What Tapsi Group does

Tapsi Group is an Indian EPC and turnkey engineering provider headquartered in New Delhi with a manufacturing facility in Greater Noida, operating under two legal entities — Tapsi Engineering Company and Tapsi Infra & Power Private Limited. The firm delivers multi-disciplinary (electrical-mechanical-civil-instrumentation/data-communication/automation) turnkey projects across power generation (coal, lignite, gas, captive/cogeneration, heat recovery), industrial electrification, renewable energy (biomass, waste-to-power, mini/micro hydel, wind, solar), and commercial/institutional building services. Its service portfolio spans concept-to-commissioning EPC, feasibility studies and DPR preparation, Owner's Engineering and Lender's Independent Engineer advisory, residual life assessment and life extension studies (20+ units, 15-210 MW), energy audits, arc flash studies per IEEE 1584-2018, and renovation/modernization of power installations.

The company's core technology combines in-house manufactured products — Power Control Centers, Motor Control Centers, transformers, switchgear up to 4000A/6300A, bus ducts up to 8000A/38kV, PLC/SCADA control panels, cold shrink joints, and power factor correction panels — with engineering capabilities in power system modeling using SKM, EASYPOWER, and ETAP. It supports multi-brand automation stacks including Allen Bradley, Siemens, GE Fanuc, Modicon, Mitsubishi, Omron, and Eaton.

Tapsi monetizes primarily through project-based one-time EPC contracts, hardware sales of electrical products, and professional services for technical advisory and consulting. GTM is enterprise field sales with tender participation and direct relationships with major clients including NTPC, GMR, LANCO, L&T, Tata, Reliance Jio, Indian Oil, ONGC, Hindalco, Jindal Steel, Ambuja Cement, DIAL, NBCC, ICICI Bank, and state electricity boards. The firm is short-listed with the Ministry of New & Renewable Energy (MNRE), Government of India, which is a key credential for renewable energy bidding. Notable past engagements include electrification of 300,000+ sq ft of the Commonwealth Games Village (2010), arc flash and RLA studies across Indian thermal power stations, and 25+ turnkey ash handling plant installations for 15-250 MW plants.

Name

Tapsi Group

Legal name

Tapsi Engineering Company

Website

https://tapsigroup.com

Company type

Private

Operating status

Operating

Headcount range

11–50 employees

Short description

Tapsi Group is an India-based EPC and turnkey engineering company delivering multi-disciplinary electrical, mechanical, civil, instrumentation, and automation solutions for power plants, industrial facilities, infrastructure, and commercial buildings, serving clients such as NTPC, L&T, Tata, and ONGC.

Ownership category

akta.pro rank

Product category

Power Engineering and Electrical EPC Services

NAICS

Switchgear and Switchboard Apparatus Manufacturing (335313), Relay and Industrial Control Manufacturing (335314), Other Measuring and Controlling Device Manufacturing (334519), Electric Power Generation, Transmission and Distribution (2211), Solar Electric Power Generation (221114)

SIC

Switchgear & Switchboard Apparatus (3613), Electrical Industrial Apparatus (3620), Industrial Instruments For Measurement, Display, And Control (3823), Instruments For Meas & Testing Of Electricity & Elec Signals (3825), Cogeneration Services & Small Power Producers (4991)

akta.pro primary industry

Balance-of-Plant (BOP) & Civil Works for Power Plants (EUAEAAAL)

akta.pro secondary industries

Industrial Control Cabinets & Power Distribution (Panels, Switchgear for Automation) (IMAHAHAK), Electrical BOP & Collection Systems (MV/HV Cabling, Switchgear, Protection, Grounding) (EUAMAFAD), SCADA, Controls & Communications Integration (RTU, Fiber, Networking) (EUAEADAD), Protection, Metering & Grid Compliance Systems (Relays, Revenue Metering, PQ) (EUAEADAE), Backup Power & Critical Power Systems (Generators/UPS) (IMAIABAJ), Utility-Scale Power Generation Asset Management (EUAEAMAA)

Keywords

• Power plant EPC services
• Turnkey electrical engineering
• Switchgear manufacturing
• Power distribution equipment
• Renewable energy solutions

Headquarters

HQ city

New Delhi

HQ country

India

HQ region

Asia

Offices2 records

Markets served

GTM type

B2B

Offering type

Services

Cost components

Personnel, Supply Chain, Operations, Infrastructure, Technology or R&D, Marketing or Sales

Revenue model

1. EPC/Turnkey Power Project Contracts: Engineering, Procurement, and Construction (EPC) contracts for power plants, substations, material handling systems, and industrial electrification projects from concept to commissioning
2. Electrical Products and Equipment: Sale of power control centers, transformers, switchgears, bus ducts, cables, automation systems, and electrical components
3. Technical Advisory and Consulting Services: Feasibility studies, DPR preparation, Owner's Engineering Services, Lender's Independent Engineer, technical advisory for power projects

Go-to-market motion1 record

Distribution channels1 record

Marketing channels3 records

Core offering

Tapsi Group is an EPC/turnkey engineering company that delivers multidisciplinary (Electrical-Mechanical-Civil-Instrumentation/Automation) power solutions for power plants, industrial facilities, and building services. The company undertakes complete power projects from concept to commissioning and manufactures a portfolio of electrical products including switchgear, power control centers, motor control centers, transformers, bus ducts, cables, and automation systems. It also provides residual life assessment, arc flash studies, energy efficiency studies, and technical advisory services for the power sector.

Product overview

Tapsi Group is a power solutions and engineering company that provides a comprehensive portfolio of electrical power products and systems. The offering is organized as a unified set of integrated power solutions rather than a modular software platform. Core products include Power Control Centers and Motor Control Centers that manage power distribution, Transformers for voltage conversion, and Bus Ducts/Trunking Systems for conducting power. Supporting products include Medium/Low Voltage Switchgear, Solar Power solutions (rooftop and ground-based), Auto Mains Failure/Load Transfer Panels for backup power, and Cold Shrink Joints/Terminations for cable connections. The portfolio also includes Control & Automation Systems with PLC-based controls (supporting Allen Bradley, Siemens, GE Fanuc, Modicon, Mitsubishi, Omron, and Eaton brands), Power Factor Correction Panels, UPS Systems, and building services products including Illumination Systems, Fire Alarm Systems, CCTV, Building Automation, Data/Telephone Networking, and Earthing/Lightning Protection. The products work together to provide complete turnkey power solutions from generation to distribution for industrial, infrastructural, and building applications.

Differentiator

Problem solved

Functional benefit

Products and services

• EPC / Turnkey Power Plant and Substation Execution Engineering, Procurement, and Construction (EPC) turnkey contracts for coal, lignite, and gas-based power plants, captive/cogeneration plants, substations, material handling systems, and industrial electrification projects from concept to commissioning. Customers include power generation utilities, IPPs, and industrial enterprises.
• Power Control Centers (PCC) Power Control Centers with feeder and supply breakers, starters for motors above 75 KW, and monitoring and control devices for power plant and industrial applications.
• Motor Control Centers (MCC) Modular plug-in motor control center assemblies designed for industrial motor management applications.
• Power and Distribution Transformers Power transformers for various voltage levels used in substations and power distribution systems.
• Power Distribution Boards Metal clad distribution boards housing fuses, moulded case circuit breakers, and ground leakage protection units for distributing electrical power to individual circuits.
• Auto Mains Failure and Load Transfer Panels (ATS) Automatic transfer switch panels that switch power to emergency standby generators during mains power loss, with programmable operational modes.
• Bus Ducts and Trunking Systems Custom bus ducts and trunking systems including isolated phase, segregated phase, non-segregated phase, and sandwich type for power distribution with ratings up to 8000 amps and voltages up to 38kV.
• Medium and Low Voltage Switchgear and Accessories Complete range of switchgears including vacuum and SF6 circuit breakers up to 4000A, air circuit breakers 800-6300A, protective devices, metering products, and soft solid state starters for motors.
• Medium and EHV Cold Shrink Joints and Terminations Rubber/silicone cold shrink terminations and splices for 11/22/33 KV, 66/72.5 KV, and 110/132 KV applications with conductor sizes up to 1200 sq.mm.
• PLC / SCADA Control Panels and Automation Systems Microprocessor-based PLC/SCADA control panels with peripheral supports for computer-based operation, display, and data acquisition; compatible with Allen Bradley, Siemens, GE Fanuc, Modicon, Mitsubishi, Omron, and Eaton.
• HT/LT Power Cables, Wires, and Cabling Accessories Complete range of power cables including HT and LT cables, wires, cable trays (GI/FRP), conduits, trunking, sockets, switches, metal boxes, and distribution boards.
• Illumination Systems (Conventional and LED) Indoor and outdoor illumination systems including LED-based lighting for roads, areas, yards, offices, and industrial applications.
• Chemical and Conventional Earthing and Lightning Protection Systems Earthing systems and lightning protection equipment for industrial and building installations.
• Fire Alarm, CCTV, Building Automation, and Public Address Systems Integrated building safety and automation systems including fire detection, surveillance, building management, and announcement systems.
• UPS Systems (Single Phase and Three Phase) Uninterruptible power supply systems including single phase (700VA-30KVA) and three phase (10-1100KVA) units for power protection.
• Solar Power Solutions (Rooftop and Ground-Based) Solar power solutions including rooftop and ground-based solar installations for renewable energy generation.
• Technical Advisory and Owner's Engineer Services Feasibility studies, DPR preparation, Owner's Engineering Services, Lender's Independent Engineer, and technical advisory for power projects.
• RLA / Life Extension, Energy Audit, and Arc Flash Studies Residual life assessment and life extension studies, energy audit and efficiency improvement studies, arc flash studies and electrical safety audits, short circuit and breaker coordination studies using SKM, EASYPOWER, and ETAP. Arc flash analysis follows IEEE 1584-2018 with mitigation solutions.
• Renewable and Non-Conventional Energy EPC (Biomass, Waste-to-Power, Wind, Mini/Micro Hydel) EPC, feasibility studies, DPR preparation, specification, layout, single line diagrams, schematics, and project management for biomass, waste-to-power, mini/micro hydel, wind, and other renewable power projects.

Quantifiable outcome

• Over 20 RLA/Life Extension studies completed on units 15-210 MW
• +3 more outcomes

Named customers15 records

Segments5 records

Ideal customer profiles5 records

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature5 records

Scale indicators4 records

Recent moves6 records

Expansion highlights4 records

Direct peers

• KEC International: KEC International (an RPG Group company) is one of India's largest power transmission and distribution EPC contractors, executing turnkey substation, electrification, and power infrastructure projects similar to Tapsi's core scope. Comparable on EPC delivery model, target customers (utilities, state electricity boards, private power producers), and multi-disciplinary electrical capability.
• Tata Projects: Tata Projects is a leading Indian EPC company executing power generation, transmission, industrial electrification, and infrastructure turnkey projects. Direct overlap with Tapsi on thermal power plant EPC, captive power, substation, and industrial electrification work for similar enterprise and government customers.
• Kalpataru Projects International: Kalpataru Projects International is a diversified Indian EPC company with significant power transmission and substation business. Direct comparable on turnkey electrical infrastructure execution and target utility/industrial customer base.
• CG Power and Industrial Solutions: CG Power (formerly Crompton Greaves) manufactures transformers, switchgear, and rotating machines and provides turnkey electrical solutions for power and industrial customers. Highly comparable to Tapsi on switchgear/MCC/bus duct manufacturing plus EPC execution.

Emerging players

• Voltamp Transformers: Voltamp Transformers is an Indian manufacturer of power and distribution transformers serving utilities, infrastructure, and industrial customers. Comparable as an emerging mid-sized Indian electrical equipment manufacturer competing for similar enterprise bids, though narrower in product scope than Tapsi.

Broad incumbents

• ABB India: ABB India is a broad incumbent in industrial automation, electrification, and power systems, manufacturing switchgear, PLC/SCADA systems, and protection equipment similar to Tapsi's product portfolio, plus executing large-scale power and industrial projects.
• Larsen & Toubro (L&T) Construction: L&T is India's largest EPC conglomerate with a power and electrical infrastructure division that competes for the same large thermal, captive power, and substation tenders as Tapsi. Functions as a broad incumbent with deeper balance sheet, larger headcount, and broader geographic reach.
• Siemens India: Siemens India provides electrification, automation, and digital solutions across power generation, transmission, and industrial customers. Direct overlap on switchgear, PLC/SCADA (Siemens PLCs), power system studies, and turnkey industrial electrification.
• Bharat Heavy Electricals Limited (BHEL): BHEL is India's dominant state-owned power equipment manufacturer and EPC contractor for thermal, hydro, and increasingly renewable power plants. Competes directly with Tapsi on power plant EPC, switchgear manufacturing, and balance-of-plant works at a much larger scale.
• Schneider Electric India: Schneider Electric India supplies switchgear, motor control, power factor correction, UPS, and industrial automation products that overlap with much of Tapsi's in-house manufactured portfolio. Broad incumbent with global scale and similar Indian industrial customer base.

Market position

Strengths5 records

Weaknesses5 records

Competitive moat4 records

Key risks7 records

Key highlights4 records

Customer concentration

• Facebookfacebook.com/wix
• Xtwitter.com/Wix
• LinkedInlinkedin.com/company/wix-com

Revenue estimate

Valuation estimate

Number of profiles

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Tapsi Group