Antagus Engenharia
Antagus Engenharia is a privately held Brazilian engineering firm in Rio de Janeiro specializing in tank gauging, custody transfer, and oil/water interface detection systems for the oil and gas sector, acting as exclusive representative for Exalon Delft and authorized distributor for Precision Digital and Aquasant.
- Company typePrivate
- Founded1992
- HeadquartersRio de Janeiro, Brazil
- Headcount1–10
- GTM typeB2B
- OfferingServices
What Antagus Engenharia does
Antagus Engenharia is a privately held Brazilian engineering firm headquartered in Rio de Janeiro (Barra da Tijuca) that specializes in tank gauging systems for the oil and gas sector and related custody transfer applications. The company was founded approximately in 1992-1993 and operates with a lean team of 5 employees, serving the entire Brazilian national territory through direct sales. Its core product portfolio is built around three exclusive distribution partnerships: Exalon Delft temperature interfaces (the X62T series — MIT, VT, MIR, MPT) that serve as drop-in replacements for discontinued Honeywell Enraf 862-series transmitters; the Precision Digital family of process meters, displays, and alarm announciators (Trident, ProVu, Loop Leaders, ProtEX, ProtEX MAX, Helios, VantageView, ConsoliDator, Sabre, Nova, Survivor, PDW Wireless, Vigilante II, MINUMUX II); and Aquasant-MT impedance-based automatic drainage and oil/water interface detection systems.
Underlying technologies include non-intrusive ultrasonic sonar level measurement (installed on tank bottom plates, achieving 0.1% accuracy and unaffected by gas or product clouds), impedance-based water-oil interface detection (Bar probe and Ring probe with MIQ electronic control unit for automatic drainage), and multi-segment capacitance sensors with multi-point PT-100 temperature measurement for custody transfer uncertainty below 1 mm. The X62T interfaces are ATEX-certified for Zone 0/Zone 1 hazardous-area installations, addressing the regulatory requirements of Brazilian refineries and terminals.
Antagus generates revenue through three streams: hardware sales (tank gauging instruments, temperature interfaces, ultrasonic level meters, alarm announciators, and automatic drainage systems sourced from represented manufacturers), technical services (project design, installation, start-up, commissioning, testing, and training), and maintenance and repair services (preventive and corrective maintenance for Enraf and SAAB level gauges, electronic module recovery, technical support, and 24/7 emergency maintenance contracts). The company is also an authorized service provider for Honeywell Enraf and Emerson Rosemount SAAB radar systems (REX2900, REX3900, REX PRO, RAPTOR5900), enabling calibration, integration, and training services for custody transfer applications. Pricing is contact-based with no public disclosure, and go-to-market is direct sales-led with no online commerce presence.
Antagus Engenharia firmographics
Firmographics- Name
- Antagus Engenharia
- Legal name
- Antagus Engenharia
- Website
- https://antagus.com.br
- Company type
- Private
- Founded year
- 1992
- Operating status
- Operating
- Headcount range
- 1–10 employees
- Short description
- Antagus Engenharia is a privately held Brazilian engineering firm in Rio de Janeiro specializing in tank gauging, custody transfer, and oil/water interface detection systems for the oil and gas sector, acting as exclusive representative for Exalon Delft and authorized distributor for Precision Digital and Aquasant.
- Ownership category
- akta.pro rank
Antagus Engenharia industry classification
Industry- Product category
- Industrial Tank Gauging Instrumentation
- NAICS
- Oil and Gas Field Machinery and Equipment Manufacturing (333132), Totalizing Fluid Meter and Counting Device Manufacturing (334514)
- SIC
- Oil & Gas Field Machinery & Equipment (3533), Totalizing Fluid Meters & Counting Devices (3824)
- akta.pro primary industry
- Production Services & Artificial Lift (ESP, Rod Lift, Gas Lift, Chemicals) (EUALABAH)
- akta.pro secondary industries
- Field Treating & Separation (Heater Treaters, Separators, LACT) (EUALACAI), Controls, Monitoring & Condition Management (for Pumps/Compressors) (IMAHANAI)
Keywords
Where Antagus Engenharia is headquartered
LocationHeadquarters
- HQ city
- Rio de Janeiro
- HQ country
- Brazil
- HQ region
- Latin America
Offices1 record
Markets served
Antagus Engenharia business model
Business model- GTM type
- B2B
- Offering type
- Services
- Cost components
- Personnel, Operations, Marketing or Sales, Technology or R&D, Infrastructure
Revenue model
- Equipment sales: Sale of tank gauging instruments, temperature interfaces, displays, ultrasonic level meters, alarm announciators, automatic drainage systems, and related equipment from represented manufacturers (Precision Digital, Aquasant, Exalon Delft).
- Technical services: Project design, installation, start-up, commissioning, testing, and training services for tank gauging systems, alarm systems, and automatic drainage systems.
- Maintenance and repair services: Preventive and corrective maintenance services for Enraf and SAAB level gauges, electronic module recovery, technical support, and 24/7 emergency maintenance contracts.
Go-to-market motion1 record
Distribution channels1 record
Marketing channels2 records
Antagus Engenharia product offering
Product offeringCore offering
Antagus Engenharia distributes and services industrial tank gauging instrumentation for the Brazilian oil & gas and process industries, acting as exclusive Brazilian representative for Exalon Delft temperature interfaces, distributor of Precision Digital process meters and alarm announciators, and representative of Aquasant Measuring Technique automatic drainage systems. The company also delivers engineering services — design, installation, start-up, commissioning, testing, training, and preventive/corrective maintenance — for Honeywell Enraf and Emerson Rosemount SAAB tank gauging platforms used in custody transfer, inventory control, and overflow protection applications.
Product overview
Antagus Engenharia is a technology distributor and service provider for the oil & gas and tank gauging industry in Brazil. The company operates as a portfolio of branded hardware products and specialized services. The core product lines include: (1) Temperature interfaces from Exalon Delft (X62T series - MIT, VT, MIR, MPT) that serve as replacement units for discontinued Honeywell-Enraf temperature transmitters; (2) A comprehensive range of process meters and displays from Precision Digital (Trident, ProVu, Loop Leaders, ProtEX, ProtEX MAX, Helios, VantageView, PDW Wireless, ConsoliDator, Sabre, Javelin D, Nova, Survivor, Vigilante II, MINUMUX II) covering level, pressure, temperature, flow, batch control, and alarm applications; (3) Aquasant-MT automatic drainage and impedance measurement systems for oil/water interface detection; (4) Non-intrusive ultrasonic level meters using sonar technology. These products are complemented by specialized services including ENRAF tank gauging maintenance, Scully alarm system services, and Precision Digital announciator technical support. The company also offers training programs for tank gauging systems and serves as exclusive representative for Exalon Delft and distributor for Precision Digital and Aquasant in Brazil.
Differentiator
Problem solved
Functional benefit
Products and services
- X62T-MIT Temperature Interface Universal temperature interface that replaces the discontinued Honeywell-Enraf 862 MIT protocol, allowing universal temperature sensors to connect to any level gauge. ATEX certified for Zone 0/Zone 1.
- X62T-VT Temperature Interface Temperature interface compatible with Honeywell-Enraf 762 VITO protocol, supporting 4 models in 1 device — compatible with MTT 9-point and 16-point sensors with or without water interface measurement.
- X62T-MIR Temperature Interface Temperature interface that replaces the discontinued Honeywell-Enraf 862 MIR protocol, compatible with Enraf 864 MRT and PT-100 sensors.
- X62T-MPT Temperature Interface Temperature interface replacing single-point multiple PT100 measurement (MPT) for 864 MTT or 764 VITO MTT sensor replacement applications.
- Non-intrusive Ultrasonic Level Meter Non-intrusive ultrasonic sonar level meter installed on the bottom plate of storage tanks with 0.1% accuracy, unaffected by gas or liquefied product clouds. Supports 4-20mA, RS-485, Bluetooth, HART, and MODBUS outputs.
- Aquasant-MT Automatic Tank Drainage System Automatic tank drainage control system using Aquasant MT impedance technology for oil/water separation. Includes Bar Probe interface sensor, Ring Probe impedance sensor, and Mipromex MIQ electronic control unit. ATEX certified for classified areas.
- MMP-3100 Gas — Complete Custody Solution for LPG Inventory Tank inventory custody solution for LPG (GLP) plants. The MMP-3100 Gas from GSI provides level, interface, and temperature measurements with optional density or vapor pressure using multi-segment capacitor sensors achieving better than 1mm uncertainty.
- Precision Digital Trident Process Meter Precision Digital process meter for level, pressure, process, pump control, and temperature applications with intrinsically safe design, LED display with sunlight option, and Modbus communication.
- Precision Digital ProVu Process Meter Precision Digital process meter supporting level, pressure, temperature, flow/totalizer, batch control, speed, high current, high voltage, strain gauge, weight and Modbus applications.
- Precision Digital Loop Leaders Process Meter Loop-powered process meter with intrinsically safe design for alarm, level, pressure, process, pump control, flow/totalizer and weight applications.
- Precision Digital ProtEX Explosion-Proof Process Meter Explosion-proof process meter from Precision Digital with Modbus scanner capability for multiple tank level displays and flow meter integration.
- Precision Digital ProtEX MAX Explosion-Proof Process Meter Explosion-proof process meter with advanced features including batch control, multi-pump alternation, strain gauge, weight and Modbus communication.
- Precision Digital Helios Large-Display LED Process Meter Large-display LED process meter viewable from 30 meters for level, pressure, temperature, process, multi-pump control, flow/totalizer, batch control, speed, strain, weight, high voltage and current applications.
- Precision Digital VantageView Process Meter Loop-powered or battery-powered process meter with SafeTouch programming through glass, explosion-proof design for level, pressure, process, flow/totalizer, batch control and Modbus applications.
- Precision Digital PDW Wireless Bridge Application Wireless bridge and signal repeater supporting up to 32 field units with expansion modules. Transmits up to 1.6km line-of-sight and replaces signal cables in point-to-multipoint configurations.
- Precision Digital ConsoliDator Process Console Precision Digital console for level, pressure, process, flow/totalizer, pump control and Modbus. Features large LCD display with 4/8 lines and 4/8 simultaneous graphical bars.
- Precision Digital Sabre Process Meter Precision Digital process meter for level, pressure, process and temperature applications with multiple input options including 0-10V, PT100, thermocouple and 4-20mA.
- Precision Digital Javelin D High Voltage Process Meter High voltage process meter (0-300V) with LED display for industrial applications. Supports relay outputs, 4-20mA and Modbus communication.
- Precision Digital Nova Process and Temperature Meter Precision Digital process and temperature meter with multi-monitoring software for remote setpoint control, data acquisition and simultaneous monitoring. Available in 1/16, 3/16, 1/8 and 1/4 DIN sizes.
- Precision Digital Survivor NEMA 4X Process Meter NEMA 4X, IP66 rated process meter for level, pressure and process applications with 24 VDC power supply and 4-20mA input.
- Precision Digital Vigilante II Alarm Announciator Alarm announciator for level, pressure and process applications. Available in explosion-proof cabinet option with relay outputs and 24 VDC secondary power supply.
- Precision Digital MINUMUX II Multi-Channel Alarm Announciator Multi-channel alarm announciator with 4 or 8 alarm points for monitoring level, pressure, process and temperature. Features Modbus RTU communication and intrinsically safe design.
- Honeywell Enraf Tank Gauging Engineering Services Specialized engineering services for Honeywell Enraf instruments including electronic board repair, preventive and corrective maintenance, calibration, start-up and commissioning, factory and field acceptance testing, and certified training for custody transfer and tank inventory control systems. Covers Enraf 854 ATG/854 XTG, 811 platform, and radar systems.
- Precision Digital Alarm Announciator Technical Services Technical support services for Precision Digital alarm announciator systems including project support, commissioning, start-up, integration, factory and field acceptance testing, and preventive maintenance contracts.
- Scully High Level Alarm System Services Services for Scully high level alarm systems including rod adjustment, panel integration, corrective maintenance, sensor cleaning, and board repair with exchange base.
- Tank Gauging Training Programs Certified training programs covering tank inventory control systems and custody transfer measurement for Honeywell Enraf and related tank gauging platforms. Delivered by a Honeywell ENRAF certified instructor.
- Emerson Rosemount SAAB Radar Tank Gauging Services Authorized service for Emerson Rosemount SAAB radar systems (REX2900, REX3900, REX PRO, RAPTOR5900) including calibration, maintenance, integration, and training services for custody transfer applications.
Quantifiable outcome
- Impedance measurement provides better than 1mm uncertainty for inventory control
- +1 more outcomes
Companies that use Antagus Engenharia
Customer profileSegments2 records
Ideal customer profiles2 records
Antagus Engenharia technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature4 records
Antagus Engenharia partnerships and signals
Strategic signalPartnerships
Five partnerships are on record, tiered core and flagship.
- Precision DigitalcoreAuthorized distributor of Precision Digital products in Brazil offering complete range of displays, process meters, alarm announciators (Vigilante II, MINUMUX II), and instrument series (Trident, ProVu, Loop Leaders, ProtEX, Helios, VantageView, PDW, ConsoliDator, Sabre, Javelin D, Nova, Survivor) for classified and non-classified areas.
- Aquasant Measuring TechniquecoreAuthorized representatives of Aquasant Measuring Technique in Brazil, offering automatic tank drainage systems, leak detection systems, and high-level alarm systems including the MIQ electronic control unit, Bar probe interface sensor, and Ring probe impedance sensor.
- Exalon DelftflagshipExclusive representatives of Exalon Delft in Brazil, providing X62T temperature interface series (X62T-MIT, X62T-MIR, X62T-VT, X62T-MPT) as replacement solutions for discontinued Honeywell Enraf 862 MIT and 862 MIR interfaces, with ATEX certification for hazardous areas.
- Honeywell EnrafcoreAuthorized service provider for Honeywell Enraf tank gauging systems including 854 ATG/854 XTG platforms, 811 platform, and radar systems. Provides calibration, maintenance, start-up, and training services with certified technicians.
- Emerson Rosemount SAABcoreAuthorized service provider for Emerson Rosemount SAAB radar systems (REX2900, REX3900, REX PRO, and RAPTOR5900) including calibration, maintenance, integration, and training services for custody transfer applications.
Scale indicators1 record
Recent moves6 records
Expansion highlights4 records
Antagus Engenharia competitors and assessment
Company assessmentBroad incumbents
- Honeywell Enraf: OEM of the Enraf tank gauging platform (854 ATG/XTG, 811, VITO). Antagus is an authorized service provider and training partner; Honeywell sells direct in Brazil on new builds and competes head-to-head on modernization programs.
- Endress+Hauser: Global leader in level, flow, and tank gauging instrumentation with strong Brazilian presence. Directly competes with Antagus-supplied technologies on radar/ultrasonic level measurement and custody transfer for O&G and chemical terminals.
- Siemens Brasil: Offers SITRANS level and weighing instrumentation and broader industrial automation; participates in Brazilian O&G tank gauging projects as both a competitor and systems integrator.
- Yokogawa Brasil: Provides tank gauging, DCS integration, and custody transfer solutions to Brazilian refineries and terminals. Competes for the same enterprise O&G instrumentation and modernization contracts.
- ABB Brasil: Supplies instrumentation, analytical, and automation solutions to Brazilian oil, gas, and petrochemical customers, including tank gauging and level measurement competing for the same enterprise spend.
- Emerson Rosemount (Brazil): Emerson owns the Rosemount/SAAB tank gauging line (REX2900, REX3900, RAPTOR5900) that Antagus services as an authorized provider. Emerson sells direct and competes for the same Brazilian O&G custody-transfer and tank inventory modernization projects.
Direct peers
- WIKA Brasil: Manufactures level, temperature, and pressure instrumentation, including tank gauging accessories and thermometers sold into the same Brazilian O&G and chemical storage market Antagus serves.
- KROHNE: Manufacturer of level meters, custody transfer systems, and interface detection devices used in tank farms and O&G terminals; competes with the Aquasant drainage systems and Exalon Delft interfaces that Antagus distributes in Brazil.
- VEGA Brasil: Specialist in level and pressure measurement for O&G and chemical storage tanks; offers radar and ultrasonic instrumentation similar to Antagus's portfolio and targets the same Brazilian terminals and refineries.
Emerging players
- Precision Digital Corporation: US-based manufacturer of process meters, displays, alarm announciators (Vigilante II, MINUMUX II, Trident, ProVu, ProtEX) that Antagus distributes under authorization in Brazil. Comparable mid-market instrumentation portfolio.
Market position
Strengths4 records
Weaknesses5 records
Competitive moat4 records
Key risks5 records
Key highlights6 records
Customer concentration
Antagus Engenharia social profiles
Digital presenceAntagus Engenharia compliance and trust
Trust signalCompliance4 records
Antagus Engenharia financial estimates
Financial estimateRevenue estimate
Valuation estimate
Antagus Engenharia leadership team
Management profileNumber of profiles
Profiles1 record
Antagus Engenharia funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Antagus Engenharia M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Antagus Engenharia
What does Antagus Engenharia do?
Antagus Engenharia distributes and services industrial tank gauging instrumentation for the Brazilian oil & gas and process industries, acting as exclusive Brazilian representative for Exalon Delft temperature interfaces, distributor of Precision Digital process meters and alarm announciators, and representative of Aquasant Measuring Technique automatic drainage systems. The company also delivers engineering services — design, installation, start-up, commissioning, testing, training, and preventive/corrective maintenance — for Honeywell Enraf and Emerson Rosemount SAAB tank gauging platforms used in custody transfer, inventory control, and overflow protection applications.
Is Antagus Engenharia a public or private company?
Antagus Engenharia is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was Antagus Engenharia founded?
Antagus Engenharia was founded in 1992. It employs 1 to 10 people.
Where is Antagus Engenharia based?
Antagus Engenharia is headquartered in Rio de Janeiro, Brazil, in the Latin America region.
How does Antagus Engenharia make money?
Three revenue lines are on record. Equipment sales are the primary driver. The others are technical services and maintenance and repair services.
Who are Antagus Engenharia's main competitors?
Broad incumbents on record are Honeywell Enraf, Endress+Hauser, Siemens Brasil, Yokogawa Brasil, ABB Brasil and Emerson Rosemount (Brazil). Direct peers are WIKA Brasil, KROHNE and VEGA Brasil. Precision Digital Corporation is listed as an emerging player.
Does Antagus Engenharia have an API?
No public API is recorded for Antagus Engenharia.
What industry is Antagus Engenharia in?
Antagus Engenharia's product category is Industrial Tank Gauging Instrumentation. Its primary akta.pro industry code is EUALABAH, Production Services & Artificial Lift (ESP, Rod Lift, Gas Lift, Chemicals), with a secondary code of EUALACAI, Field Treating & Separation (Heater Treaters, Separators, LACT). Its NAICS code is 333132 and its SIC code is 3533.