What Betomax Systems does

Betomax Systems GmbH & Co. KG is a privately held German manufacturer of specialized construction components for the concrete construction industry, headquartered in Neuss and operating continuously since 1963/64. The company designs, produces, and sells proprietary hardware systems spanning formwork anchoring (MKK® metal-plastic cones, SKK® steel climbing cones, CLIMAX® anchoring sleeves, K-TEC-3s© concrete screws), reinforcement continuity (COMAX® reverse bend connections, GripTec screw connections, CLIXS® punching shear reinforcement), pipe spreading, construction joint sealing, bridge construction formwork and safety systems, and complementary building materials such as mortars, release agents, and curing compounds. The portfolio is backed by a dense IP footprint of registered trademarks and certified test reports (Prüfberichte, Allgemeine Bauaufsichtliche Zulassung, MPA NRW test certificates) with quantified load values, and is supported by the BETOMAX® Bemessungssoftware engineering dimensioning tool for CLIXS® and COMAX® design.

The company's customer base is organized into three use-case segments: precast concrete plants (primary), bridge construction companies, and general construction firms executing cast-in-place concrete work. Betomax sells exclusively through a direct enterprise field sales organization — field sales representatives, key account managers for precast factories, technical sales for bridge construction, product managers, internal sales, and technical support — covering Germany directly, Austria directly, and additional European markets through a network of distribution partners. Pricing is quotation-based and not publicly disclosed. Revenue is generated from hardware and accessory sales, with no software-as-a-service or licensing revenue stream identified in the source data.

Ownership is structured as a German GmbH & Co. KG (limited partnership) with a general partner GmbH also domiciled in Neuss. The company is led by Managing Director Dipl.-Kfm. Gregor Püttmann, operates independently with no identified parent company or private equity backing, and shows no disclosed funding rounds, M&A activity, or leadership transitions in the available material. The company is currently active, with ongoing product development (COMAX®-X standard types, COMAX® EPD certification) and a public job openings page consistent with continued operational hiring.

Name

Betomax Systems

Legal name

BETOMAX systems GmbH & Co. KG

Website

https://betomax.com

Company type

Private

Founded year

1964

Operating status

Operating

Headcount range

101–250 employees

Short description

Betomax Systems is a privately held German manufacturer of proprietary concrete construction components — formwork anchors, reinforcement connections, bridge construction systems, and sealing products — sold directly to precast concrete plants, bridge builders, and general contractors across Germany, Austria, and partner markets in Europe.

Ownership category

akta.pro rank

Product category

Concrete Construction Hardware

NAICS

Structural Steel and Precast Concrete Contractors (238120), Other Concrete Product Manufacturing (327390)

SIC

Bolts, Nuts, Screws, Rivets & Washers (3452), Gaskets, Packg & Sealg Devices & Rubber & Plastics Hose (3050), Adhesives & Sealants (2891)

akta.pro primary industry

Fasteners, Anchors & Connectors (Bolts, Weld Studs, Plates) (IMADACAJ)

akta.pro secondary industry

Sealants (Construction & Industrial) (IMAEAGAI)

Keywords

• Concrete construction hardware
• Formwork anchoring systems
• Reinforcement connection technology
• Precast concrete accessories
• Bridge construction equipment

Headquarters

HQ city

Neuss

HQ country

Germany

HQ region

Europe

Offices1 record

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Operations, Supply Chain, Personnel, Marketing or Sales, Technology or R&D

Revenue model

1. Construction Hardware and Systems Sales: Revenue generated from the sale of proprietary construction hardware systems and accessories. Products are sold directly to precast concrete manufacturers, construction companies, and bridge builders through a field sales organization. Product categories include formwork systems, anchoring technology, reinforcement technology, pipe spreading technology, bridge construction technology, safety equipment, sealing/waterproofing technology, and building materials.

Go-to-market motion1 record

Distribution channels1 record

Marketing channels5 records

Core offering

Betomax Systems manufactures and supplies proprietary hardware systems and accessories for precast and cast-in-place concrete construction. Its portfolio covers formwork anchors, water-stop and water-stops technology, reinforcement connection systems (COMAX® reverse bend, GripTec screw), punching shear reinforcement (CLIXS®), pipe sealing and spreading systems (FLUPP®), single-sided anchoring solutions (CLIMAX®, K-TEC-3s, K-TEC-MS), bridge cap formwork and fall protection systems, and a range of mortars, spacers and release agents. These engineered products are sold directly to precast concrete producers, bridge construction contractors, and general construction companies through a field sales organization in Germany and Austria with European partner coverage beyond.

Product overview

BETOMAX Systems is a German construction materials company specializing in precast concrete technology, formwork systems, and reinforcement solutions. The company offers a comprehensive portfolio of 11 product categories: Precast Technology (Fertigteiltechnik), Anchor Technology (Ankertechnik), Pipe Spreading Technology (Rohrspreiztechnik), Reinforcement Technology (Bewehrungstechnik), Bridge Construction Technology (Brückenbautechnik), Safety Equipment (Sicherheitstechnik), Construction Joint Technology (Abdichtungstechnik), Formwork System Technology (Schalsystemtechnik), Building Materials Technology (Baustofftechnik), Spacer Technology (Abstandtechnik), and Working Aids (Arbeitshilfen). Key branded products include COMAX® reverse bend connections (now with EPD certification), GripTec screw connections, MKK® metal-plastic cones, SKK® steel climbing cones, CLIXS® punching shear reinforcement with dimensioning software, and various mortar products. The company also provides design software (BETOMAX Bemessungssoftware) for engineering calculations. BETOMAX serves precast factories, bridge construction, and general concrete construction applications primarily in German-speaking markets.

Differentiator

Problem solved

Functional benefit

Brands

• COMAX®: Premium reverse bending reinforcement technology for precast concrete elements
• GripTec
• MKK®
• SKK®
• FLUPP®
• KNACKER®
• DREIHORN®
• CLIXS®
• CLIMAX®
• ECOMAX 2
• K-TEC-3s©
• MULTI-MONTI®

Products and services

• COMAX® Reverse Bend Connections Premium reverse-bend reinforcement connection system (Rückbiegeanschlüsse) for precast and cast-in-place concrete construction, providing reinforcement continuity across joints and is now offered with an Environmental Product Declaration (EPD). Available in standard types including COMAX®-X (shear force parallel and perpendicular to joint) and COMAX®-GTB combination connections. Used by precast plants and construction engineers.
• GripTec Screw Connections Screw connection system for reinforcement bars, including GripTec GTB combination connections used with COMAX®; provides a screwable alternative to reverse-bend reinforcement connections in precast concrete elements.
• MKK® Metal-Plastic Cone Multi-use metal-plastic cone (Metall-Kunststoff-Konus) for concrete formwork anchoring, compatible with Uni-stäben and available in B 15, B 20 and B 26.5 sizes, with MKK® Vario B 15 offering 20° angular compensation; used for repeatable formwork anchoring in precast plants and on construction sites.
• SKK® Steel Climbing Cone Steel climbing cone (Stahl-Kletterkonus) used with BETOMAX 15 anchor rod and M 24 threaded screw, applied where the MKK B 15 is chosen as a lead cone; enables reusable, single-sided anchoring in climbing formwork applications.
• CLIMAX® Anchoring Sleeve Glass fiber-reinforced plastic anchoring sleeve for single-sided anchoring with BETOMAX 15; used in ceiling edge formwork, consoles, scaffolding and single-layer formwork. CLIMAX®-Fifty variant offers 51 mm embedment depth for double-shell precast walls. Working load 35 kN at 85 mm embedment depth in C 20/25 concrete.
• K-TEC-3s© Concrete Screw Reusable concrete screw for single-sided anchoring in existing concrete substrates, combining B 15 formwork anchor thread with self-cutting special thread; supports up to 20 setting operations depending on substrate condition. Characteristic pull-out values 28.9 kN for C 20/25 (MPA NRW test certificate).
• K-TEC-MS Concrete Screw Concrete screw for single-sided anchoring in existing concrete, with characteristic extraction values of 28.9 kN at C 20/25; used as a permanent anchor option in the single-sided anchoring range.
• CLIXS® Punching Shear Reinforcement Punching shear reinforcement system designed for precast factories, paired with Betomax's dimensioning software that lets engineers calculate and design CLIXS®-Durchstanzbewehrung layouts.
• Kobold® M 16 Fixing Component Fixing component with metric M 16 thread, sealed with Stopf 20, embedment depth 60 mm and concrete breakout of 53.8 kN at C 20/25; used for fixing points in concrete construction applications.
• FLUPP® Spacer Tube Seal Seals plastic spacer tubes against pressure water at anchor points and dampens sound transmission at tension points in concrete construction.
• KNACKER® Formwork Removal Tool Tool for releasing complicated or firmly adhering formwork elements, featuring a hardened cover that supports multiple uses; used in formwork system technology on construction sites.
• DREIHORN® Bridging and Covering Strip Bridging and covering strip for formwork joints on ceiling formwork tables; remains anchored in concrete after the pour.
• DREIKA Triangular Strip Triangular strips made of impact-resistant hard PVC with perforated nail flanges, used for breaking corners in formwork and finishing concrete elements.
• KIM-Anker Formwork Stop Distance spacer acting as formwork stop; the corrugated anchor plate is pressed into fresh concrete along the approximate center axis of the later wall.
• Verschlußmörtel Anchor Hole Filler Ready-to-use cement-based dry mix with grain size 0–4 mm for filling cone and anchor holes, exhibiting controlled expansion during binding and high early and final strength with waterproof properties.
• Spezial-Verschlußmörtel Special Mortar Ready-to-use cement-based dry mix with grain size 0–0.32 mm for closing cone and anchor holes and concrete cosmetics; non-shrinking, universally applicable, waterproof.
• Vergußmörtel Grouting Mortar Ready-to-use cement-based dry mix, self-leveling and non-shrinking, used for void-free underfilling of foundation plates, machine frames, concrete precasts, anchors and bridge bearings.
• Starcret-Universalspachtel Concrete Spackle Ready-to-use plastic-modified cement-based dry mix used for repairs, coatings and smoothing of concrete, plaster and mortar; specifically formulated for visible concrete cosmetics indoors and outdoors.
• ECOMAX 2 Release Agent Biodegradable release agent for steel and absorbent formwork such as wood and coated chipboards; can be used up to 100 °C formwork temperature and is free of waxes, paraffins and silicones.
• Curing Compound Concrete curing agent in the form of a milky liquid on synthetic resin basis that creates a transparent film, protecting freshly demolded concrete from premature drying.
• 2-Komponenten-Kleber Two-Component Adhesive Epoxy resin-based two-component adhesive for creating waterproof tension points with FB plugs and visible concrete plugs; available in cartridge and can formats.
• BETOMAX® Dimensioning Software Engineering design and dimensioning software (BETOMAX®-Bemessungssoftware) for engineers to design and calculate Betomax systems, including CLIXS® punching shear reinforcement layouts and COMAX® reverse bend connections in precast and cast-in-place concrete structures.

Quantifiable outcome

• CLIMAX® anchoring sleeve achieves 35kN working load at 85mm embedment depth (C 20/25)
• +2 more outcomes

Segments3 records

Ideal customer profiles3 records

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature10 records

Partnerships

One partnership is on record.

• European PartnersminorChannel Partner/ Reseller/ DistributorBETOMAX maintains a network of European partners for sales and distribution of its products outside of Germany and Austria, where the company has direct sales coverage.

Scale indicators1 record

Recent moves6 records

Expansion highlights5 records

Broad incumbents

• Hilti: Hilti is a global incumbent in anchors, fasteners, and direct-fastening technology for construction. While Hilti's portfolio is broader and trades primarily through a direct contractor sales model, its anchor and screw products (e.g., Hilti HIT, Kwik-Bolt) compete directly with Betomax's K-TEC, MKK, and CLIMAX anchoring systems.
• Würth Group: Würth is a global distributor and manufacturer of fastening and assembly materials, including anchors, screws, and concrete accessories. Its industrial fastener portfolio competes with Betomax's anchor technology products and Würth's distribution reach represents a threat to specialty players in commodity-adjacent SKUs.
• Doka: Doka is a global leader in formwork and scaffolding solutions. While its core offering is formwork systems rather than specialty anchors, Doka increasingly bundles accessories and connectors that overlap with Betomax's Ankertechnik and Schalsystemtechnik categories for cast-in-place and precast construction.
• ULMA Construction: ULMA is a Spanish-headquartered formwork and scaffolding manufacturer with operations across Europe. Its vertical formwork and accessory products compete with Betomax's anchor and formwork systems in bridge and precast applications, positioning ULMA as a broader European incumbent peer.
• PERI Group: PERI is a global formwork and scaffolding manufacturer that competes with Betomax's anchor and formwork technology products in cast-in-place concrete. PERI's broader portfolio and international footprint make it a broad incumbent rather than a direct peer, but the company's accessory range increasingly encroaches on Betomax's niche.

Emerging players

• Peikko Group: Peikko is a Finnish-headquartered manufacturer of steel connections, anchoring systems, and precast concrete connections. Peikko's DELTABEAM, bolted connections, and punching shear reinforcement products overlap with Betomax's COMAX, GripTec, and CLIXS reinforcement systems, particularly in the European precast segment.

Direct peers

• MAX Frank: MAX Frank is a German-headquartered specialist in concrete construction accessories including reinforcement connections, spacers, sealing systems, and formwork technology. Like Betomax, MAX Frank serves precast plants, bridge builders, and general concrete construction with engineered accessories and holds similar building approvals.
• Leviat (Halfen / Jordahl / Plaka): Leviat brings together Halfen, Jordahl, and Plaka — the closest direct competitors to Betomax in concrete anchoring, reinforcement connections, and precast accessories. The product portfolios overlap heavily (anchors, reinforcement continuity, formwork accessories), making Leviat the most directly comparable peer for Betomax's core precast and anchoring business.
• Reuss-Seifert: Reuss-Seifert is a German specialist in concrete construction accessories including formwork anchors, spacers, sealing technology, and reinforcement products. As a fellow Mittelstand specialty manufacturer serving the same DACH precast and construction market, Reuss-Seifert is a closely comparable peer to Betomax.
• fischer Group of Companies: fischer is a German family-owned manufacturer of anchors, screws, and fastening systems for concrete and steel construction. fischer's concrete screw and chemical anchor ranges directly overlap Betomax's anchor technology products (K-TEC-3s, CLIMAX, MKK), and fischer similarly relies on technical approvals (ETA, DIBt) as a regulatory moat.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat5 records

Key risks6 records

Key highlights6 records

Customer concentration

• Facebookfacebook.com/betomax
• LinkedInlinkedin.com/company/betomax
• YouTubeyoutube.com/betomax

Revenue estimate

Valuation estimate

Number of profiles

Profiles3 records

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Betomax Systems