Miller Technology
- Company typePrivate
- Founded1979
- HeadquartersNorth Bay, Canada
- Headcount11–50
- GTM typeB2B
- OfferingHardware or Manufacturing
What Miller Technology does
Miller Technology Incorporated is a specialist mining-vehicle manufacturer based in North Bay, Ontario, Canada, founded in 1979 and privately held and owner-operated by President & CEO Dan Bachand. It designs, engineers, manufactures and delivers mine-spec light utility vehicles for mining operators above and below ground, including Tier 1 mining companies, underground mine operators and surface mining operations. The company controls the full value chain from its own 55,000 sq ft plant at 175 Eloy Road, with no third-party suppliers in the build, and its vehicles operate on mine sites across five continents.
The product architecture is platform-plus-modules. The core platforms are the Miller-modified Toyota Land Cruiser (diesel Mining Landcruiser, 1-tonne 78-series with a 6-cylinder 128 HP Toyota diesel), the battery-electric Landcruiser Electric conversion of that same platform (90 kW / 200 Nm motor, 46 kWh Li-ion battery), the Relay battery electric vehicle, and the low-profile underground grader line (Miller BG 110-M diesel, E-Grader ION 110M electric). Underpinning the electric line is the proprietary in-house Ionic Drive drivetrain, a 43 kWh / 533 VDC battery pack with integrated battery management, thermal management and onboard monitoring achieving 2018 DNV GL Type Approval, off-board CCS Type 2 DC fast charging with optional on-board AC charging up to 600 VDC delivering 10-12 hours of operation from an 18-minute charge, regenerative braking that recovers up to 2 hours of operating time, and bidirectional telemetry over Wi-Fi or LTE enabling remote software updates. On the chassis side, Miller applies proprietary strengthening and high-strength materials to reach a 1-tonne load rating with GVM upgrades above 4 tonnes, ISO-certified ROPS/FOPS Level 1 and 2 structures (ISO 3449/3471) with Sealed Integrated Braking System, and a 22-section replaceable tyre design that allows section replacement rather than whole-tyre replacement. Modular bodies and attachments extend the Land Cruiser base into mining service trucks (fuel, lube, mechanic, water tanker), personnel carriers, mine rescue vehicles, elevated work platforms and explosives transport vehicles.
Revenue is generated from three streams: one-time, project-based sale of custom-built vehicles and graders priced by quote (no list prices or financing terms published), sale of electric conversion kits that retrofit Toyota Land Cruisers to zero-emission, and a recurring aftermarket stream of genuine OEM parts, preventative maintenance programs, diagnostics, rebuilds and upgrades delivered through in-country technicians and support teams in key mining regions. Go-to-market is a direct, relationship-led enterprise motion with "no middlemen, call centres or sales reps," supported by a small dealer network (Classic Motors Inc. serves the US market from Richfield, Utah) plus regional parts and service presence. The company reports 51-100 employees, no disclosed revenue, no funding rounds, no institutional investors and no subsidiaries.
Miller Technology firmographics
Firmographics- Name
- Miller Technology
- Legal name
- Miller Technology Incorporated
- Website
- https://millertechnology.com
- Company type
- Private
- Founded year
- 1979
- Operating status
- Operating
- Headcount range
- 11–50 employees
- Ownership category
- akta.pro rank
Miller Technology industry classification
Industry- Product category
- Mining Vehicles and Mining Equipment
- NAICS
- Automobile and Light Duty Motor Vehicle Manufacturing (33611), Motor Vehicle Electrical and Electronic Equipment Manufacturing (33632), Engine, Turbine, and Power Transmission Equipment Manufacturing (3336)
- SIC
- Truck & Bus Bodies (3713), Motors & Generators (3621), Special Industry Machinery (No Metalworking Machinery) (3550)
- akta.pro industry
- Specialty Off-Road Utility Vehicles (UTVs, ATVs, Side-by-Sides)Industrials, Manufacturing & Construction/Industrial Machinery & Heavy Equipment/Heavy Transportation & Off-Highway VehiclesSpecialty Truck Manufacturing (Fire/Rescue/Military-Commercial/Expedition)Industrials, Manufacturing & Construction/Automotive & Mobility Manufacturing/Commercial Vehicle & Truck ManufacturingLight Electric Vehicles (NEVs/LSEVs/Quadricycles) ManufacturingIndustrials, Manufacturing & Construction/Automotive & Mobility Manufacturing/Micromobility & Light Electric Mobility Manufacturing (E-bikes/E-scooters/NEVs)
Keywords
Where Miller Technology is headquartered
LocationHeadquarters
- HQ city
- North Bay
- HQ country
- Canada
- HQ region
- North America
Offices2 records
Markets served
Miller Technology business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Personnel, Supply Chain, Infrastructure, Technology or R&D, Marketing or Sales
Revenue model
- Vehicle and equipment sales (diesel and electric mining vehicles): One-time sale of custom-built mining light utility vehicles, graders and attachments designed and manufactured in-house at the North Bay, Ontario facility. Revenue is project-based/specification-driven, with each vehicle configured to the customer's site requirements and sold via direct quotes and dealers; electric and diesel variants are sold alongside each other to capture fleet electrification demand.
- Electric conversion kits: Sale of electric conversion kits that turn trusted Toyota Land Cruisers into zero-emission vehicles, alongside complete battery-electric Land Cruisers and the Relay BEV. Sold as engineered products supporting customers' fleet-electrification plans.
- Parts, service and after-sales support: Recurring aftermarket stream: supply of genuine Miller Technology parts (with left- and right-hand drive options) from stocked inventory, plus preventative maintenance programs, diagnostics, equipment rebuilds and upgrades, on-site and remote technical support from teams based in key mining regions. Warranty-backed replacements add to recurring revenue and support fleet uptime.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| One time/ perpetual license | One time/ perpetual license | Custom-built mining vehicles and graders priced per configuration on request |
Go-to-market motion3 records
Distribution channels4 records
Marketing channels5 records
Miller Technology product offering
Product offeringCore offering
Miller Technology designs, develops and manufactures bespoke mine-spec light utility vehicles at its North Bay, Ontario plant: Miller-modified Toyota Land Cruiser-based diesel and battery-electric utility vehicles, the Relay battery electric vehicle, low-profile underground graders, and a modular family of bodies and attachments covering service trucks, personnel carriers, mine rescue vehicles, elevated work platforms and explosives transport. Each vehicle is configured to the customer's site requirements and sold as a one-time purchase through direct quotes and a small dealer network, with a recurring parts, maintenance, rebuild and on-site/remote support business.
Product overview
Miller Technology's offering is a platform-plus-modules architecture rather than a single unified product: the core platforms are the Miller-modified Toyota Land Cruiser (diesel Mining Landcruiser), the battery-electric Landcruiser Electric conversion of that same Land Cruiser platform, the all-new Relay battery electric vehicle (BEV) built around Miller's proprietary Ionic Drive electric drivetrain, and the low-profile Grader (Miller BG 110-M diesel / E-Grader ION 110M electric). Built on the Land Cruiser chassis, a modular set of body-and-attachment modules is offered: Mining Service Trucks (Fuel Service Truck, Lube Truck, Mechanic Truck, Water Tanker), Personnel Carriers (Crew Cab, Personnel Carrier/PC Box, Van Bodies, Side Seating Tray), Mine Rescue Vehicles and ambulances, Elevated Work Platforms (Aerial Boom Lift and forward/side-mounted Scissor Lift), and Explosives Transport (ANFO Truck with Aerial Boom, Bulk Explosives Carrier with Blasting Caps, Explosives Carrier). The vehicles are supported by a Parts & Service business offering genuine parts, in-country technicians, preventative maintenance and rebuilds, so the hardware modules and the service layer together form the full mining mobility offering.
Differentiator
Problem solved
Functional benefit
Brands
- Relay: Flagship next-generation battery electric mine vehicle (BEV) with 43 kWh battery, 100 kW continuous motor output, off-board CCS Type 2 DC fast charging and on-board AC charging, ROPS/FOPS Level 2 protection and a 22-section replaceable tire design.
- Ionic Drive
- E-Grader (ION 110M)
- Miller BG 110-M
Products and services
- Mining Landcruiser (diesel) Core platform for the range: a Miller-modified Toyota Land Cruiser 78-series, 1-tonne diesel utility vehicle engineered for mining above and below ground, with a 6-cylinder 128 HP Toyota diesel engine, 5-speed manual transmission with 2-speed transfer case, ISO-certified ROPS/FOPS Level 1 and 2 canopies, and a wide range of rear attachments plus underground and cold-weather packages. It serves as the base chassis for Miller's service trucks, personnel carriers, rescue vehicles, elevated work platforms and explosives transport vehicles.
- Landcruiser Electric Battery-electric conversion of the Land Cruiser platform built for mines, using a 90 kW / 200 Nm motor, a 46 kWh Li-ion (Samsung INR 18650 29E) battery with dielectric fluid cooling, a planetary gearbox (i = 3.086), a 22 kW on-board AC fast charger and a mobile 22 kW charging box with Bluetooth connection. Dimensionally and operationally matched to the diesel Land Cruiser for fleet integration with minimal driver training, and reported to cut operating expenditure by up to 30%.
- Relay Next-generation battery electric mine vehicle built around Miller's proprietary Ionic Drive electric drivetrain, with a midship dual output motor (100 kW continuous / 170 kW peak), a 43 kWh / 533 VDC battery with fully integrated battery management system, hybrid off-board DC fast and on-board AC charging delivering 10-12 hours of operation from an 18-minute charge, bidirectional telemetry for remote diagnostics and software updates, regenerative braking, ROPS/FOPS Level 2 cabin protection and a 22-section replaceable tyre design. Sold to underground and above-ground mine operators.
- Miller BG 110-M Grader Low-profile underground motor grader, 1.80 m high by 7.40 m long, powered by a Cummins ISF 2.8 engine (110 kW / 148 HP, 300 Nm) with load-sensing hydraulics, fully hydraulic steering, advanced hydrostatic all-wheel drive with 2-gear transmission to 33 km/h and optional 15 km/h limiter, articulated frame steering and a FOPS-approved canopy. Offered in diesel or electric versions.
- E-Grader (ION 110M) Battery electric low-profile grader launched in 2022 for underground mining, the electric counterpart to the diesel BG 110-M grader and part of Miller's electrified underground equipment range for operations requiring low-profile electric machinery.
- Diesel MAX Cummins-powered diesel mining vehicle variant released in 2014, extending Miller's diesel powertrain offering with a higher-output engine for mine duty.
- Electric conversion kits Engineered kits that convert trusted Toyota Land Cruisers into zero-emission battery electric vehicles, sold as a standalone product offering to mining operators transitioning fleets to electric with less maintenance and lower running costs.
- Mining Service Trucks Family of mine-spec support vehicles built on the 1-tonne Land Cruiser platform (6-cylinder 1HZ Toyota engine with 5-speed manual and 2-speed transfer case) with specialised attachments for fueling, lubrication, electrical work, sump services and surveying. Variants include the Fuel Service Truck with customisable tank sizes, the Lube Truck (100-250 L diesel tank and 20-100 L oil tank options), the Mechanic Truck with toolbox, vice mounting, torch tank holders, Hiab crane options, air compressor and hose reels, and the Water Tanker for dust suppression, site cleaning and equipment cooling.
- Personnel Carriers Mine-ready personnel transport vehicles built from Land Cruisers with seating for 2 to 10 passengers, roll bars, ROPS/FOPS Level 1 and 2, emergency exits, gas detection, fire suppression and secondary braking systems. Body options include the Crew Cab (up to 5 occupants with optional 4-seat rear benches and rear material box or flatdeck), the Personnel Carrier / PC Box (up to 6 people on the back plus equipment, with optional folding bench seats to increase equipment payload) and the Side Seating Tray configuration for mines with side-seating regulatory requirements.
- Mine Rescue Vehicles Rescue vehicles and ambulances for underground emergency response, accommodating up to 8 personnel, with advanced suspension, locked hubs, limited-slip differential, and equipped with medical tools, communication systems and protective gear. The rescue-oriented Personnel Carrier / PC Box configuration transports 6-8 people plus driver and front passenger in 7' or 8' steel or aluminium bodies with fixed/folding benches, optional ROPS/FOPS and stretcher carrier options.
- Elevated Work Platforms Custom-modified aerial boom and scissor lift platforms in steel construction with roll bars, ROPS/FOPS Level 1 and 2, hydraulic positioning with 15-degree tilt and a 1-ton load-rated mainframe. Variants include the Aerial Boom Lift (35 ft reach, 300 lb / 136 kg weight capacity) and the hydraulic-driven Scissor Lift in forward or side mounted orientations with 17 ft (2-stage) or 21 ft (3-stage) man reach and a heavy-duty deck.
- Explosives Transport Underground explosives handling vehicles built on a 1-ton load-rated mainframe with ROPS/FOPS Level 2 cabin protection, roll bars, emergency lighting, gas detection, fire suppression and an underground package including back-up alarm, hour meter and exhaust purifier. Variants include the ANFO Truck with Aerial Boom and high-capacity ANFO pot, the Bulk Explosives Carrier with Blasting Caps with a secure front compartment, and the Explosives Carrier for high-pressure explosive loading tasks.
- Parts & Service Aftermarket support business supplying genuine OEM-quality Miller parts, including left- and right-hand drive options from stocked inventory, plus on-site and remote technical support, preventative maintenance programmes, diagnostics and troubleshooting, and equipment rebuilds and upgrades delivered by service and parts teams based in key mining regions.
Quantifiable outcome
- Land Cruiser mine-ready vehicles deliver nearly three times the durability of rival utility brands, lasting up to 4 years in harsh mining conditions
- +7 more outcomes
Companies that use Miller Technology
Customer profileSegments4 records
Ideal customer profiles4 records
Miller Technology technology and API
TechnologyTechnology focussed Yes
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
AI capability3 records
Feature10 records
Miller Technology partnerships and signals
Strategic signalPartnerships
Four partnerships are on record, tiered core — sole engine supplier for the diesel max and grader lines, flagship — the base platform for miller's entire vehicle range, core component supplier for the grader drivetrain and regional — sole listed dealer for the usa market.
- Cumminscore — sole engine supplier for the diesel max and grader linesJoined in 2007 as an engine dealer partner (Cummins Engines Dealer). Cummins power underpins the 2014 Diesel MAX launch and the 2017 Grader launch, and the current BG 110-M underground grader is specified with a Cummins ISF 2.8 engine (110 kW / 148 HP, 300 Nm). Cummins is also shown among Miller's global partner brands.
- Toyotaflagship — the base platform for miller's entire vehicle rangeIn 1989 Miller became a Toyota Landcruiser dealer, and the Toyota Land Cruiser remains the base platform for Miller's mine-ready vehicles. Miller-modified Land Cruisers use the 1HZ six-cylinder Toyota diesel engine (96 kW @ 3800 RPM, 285 Nm @ 2200 RPM) with a 5-speed manual transmission, 2-speed transfer case and optional 3-speed configuration. Toyota also supplies engine and drivetrain content for the Advanced Framed mining support vehicles.
- Danacore component supplier for the grader drivetrainDana is the specified axle supplier for the Miller BG 110-M grader: front and wheel axle DANA with a 212 front axle and 112 rear axle, Rexroth A6VM107 hydraulic steering, two 2-speed manual gearboxes and a 45% no-spin differential. Dana is also displayed among Miller's global partner brands.
- Classic Motors Incregional — sole listed dealer for the usa marketListed dealer for Miller Technology in the USA, located at 120 South Main Street, Richfield, Utah UT 84701-2587. The dealer handles sales (+1 435 633 4865) and parts (+1 435 558 3141) for the US market, extending Miller's direct-sales reach and after-sales support regionally.
Scale indicators10 records
Recent moves7 records
Expansion highlights6 records
Miller Technology competitors and assessment
Company assessmentDirect peers
- Epiroc: Epiroc (formerly Atlas Copco Mining & Construction) is a leading supplier of underground mining equipment, including battery-electric loaders, trucks and utility vehicles, and directly competes for Tier 1 miners' underground fleet electrification budgets that Miller's Relay BEV and E-Grader target.
- Normet: Normet is a Finnish specialist in underground mining equipment — vehicles, personnel carriers, explosives/ANFO trucks and graders — with a comparable focus on low-profile, safety-certified equipment for underground operators.
- Terramac (MineCat): Terramac, an Ontario-based manufacturer, builds MineCat underground compactors, graders, personnel carriers and utility vehicles and has moved into battery-electric versions — an almost identical Canadian product set and customer base to Miller's.
- RDH Mining Equipment: RDH Mining Equipment, a Timmins, Ontario manufacturer, produces underground mining vehicles, LHDs, personnel carriers and drill rigs and also offers conversion/electrification services for existing fleets — overlapping Miller's vehicle and conversion-kit offering.
- Sandvik Mining and Construction: Sandvik Mining and Construction supplies underground and surface mining vehicles and battery-electric equipment to the same Tier 1 mining customers, competing directly for large mine-fleet platform and service contracts.
Broad incumbents
- Caterpillar (Mining, Construction & Resources): Caterpillar is the dominant incumbent in mining equipment with battery-electric underground trucks and loaders plus global dealer and service coverage; it competes for the same mine-fleet wallet on a much broader portfolio basis.
- Liebherr: Liebherr manufactures underground mining trucks, loaders and battery-electric mining equipment and has one of the densest global service networks in the sector, overlapping Miller's underground vehicle and support proposition.
- Toyota: Toyota supplies the Land Cruiser 78-series platform, engines and drivetrain content underpinning Miller's entire mining vehicle range since the 1989 dealer relationship, while also competing as the original OEM for mine-spec utility variants.
Others
- Cummins: Cummins is Miller's engine partner and sole engine supplier for the Diesel MAX and BG 110-M grader (ISF 2.8), making it a key component dependency and an adjacent player in mining powertrain and electrification services.
- JLG Industries: JLG is a leading aerial work platform manufacturer with mine-spec boom and scissor lifts, overlapping the elevated work platform family in Miller's product line while competing far more broadly in access equipment.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat6 records
Key risks7 records
Key highlights7 records
Customer concentration
Miller Technology social profiles
Digital presenceMiller Technology financial estimates
Financial estimateRevenue estimate
Valuation estimate
Miller Technology leadership team
Management profileNumber of profiles
Profiles4 records
Miller Technology funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Miller Technology M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Miller Technology
What does Miller Technology do?
Miller Technology designs, develops and manufactures bespoke mine-spec light utility vehicles at its North Bay, Ontario plant: Miller-modified Toyota Land Cruiser-based diesel and battery-electric utility vehicles, the Relay battery electric vehicle, low-profile underground graders, and a modular family of bodies and attachments covering service trucks, personnel carriers, mine rescue vehicles, elevated work platforms and explosives transport. Each vehicle is configured to the customer's site requirements and sold as a one-time purchase through direct quotes and a small dealer network, with a recurring parts, maintenance, rebuild and on-site/remote support business.
Is Miller Technology a public or private company?
Miller Technology is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was Miller Technology founded?
Miller Technology was founded in 1979. It employs 11 to 50 people.
Where is Miller Technology based?
Miller Technology is headquartered in North Bay, Canada, in the North America region.
How does Miller Technology make money?
Three revenue lines are on record. Vehicle and equipment sales (diesel and electric mining vehicles) is the primary driver. The others are electric conversion kits and parts, service and after-sales support.
Who are Miller Technology's main competitors?
Direct peers on record are Epiroc, Normet, Terramac (MineCat), RDH Mining Equipment and Sandvik Mining and Construction. Broad incumbents are Caterpillar (Mining, Construction & Resources), Liebherr and Toyota. Others are Cummins and JLG Industries.
Does Miller Technology have an API?
No public API is recorded for Miller Technology.
What industry is Miller Technology in?
Miller Technology's product category is Mining Vehicles and Mining Equipment. Its primary akta.pro industry code is IMAHAIAG, Specialty Off-Road Utility Vehicles (UTVs, ATVs, Side-by-Sides), with a secondary code of IMACABAG, Specialty Truck Manufacturing (Fire/Rescue/Military-Commercial/Expedition). Its NAICS code is 33611 and its SIC code is 3713.