Betonmortel Centrale Koudekerk (BCK)

What Betonmortel Centrale Koudekerk (BCK) does

Betonmortel Centrale Koudekerk (BCK), founded in 1956 and headquartered in Koudekerk aan den Rijn, Netherlands, is a privately held producer of ready-mixed concrete mortar and flowing screeds serving the Green Heart region of South Holland. The company operates 3 mixing installations across 2 production facilities and runs a fleet of 22 Euro-6 compliant concrete mixers, supporting both gravel-containing and gravel-free product lines with the ability to double capacity on a single product when needed. Its product portfolio spans standard and specialized concrete mortels (lightweight, heavyweight, floor, edge, fiber-reinforced, colored, cold-cast, joint-fill, liquid-tight, self-compacting), flowing screeds (including the proprietary Eco2Floor line using GGBS as binder for near-zero production CO2), and ancillary products such as foamed concrete, grout mortar, and stabilized sand, alongside services covering pumping, pouring, finishing, laboratory testing, and bulk transport.

BCK is a subsidiary of LABEKO BV, which was acquired by AGAR Holding BV in January 2023, embedding BCK within a national network of Dutch concrete plants plus affiliated UK and German operations. Revenue is generated primarily through one-time product sales on a quote-based pricing model with variable fuel and low-water (Rhine level) surcharges, supplemented by professional service fees for pumping, pouring, laboratory, and transport. The customer base is horizontal: professional contractors across residential, commercial, infrastructure, and agricultural segments represent the primary revenue stream, while private individuals anchor a long tail of small-volume residential work (from 1 m3 upward). Distribution is fully direct via the owned mixer fleet within the regional service area.

Name

Betonmortel Centrale Koudekerk (BCK)

Legal name

BV Betonmortel Centrale Koudekerk

Website

https://bck.nl

Company type

Private

Founded year

1956

Operating status

Operating

Headcount range

1–10 employees

Short description

Betonmortel Centrale Koudekerk (BCK) is a Dutch ready-mix concrete mortar and flowing screed producer founded in 1956, operating 3 mixing installations and a 22-mixer Euro-6 fleet to serve contractors and private individuals in the Green Heart region of South Holland.

Ownership category

akta.pro rank

Product category

Ready-Mixed Concrete Manufacturing

NAICS

Ready-Mix Concrete Manufacturing (32732), Cement and Concrete Product Manufacturing (3273), Other Concrete Product Manufacturing (327390)

SIC

Concrete, Gypsum & Plaster Products (3270), Concrete Products, Except Block & Brick (3272)

akta.pro primary industry

Ready-Mix Concrete Production & Delivery (IMADAAAA)

Keywords

• Ready-mixed concrete
• Concrete mortar production
• Flowing screed mortars
• Concrete pumping services
• Construction materials supply

Headquarters

HQ city

Koudekerk aan den Rijn

HQ country

Netherlands

HQ region

Europe

Offices1 record

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Supply Chain, Operations, Personnel, Infrastructure, Technology or R&D, Marketing or Sales

Revenue model

1. Concrete Mortel Sales: Sale of ready-mixed concrete mortar in various specifications including normal, lightweight, heavyweight, floor, berm, stamp, fiber, colored, cold pour, joint fill, liquid-tight, and self-compacting concrete.
2. Flowing Screed (Gietdekvloermortel): Sale of cement-bound and calcium sulphate bound flowing screed products including Eco2Floor and anhydrite floor systems.
3. Related Products: Sale of additional products including flowing species, foamed concrete, floor species, stabilized sand, grout mortar, and concrete blocks.
4. Concrete Services: Services including concrete pumping, concrete pouring, transport of sand, gravel and cement in bulk, and laboratory testing services.

Pricing tiers

Go-to-market motion1 record

Distribution channels3 records

Marketing channels4 records

Core offering

BCK produces and delivers KOMO-certified ready-mixed concrete mortars (Normaalbeton, Lichtbeton, Zwaarbeton, Vezelbeton, Zelfverdichtend Beton, etc.) and flowing screed mortars (Gietdekvloermortel, Eco2Floor, Anhydrietvloer) from its central location in Koudekerk aan den Rijn. The company operates 3 mixing installations across 2 production facilities, supported by a 22-truck Euro-6 fleet and full-service offerings including concrete pumping, pouring, laboratory testing, and transportation. Products range from 1 m3 to over 10,000 m3, serving contractors and private individuals across the Green Heart region of South Holland.

Product overview

Betonmortel Centrale Koudekerk (BCK) is a concrete and mortar production company offering a diversified portfolio of specialized products organized into two main categories: concrete mortels (Betonmortel) and poured screed mortars (Gietdekvloermortels), supplemented by ancillary construction products and services. The core concrete product line includes standard and specialized variants such as Normaalbeton, Lichtbeton (lightweight), Zwaarbeton (heavy), Vloerenbeton (floor), Bermbeton (edge), Stampbeton (tamped), Vezelbeton (fiber-reinforced), Gekleurd Beton (colored), Koude Gietbouw (cold casting), and technical grades like Vloeistofdicht Beton (liquid-tight) and Zelfverdichtend Beton (self-compacting). The gietdekvloermortel line features standard screed as well as Eco2Floor (GGBS-based sustainable alternative) and Anhydrietvloer (calcium sulfate). Ancillary products include Vloerenspecie, Gestabiliseerd zand/Stelspecie, Vloeispecie, Groutmortel, Schuimbeton, and Betonblokken. BCK operates three mixing installations across two production facilities and provides supporting services including concrete pumping (boom, line, mixer, and hose pumps), concrete pouring, laboratory testing, and transportation with a fleet of 22 concrete mixers. The company is part of LABEKO BV under AGAR Holding BV.

Differentiator

Problem solved

Functional benefit

Brands

• Eco2Floor: A cement-bound cast floor screed made from ground granulated blast furnace slag (GGBS), a residual product from the steel industry. Eco2Floor is an environmentally friendly and sustainable screed with near-zero CO2 emissions in production. It combines the advantages of traditional sand-cement screeds with the ease of application of gypsum-bound (anhydrite) cast floor screeds.

Products and services

• Betonmortel (Concrete Mortar) Standard and specialized concrete mortar products conforming to NEN-EN 206-1 and NEN 8005 standards, available in various strength classes, environmental classes, and consistency classes. Includes standard Normaalbeton, plus specialized variants such as Lichtbeton (lightweight), Zwaarbeton (heavyweight), Vloerenbeton (floor), Bermbeton (edge), Stampbeton (tamped), Vezelbeton (fiber-reinforced), Gekleurd Beton (colored), Koude Gietbouw (cold casting), Vloeistofdicht Beton (liquid-tight), Zelfverdichtend Beton (self-compacting), and Beton op Samenstelling (custom composition). Designed for residential, commercial, infrastructure, and agricultural applications.
• Gietdekvloermortel (Flowing Screed Mortar) Cement-bound flowing screed mortar suitable for projects from 10 m2 to 10,000 m2 or more. Offers advantages over traditional sand-cement screed including easier application, high flatness, and improved heat transfer for underfloor heating. BCK became one of the first producers of cast floor screed mortars (Anhydrietvloeren) in the Netherlands in the early 1990s.
• Eco2Floor Sustainable cement-bound flowing screed using ground granulated blast furnace slag (GGBS) as binder instead of traditional cement, resulting in near-zero CO2 emissions during production. Combines advantages of traditional sand-cement screeds with ease of application of gypsum-bound (anhydrite) cast floor screeds. Suitable for underfloor heating and wet areas. Up to 1,000 m2 can be laid per day.
• Anhydrietvloer (Calcium Sulfate-Bound Flowing Floor) Calcium sulfate-bound poured floor using anhydrite as binder, producing a fluid, pumpable screed with minimal physical strain for floor layers. Properties calibrated per CUR-Aanbeveling 107.
• Betonblokken (Concrete Blocks) Concrete blocks for creating temporary storage compartments, available in two sizes: large blocks (160x80x40cm, ~1200 kg) and half blocks (80x80x40cm, ~600 kg). Stackable on suitable surface.
• Schuimbeton (Foamed Concrete) High-quality base product foamed using a special mortar pump, with a separate production unit capable of any desired composition and quantity.
• Gestabiliseerd Zand / Stelspecie (Stabilized Sand) Stabilization sand consisting of aggregates (up to 4mm) and binders in various ratios, primarily used in road construction for stability under paving. Can be produced with over 90% recycled materials.
• Groutmortel (Grout Mortar) Cement and water mixture for injection into soil to stabilize ground or obtain foundation. Grout mixtures available in many compositions and typically assembled according to processor specifications.
• Betonpompen (Concrete Pumping Service) Concrete pumping services with various pump types: boom pumps (28-62 meter), line pumps, mixer pumps (7m3 capacity with 17m boom), and hose pumps (over 100m distance for sprayed concrete). Processing speeds up to 160 m3/hour. Ergonomic, employer-friendly system for delivering concrete to any desired location.
• Betonstorten (Concrete Pouring Service) Complete concrete pouring services from reinforcement to pump and from formwork to finishing, offering full turnkey service for foundations, floors, and walls.
• Laboratorium (Laboratory Testing Service) Quality testing and concrete technology services including cube compressive strength tests, compressive strength development predictions, and mortar composition advisory. Features modern laboratory and continuously trained staff.
• Transporten (Transportation Service) Transportation services for delivering various types of sand, gravel, and bulk cement using 22 concrete mixers, including transport of aggregates and cement to production location.

Quantifiable outcome

• Energy consumption reduced by more than 25% from initial 10-year target
• +3 more outcomes

Named customers2 records

Segments2 records

Ideal customer profiles2 records

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature3 records

Partnerships

Four partnerships are on record, tiered core and minor.

• ENBO (Eerste Nederlandse Bulkoverslag)coreStrategic or Co-development PartnerENBO is a sister company under LABEKO BV, specializing in international bulk loading of powdery substances like lime and cement using mobile installations. Founded in 1954, ENBO operates both nationally and internationally with various mobile installations and loading ships.
• Betoncentrale Twenthe, Betoncentrale Drenthe, Betoncentrale Nederrijn, Betoncentrale Eemsmond, Betoncentrale DiamantminorOthersCompanies within AGAR Holding BV network; together they provide a total package of products and services in concrete mortar, dry mortar, concrete products, cement, sand and gravel throughout the Netherlands.
• BetonhuiscoreStrategic or Co-development PartnerDutch umbrella organization for the concrete industry with 200 member companies. BCK participates in knowledge sharing and collaboration within the concrete industry through this membership.
• European Seaports (locations for ENBO)minorOthersENBO operates at various European seaports performing mobile unloading of cement and similar powdery substances.

Scale indicators8 records

Recent moves4 records

Expansion highlights5 records

Broad incumbents

• Holcim: Global leader in cement, aggregates, and ready-mix concrete with a presence in the Netherlands. Competes with BCK as a broad incumbent offering lower-carbon concrete solutions at scale, with potential to undercut regional players on procurement and price.
• Heidelberg Materials: One of the world's largest building materials groups, with Dutch ready-mix concrete operations (including Dyckerhoff Basal) and integrated cement and aggregates supply. Competes broadly with BCK in the Dutch concrete market with greater scale and vertical integration.

Direct peers

• Bruil: Bruil is a Dutch producer of concrete and mortar products operating batching plants and quarries across the Netherlands. It directly competes with BCK on ready-mix concrete supply to construction and infrastructure projects, with comparable product breadth and customer segments.
• Mebin: Mebin is one of the largest independent ready-mix concrete producers in the Netherlands, operating multiple batching plants across the country. It directly competes with BCK in concrete mortar supply to contractors and construction companies, with a similar product portfolio and customer base.
• Betoncentrale Drenthe: Sister company under AGAR Holding BV producing ready-mixed concrete mortar in the Drenthe region. Operates the same concrete mortar business model as BCK and shares resources, purchasing, and best practices within the AGAR group.
• Betoncentrale Nederrijn: Sister company under AGAR Holding BV serving the Nederrijn area with ready-mixed concrete mortar. Direct operational peer to BCK within the same holding company structure.
• Betoncentrale Diamant: Sister company under AGAR Holding BV producing ready-mixed concrete mortar under the Diamant Beton brand. Operates the same core business model as BCK within the holding's national network.
• Betoncentrale Twenthe: Sister company under AGAR Holding BV (alongside BCK). It produces and delivers ready-mixed concrete mortar in the Twente region of eastern Netherlands, sharing the same holding structure, business model, and product range as BCK.
• Remix Droge Mortel: Sister company under AGAR Holding BV specializing in dry mortar products. It is directly comparable as an adjacent mortar producer within the AGAR portfolio, sharing procurement, distribution, and sustainability practices with BCK.

Regional players

• Dyckerhoff Basal: Dutch ready-mix concrete producer now part of Heidelberg Materials, serving regional markets across the Netherlands. Comparable business model and product line to BCK, but owned by a major international cement and aggregates group.

Market position

Strengths4 records

Weaknesses4 records

Competitive moat4 records

Key risks6 records

Key highlights7 records

Customer concentration

• LinkedInlinkedin.com/company/bckoudekerk

Compliance5 records

Revenue estimate

Valuation estimate

Number of profiles

Profiles2 records

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Betonmortel Centrale Koudekerk (BCK)