What BARplast does

BARplast LLC is a North American specialty distributor focused exclusively on high-performance polymers (HPPs), with particular emphasis on PEEK (Polyetheretherketone) and polyimide variants. Founded in 2020/2021 and headquartered in Katy, Texas (Greater Houston), the company operates as the wholly owned U.S. subsidiary of Hamburg, Germany-based BIEGLO Group. BARplast serves industrial customers in aerospace, automotive, oil and gas, and semiconductor manufacturing, functioning as a technical intermediary between global polymer producers and North American end-users and providing materials selection consulting alongside product supply.

The company's product portfolio spans thermoplastic and thermosetting polyimides — most notably Mitsui Chemicals' AURUM® TPI (highest glass transition temperature among thermoplastics at 245°C) and UBE's UIP® polyimide powders — together with virgin and recycled PEEK compounds (LUVOCOM® EOG from Lehmann&Voss&Co., PFLUON grades, DEXNYL® R-PEEK), complementary resins (PBI, PAI, PEI), and the DEXNYL® proprietary brand from parent BIEGLO. Materials are supplied in granules, powders, and semi-finished forms (rods, sheets, tubes, films). Notably, BARplast holds exclusive North American distribution rights for UBE's polyimide powder portfolio and is an authorized distributor for Mitsui Chemicals' AURUM®; additional supplier relationships include Lehmann&Voss&Co., Daelim (PLAVIS), and Pfluon.

BARplast operates a transaction-based B2B distribution model with quote-based pricing on specialty materials. Its go-to-market combines direct enterprise sales to industrial accounts, proprietary e-commerce storefronts (PEEK-shop.com, POLYIMIDE-shop.com, and BARplast.com), and active participation in industry trade shows including SEMICON West, OTC (Offshore Technology Conference), NPE (The Plastics Show), Coiltech North America, FAKUMA, and K-Show. The team of 1–10 employees is led by President and Managing Director John Biesterfeld (founder of parent BIEGLO Group) and Vice President Miteya Rahane, reflecting a lean but technically credentialed operation executed through channel partnership rather than internal manufacturing.

Name

BARplast

Legal name

BARplast, LLC

Website

https://barplast.com

Company type

Private

Founded year

2021

Operating status

Operating

Headcount range

1–10 employees

Short description

BARplast is a Texas-based specialty polymer distributor and North American subsidiary of Germany's BIEGLO Group, distributing high-performance PEEK and polyimide materials to aerospace, automotive, oil and gas, and semiconductor manufacturers.

Ownership category

akta.pro rank

Product category

High-Performance Polymer Distribution

NAICS

Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing (3252), Plastics Packaging Film and Sheet (including Laminated) Manufacturing (326112)

SIC

Plastic Materials, Synth Resins & Nonvulcan Elastomers (2821), Unsupported Plastics Film & Sheet (3081)

akta.pro primary industry

High-Performance & Specialty Polymers (PPS, LCP, PI/PAI, PAEK) (IMAEANAI)

akta.pro secondary industries

Specialty Polymers & Resins (Engineered Materials) (IMAEABAK), Polymer Compounds & Masterbatches (Compounding, Color/Fill/Additive Concentrates) (IMAEANAJ)

Keywords

• High-performance polymers
• PEEK distribution
• Polyimide materials
• Industrial polymer supply
• Specialty plastics distribution

Headquarters

HQ city

Katy

HQ country

United States

HQ region

North America

Offices2 records

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Supply Chain, Operations, Personnel, Marketing or Sales, Technology or R&D

Revenue model

1. High-Performance Polymer Distribution: BARplast generates revenue through distribution of high-performance polymers including granules, powders, and semi-finished products (rods, tubes, sheets, films) to industrial customers in aerospace, automotive, oil and gas, and semiconductor sectors.

Go-to-market motion2 records

Distribution channels3 records

Marketing channels3 records

Core offering

BARplast distributes high-performance polymers — primarily PEEK and Polyimide (including Mitsui Chemicals' AURUM® TPI and UBE's UIP® polyimide powders) — in granules, powders, and semi-finished forms (rods, tubes, sheets, films) to industrial customers in aerospace, automotive, oil and gas, and semiconductor sectors. The company combines its distribution portfolio with technical consulting to help customers select the suitable HPP material for their specific application, leveraging exclusive and authorized distribution partnerships with global producers.

Product overview

BARplast is a high-performance polymer distributor specializing in PEEK (Polyetheretherketone) and POLYIMIDE materials, operating as a subsidiary of BIEGLO Group headquartered in Hamburg, Germany, with operations in Houston, Texas. The company offers a comprehensive portfolio of granules, powders, and semi-finished forms (rods, tubes, sheets, films, finished parts) from multiple global suppliers. Key products include AURUM™ Thermoplastic Polyimide from Mitsui Chemicals (highest Tg of 245°C among thermoplastics), UIP® Polyimide Powder from UBE (exclusive North American distributor), LUVOCOM® EOG PEEK Compounds from Lehmann&Voss, PLAVIS thermosetting polyimide from Daelim, and DEXNYL® brand products from BIEGLO. The portfolio also includes PBI, PAI, PEI, and R-PEEK (recycled materials). BARplast serves demanding industries including aerospace, automotive, semiconductor, oil and gas, and electrical engineering.

Differentiator

Problem solved

Functional benefit

Brands

• PEEK-shop.com: Online shop for PEEK products and data sheets operated by BARplast
• POLYIMIDE-shop.com

Products and services

• AURUM® Thermoplastic Polyimide (TPI) Thermoplastic polyimide (TPI) granules, powders, and semi-finished products for industrial customers needing the highest temperature resistance and dimensional stability. Distributed under authorized partnership with Mitsui Chemicals for North America.
• UIP® Polyimide Powder (UBE) UBE's polyimide powders designed for extreme-temperature and high-performance applications, offering superior thermal stability (HDT from 680°F to 932°F), very low water absorption, and excellent chemical resistance for semiconductor, electronics, aerospace, and advanced coatings applications.
• LUVOCOM® EOG PEEK Compounds High-performance PEEK compounds from Lehmann&Voss&Co. available in neat, tribological, glass, and carbon fiber reinforced grades; qualified to NORSOK M710 for oil and gas applications; used across automotive, aerospace, electronic, medical, and industrial sectors.
• PLAVIS Thermosetting Polyimide Thermosetting polyimide sheets (12" x 12", thickness 12.7mm to 62mm) and rods (1/4" to 2" diameter, 19.6" length) with continuous operating temperatures up to 350°C, low coefficient of thermal expansion, maximum electrical insulation, and lowest outgassing properties for semiconductor wafer processing.
• DEXNYL® Brand Products BIEGLO brand product line covering rPI-s thermosetting polyimide powder, PI-SF polyimide sheets and rods, Black PEEK Masterbatch, and R-PEEK 143G recycled granules, offering higher wear resistance, lower oil absorption, low thermal conductivity, and economical pricing.
• PFLUON PEEK PEEK granules supplied by Pfluon, available in four grades: Very low, Low and High viscosity, manufactured using modern filtration units and distributed by BARplast.
• R-PEEK (Recycled PEEK) Recycled PEEK granules (DEXNYL® R-PEEK 143G) suitable for producing high-strength and high-temperature molded components via injection molding and extrusion for aerospace, automotive, electrical/electronics, engineering, marine, and chemical sectors.
• PBI (Polybenzimidazole) High-performance thermoplastic polymer with glass transition temperature of 800°F and broad chemical resistance, used in semiconductor industry for retaining rings, screws, feeder rings, wafer handling, wafer spin chucks, furnace ring holders, focus rings, wafer clamps, vacuum pads, and wafer carriers.
• PAI (Polyamide-imide) High-performance polymer offered in BARplast's portfolio for high-temperature and demanding industrial applications such as coil winding electrical insulation.
• PEI (Polyetherimide) High-performance polymer available in BARplast's portfolio and showcased at industry exhibitions (e.g., Coiltech North America 2026) for coil winding and other industrial applications.

Quantifiable outcome

• AURUM® has half the shrinkage factor of PEEK (0.7% vs 1.5-2.0%), producing superior dimensional accuracy in fiber-reinforced grade products
• +2 more outcomes

Segments4 records

Ideal customer profiles4 records

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature5 records

Partnerships

Seven partnerships are on record, tiered minor and core.

• Dover Precision ComponentsminorStrategic or Co-development PartnerBARplast partnered with Dover Precision Components to develop advanced materials for emerging technologies including hydrogen and wind energy applications.
• Mitsui ChemicalscoreTechnology or IntegrationMitsui Chemicals manufactures AURUM™ thermoplastic polyimide, the only polymer with Tg of 245°C. BARplast is an authorized distributor for AURUM™ in North America, offering granules, powder, and semi-finished products.
• BIEGLO GmbHcoreOthersBARplast LLC is a subsidiary of BIEGLO Group, headquartered in Hamburg, Germany. BIEGLO specializes in marketing and sales of High-Performance Polymers in Europe and North America, providing access to global supplier network.
• UBE America Inc.coreChannel Partner/ Reseller/ DistributorExclusive distribution partnership where BARplast LLC serves as the exclusive distributor of UBE's polyimide powder products (UIP®) throughout North America. UBE's polyimides feature heat distortion temperatures (HDT) from 680°F to 932°F with applications above 1000°F.
• Lehmann&Voss&Co.coreTechnology or IntegrationGerman company that developed LUVOCOM® high-performance thermoplastic compounds, including LUVOCOM® EOG PEEK compounds with NORSOK M710 certification for oil and gas applications. BARplast markets these products in the USA.
• DAELIM PLAVIS Co. Ltd.coreTechnology or IntegrationManufacturer of PLAVIS thermosetting polyimide series offering dimensional stability at high temperatures, used in wafer processing and semiconductor applications. BARplast distributes PLAVIS products in North America.
• Dr. BoyminorStrategic or Co-development PartnerGlobal manufacturer of injection molding systems. BIEGLO and BARplast collaborated with Dr. Boy to demonstrate that AURUM™ TPI can be processed on conventional injection molding machines at their application technical center in Neustadt-Fernthal, Germany.

Scale indicators3 records

Recent moves6 records

Expansion highlights5 records

Emerging players

• RTP Company: US-based custom thermoplastic compounder producing specialty PEEK and high-performance polymer compounds, including carbon-fiber reinforced grades. Partial overlap with BARplast's LUVOCOM® EOG and DEXNYL® PEEK compound offerings into similar end markets.

Broad incumbents

• Professional Plastics: Large US-based specialty plastics distributor offering PEEK and other engineering plastics in sheet, rod, and film forms across multiple industries. Broader portfolio and larger sales force than BARplast, but less depth in pure polyimide distribution.
• Curbell Plastics: Major North American distributor of specialty plastic sheet, rod, tube, and film including high-performance polymers. Operates with much larger scale, multiple locations, and broader product breadth than BARplast's focused PEEK/PI offering.
• Victrex: World's leading PEEK resin manufacturer; sells direct and through distributors including into aerospace, automotive, oil & gas, and semiconductor. As a manufacturer, Victrex could bypass BARplast and sell direct to large accounts, or alter its distribution strategy to squeeze out intermediaries.
• Solvay Specialty Polymers: Global specialty polymer manufacturer offering PEEK (KetaSpire), polyimide, and other high-performance resins. As a resin manufacturer with global sales, Solvay competes upstream and could compete downstream by selling direct or restricting supply to distributors like BARplast.
• Ensinger: Global manufacturer and distributor of high-performance engineering plastics including PEEK, PI, and PEI compounds, with North American operations. Competes with BARplast in aerospace and semiconductor, while also offering proprietary compounds and finished machined parts.
• Mitsubishi Chemical Advanced Materials: Major global manufacturer and distributor of high-performance polymer shapes and compounds (formerly Quadrant EPP / Mitsui Chemicals' broader portfolio). Competes directly with BARplast's semi-finished PEEK and PI offerings, particularly in semiconductor and aerospace.

Direct peers

• BIEGLO GmbH: Parent company of BARplast; Hamburg-based distributor of high-performance polymers (PEEK, PI, PBI, PAI, PPA) with the same product portfolio and supplier relationships, serving European customers. Most directly comparable entity, differing only in geographic focus.
• Lehmann&Voss&Co. (LEHVOSS): Hamburg-based specialty compounder and distributor that developed LUVOCOM® EOG PEEK compounds, which BARplast distributes in North America. Operates as both a partner and peer in the European market with similar HPP product focus.
• Drake Plastics: US-based specialty plastics company distributing and machining high-performance polymers including PEEK, PEI, and PPS, serving aerospace, medical, and industrial customers. Closely comparable in product mix and North American customer base, though with in-house machining capabilities.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat3 records

Key risks6 records

Key highlights6 records

Customer concentration

• Xx.com/barplastl
• Facebookfacebook.com/BARplastLLC
• LinkedInlinkedin.com/company/barplast-llc

Revenue estimate

Valuation estimate

Number of profiles

Profiles2 records

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about BARplast