EMMA2010 control software, EXT test point generation, ParCAM DFM analysis, TPG, EVS, Free Viewer, InkJet Edit data processing, and JetPrint SE operation software. MicroCraft also offers Quick Verification System for grid tester integration and multiple measurement unit options (Kelvin Probe, LATENT Test, HVS, Hipot) for enhanced inspection capabilities.

Differentiator

Problem solved

Functional benefit

Brands

  • EMMA: Moving Probe Tester series for electrical testing of printed circuit boards
  • CraftPix
  • Sarra
  • EMMA2010/EMMA2020
  • JetPrint SE
  • MicroCraft PT Viewer

Products and services

  • EMMA Moving Probe Tester EMMA is an electrical test machine for bare printed circuit boards. It uses unique flying probes to move at high speed and perform continuity and isolation tests on both sides of the board simultaneously without requiring a fixture jig, thus dramatically reducing test preparation time. The series includes M (standard), H (high accuracy), S (super high accuracy), AL (auto loader for unattended operation), F2 (flat bed for flexible boards), and E8 (8-probe high speed) configurations. Speeds reach over 10,000 test points/min and minimum pad sizes down to 10 micrometers.
  • CraftPix On-Demand InkJet Printing System CraftPix is a UV curing type industrial inkjet printer that prints and cures ink simultaneously, digitizing PCB manufacturing by replacing conventional screen printing, exposure, and development processes. The series includes C8K (8 print heads, flagship super high speed), C4K (4 print heads, high speed), C2K (standard 2-head), C2E/C1E (Epson high-definition), C1K (budget), C1F (high-def single head), and C2K-T (dual ink) models. The flagship C8K7265T prints 22.8x17 inch panels in 6 seconds. Automatic ink recycling reduces waste to less than 1%.
  • Sarra TDR/VNA Tester Sarra is a TDR (Time Domain Reflectometry) and VNA (Vector Network Analyzer) tester series for high-precision impedance and S-parameter measurements on high-frequency printed circuit boards and package boards. Compared to conventional fixture methods, the system uses shorter cables and no switching box, resulting in extremely small transmission loss and very good probe characteristics. The series includes S2V/S3V/S4V54 (VNA-equipped, supports 5G applications), S1T/S2T (moving probe TDR), H1/H2 (automated single-sided), H1C34-M (auto loader, 24-hour unmanned), and MZPC (standalone meter) models.

Quantifiable outcome

  • Test speed: Over 10,000 test points per minute with 8-probe E8M series
  • +4 more outcomes

Companies that use MicroCraft

Customer profile

Segments4 records

Ideal customer profiles3 records

MicroCraft technology and API

Technology

Technology focussed Yes

API detail

Has API
No
API docs
API detail

Core technology

AI maturity

App detail

Integration69 records

Feature10 records

MicroCraft partnerships and signals

Strategic signal

Partnerships

One partnership is on record.

  • Siemens Cre8VenturesstrategicStrategic or Co-development Partner · 27 November 2025Microcraft (UK venture based at University of Southampton's wafer fab) entered collaboration with Siemens Cre8Ventures to provide design-simulation-fabrication services for MEMS (Micro-Electro-Mechanical Systems) across the UK and Europe. The partnership combines Microcraft's custom fabrication capabilities with Siemens's cloud-based EDA tools and digital-twin validation facilities, allowing innovators to simulate and validate designs before physical production.

Scale indicators9 records

Recent moves11 records

Expansion highlights5 records

MicroCraft competitors and assessment

Company assessment

Others

  • Gardien Services: Global independent PCB testing services provider using flying probe and grid testers (including atg/L&M equipment). Comparable end-customer base to MicroCraft and listed in MicroCraft's supported UTL integrations.

Direct peers

  • Hioki E.E. Corporation: Japanese manufacturer of electrical test and measurement instruments including PCB testers. Closely comparable Japanese-headquartered peer with overlapping PCB electrical test exposure.
  • Test Systems Inc. (TSI): Israel-based supplier of flying probe PCB testers and automation. Competes head-to-head with MicroCraft EMMA in bare-board continuity and isolation testing for PCB fab customers worldwide.
  • atg Luther & Maelzer: German-headquartered manufacturer of flying probe and grid bare-board PCB testers. Most direct competitor to MicroCraft's EMMA line in the fixtureless PCB electrical test segment, serving overlapping global PCB manufacturers.

Broad incumbents

  • Rohde & Schwarz: Premium German test and measurement vendor. Competes with Sarra in VNA-based high-frequency PCB measurement and is also a supported VNA partner in MicroCraft's Sarra ecosystem.
  • Keysight Technologies: Global leader in electronic test and measurement instrumentation. Directly competes with MicroCraft's Sarra TDR/VNA series for high-frequency PCB impedance and S-parameter measurement, and is also a partner via GPIB/USB instrument integration.
  • Tektronix: Major oscilloscope and TDR instrumentation vendor. Competes with Sarra H1C34-M TDR measurement systems and is also a supported oscilloscope partner in MicroCraft's high-frequency test workflow.
  • Anritsu: Japanese test and measurement company with strong vector network analyzer portfolio. Overlaps with MicroCraft's Sarra line in high-frequency PCB impedance and S-parameter testing.
  • KLA (Orbotech): Acquired Orbotech, a leading PCB AOI and inspection equipment vendor. Broader incumbent serving PCB manufacturers with automated optical inspection, complementing MicroCraft's electrical test focus.
  • Yokogawa Electric: Japanese industrial measurement and control instrumentation conglomerate. Comparable as a Japan-headquartered broad test & measurement incumbent that could expand into PCB-specific test equipment.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat5 records

Key risks6 records

Key highlights7 records

Customer concentration

MicroCraft compliance and trust

Trust signal

Compliance1 record

MicroCraft financial estimates

Financial estimate

Revenue estimate

Valuation estimate

MicroCraft leadership team

Management profile

Number of profiles

Profiles1 record

MicroCraft subsidiaries and ownership

Company hierarchy

Subsidiaries4 records

MicroCraft funding detail

Funding detail

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

MicroCraft M&A and investment

M&A and investment

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about MicroCraft

What does MicroCraft do?

MicroCraft manufactures and sells three core product lines for printed circuit board (PCB) manufacturing: EMMA moving probe testers for fixtureless electrical continuity and isolation testing of bare PCBs, CraftPix UV-curing on-demand inkjet printing systems for digital PCB legend, solder resist, and etch resist printing, and Sarra TDR/VNA testers for high-precision impedance and S-parameter measurement of high-frequency PCBs and package boards. The equipment is sold worldwide through direct sales offices and a technically trained distributor network.

Is MicroCraft a public or private company?

MicroCraft is a private company. It is classified as family owned and is currently operating.

When was MicroCraft founded?

MicroCraft was founded in 1972. It employs 11 to 50 people.

Where is MicroCraft based?

MicroCraft is headquartered in Anaheim, United States, in the North America region.

How does MicroCraft make money?

Five revenue lines are on record. EMMA Moving Probe Tester Sales are the primary driver. The others are craftPix Inkjet Printing System Sales, sarra TDR/VNA Tester Sales, software Licenses and Updates and technical Support Services.

Who are MicroCraft's main competitors?

Gardien Services is listed as an others. Direct peers are Hioki E.E. Corporation, Test Systems Inc. (TSI) and atg Luther & Maelzer. Broad incumbents are Rohde & Schwarz, Keysight Technologies, Tektronix, Anritsu, KLA (Orbotech) and Yokogawa Electric.

Does MicroCraft have an API?

No public API is recorded for MicroCraft.

What industry is MicroCraft in?

MicroCraft's product category is PCB Inspection Equipment. Its primary akta.pro industry code is HDAHAOAI, PCB Assembly (PCBA/EMS), with a secondary code of HDAHAOAG, PCB Fabrication (Rigid PCBs). Its NAICS code is 334515 and its SIC code is 3825.

Unlock the full company data

50 free credits on sign-up, no credit card required.

Contact sales
Live signals