Galvanizing Services Establishment
Galvanizing Services LLC is a UAE-based industrial metal-finishing contractor providing hot-dip galvanizing, abrasive blasting, surface preparation and protective coating services (intumescent, epoxy, airless spray) to steel fabricators, EPC contractors, oil and gas operators, utilities and developers across the Gulf.
- Company typePrivate
- Founded-
- HeadquartersDubai, United Arab Emirates
- Headcount11–50
- GTM typeB2B
- OfferingServices
What Galvanizing Services Establishment does
Galvanizing Services Establishment, operating as Galvanizing Services LLC (GSE) and Galvanizing Services FZE, is a privately held UAE industrial metal-finishing contractor headquartered in Al Quoz Industrial Area 3, Dubai, with a second production site at Hamriyah Free Zone, Ajman and a customer-facing free zone establishment in Sharjah. Reported headcount is 11-50. Its core service is hot-dip galvanizing of mild steel structures and fabricated iron/steel articles to BS EN ISO 1461:2022 and ASTM A123/A153. The customer base is project-based and enterprise-facing: steel fabricators, EPC contractors and infrastructure developers, oil and gas and petrochemical operators (ADNOC, Saudi Aramco, Borouge, Duqm Refinery, Exterran), utilities and government entities (DEWA, Umm Al Quwain IWP, Hassyan 180 MIGD, Expo 2020 UAE Pavilion), and hospitality/real estate developers (Meydan Beach Hotel, FIVE LUXE JBR, One Zabeel, Fujairah Hospital). A portfolio page lists more than 30 named projects, plus at least one cross-border reference (a 330KV overhead line transmission project in Vietnam).
Technically, the galvanizing line comprises garnet-grit mixed abrasive blasting, acid pickling, zinc ammonium chloride fluxing, drying and immersion in a 12.50 m (L) x 1.50 m (W) x 2.40 m (H) molten zinc bath held at 445-455°C, followed by quenching. Published capacity is 3,000 tons per month at the plant, with articles up to 14 m in length and 4 m in height, supported by a 189,000 sq ft factory area, four 10-ton overhead cranes, five forklifts (3-10 tons) and a 100-ton weigh bridge. Surface preparation is performed in-house with a fully automatic grit/garnet/metal-shot mixed blasting machine rated up to 15 tons per hour (1.5 m x 1.0 m aperture) plus roughly 400 sq m of manual blasting area, with surface prep performed to Sa1-Sa3 and additional chemical cleaning, high-pressure water jetting, steam cleaning, power tool cleaning and paint stripping. Coating is also in-house: two painting yards with a combined 300 tons per month of capacity for airless spray painting, intumescent/fireproof coating (protection stated from 30 up to 120-180 minutes depending on coating type and thickness) and epoxy coatings for industrial and marine use. Quality control is supported by an on-premise chemical analysis laboratory verifying coating weight, adhesion, appearance and uniformity.
Commercially, GSE runs one-off project contracts with no recurring or subscription revenue and no published price points. Pricing is quote-based per galvanized article based on shape, size and weight of the article and degree of contamination, with delivery time committed alongside the rate; standalone surface preparation is priced per tonne of processed steel. Certificates of inspection and testing for compliance with BS EN ISO 1461:2009 / ASTM A123/A153 are issued on client request. Go-to-market is direct and web-led: enquiry capture by phone and email to the Dubai and Sharjah offices, service and technical pages optimized for Gulf industrial search, and a named-project portfolio used as the primary conversion proof; no paid digital, distributor or marketplace channels are disclosed. The company is certified by ABS Quality Evaluation to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 across surface preparation, hot dip galvanizing and painting, holds a DASt German quality certificate (I2022Q37980), and is an international member of the Galvanizers Association of America and the Galvanizers Association of the UK with approved-applicator status. Ownership, founder, funding, revenue and headcount history are not disclosed in the source material.
Galvanizing Services Establishment firmographics
Firmographics- Name
- Galvanizing Services Establishment
- Legal name
- Galvanizing Services LLC
- Website
- https://galvserv.com
- Company type
- Private
- Operating status
- Operating
- Headcount range
- 11–50 employees
- Short description
- Galvanizing Services LLC is a UAE-based industrial metal-finishing contractor providing hot-dip galvanizing, abrasive blasting, surface preparation and protective coating services (intumescent, epoxy, airless spray) to steel fabricators, EPC contractors, oil and gas operators, utilities and developers across the Gulf.
- Ownership category
- akta.pro rank
Galvanizing Services Establishment industry classification
Industry- Product category
- Industrial Coating and Metal Finishing Services
- NAICS
- Coating, Engraving, Heat Treating, and Allied Activities (33281)
- SIC
- Abrasive, Asbestos & Misc Nonmetallic Mineral Prods (3290)
- akta.pro industry
- Electroplating & Metal Finishing (Anodizing/Galvanizing/Passivation)Industrials, Manufacturing & Construction/Industrial Services & Facility Operations/Industrial & Commercial Painting, Coating & Surface TreatmentProtective Coatings, Galvanizing & Metal Finishing for Structural SteelIndustrials, Manufacturing & Construction/Building Materials & Products/Structural Steel & Metal Building ProductsPaint Removal, Stripping & Lead AbatementIndustrials, Manufacturing & Construction/Industrial Services & Facility Operations/Industrial & Commercial Painting, Coating & Surface Treatment
Keywords
Where Galvanizing Services Establishment is headquartered
LocationHeadquarters
- HQ city
- Dubai
- HQ country
- United Arab Emirates
- HQ region
- Middle East
Offices3 records
Markets served
Galvanizing Services Establishment business model
Business model- GTM type
- B2B
- Offering type
- Services
- Cost components
- Personnel, Operations, Supply Chain, Infrastructure, Technology or R&D, Marketing or Sales
Revenue model
- Hot-dip galvanizing services: Project-based, one-off service contracts for galvanizing mild steel structures and fabricated iron/steel articles to BS EN ISO 1461 and ASTM A123/A153; priced per article by shape, size and weight and degree of contamination, with certificates of inspection and testing issued on client request.
- Protective painting services: One-off contract painting of steel items: airless spray painting, fireproof/intumescent painting and epoxy painting, delivered from two painting yards with a combined capacity of 300 tons per month.
- Surface preparation and abrasive blasting services: Standalone and pre-coating surface preparation services: blast cleaning to Sa1-Sa3, sweep blasting, chemical cleaning, power tool cleaning, high pressure water jetting, steam cleaning and paint stripping, priced per tonne of processed steel.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Unit Pricing | Pay-as-you-go | Quote-based pricing per galvanized article based on shape, size, weight and degree of contamination |
Go-to-market motion2 records
Distribution channels3 records
Marketing channels4 records
Galvanizing Services Establishment product offering
Product offeringCore offering
Galvanizing Services LLC operates its own hot dip galvanizing plant in Al Quoz, Dubai (plus a plant in Hamriyah Free Zone, Ajman and a Sharjah Free Zone office), immersing mild steel structures and fabricated iron/steel articles in a 12.5 m x 1.5 m x 2.4 m molten zinc bath at 445-455°C after garnet-grit blasting, acid pickling and zinc ammonium chloride fluxing, to BS EN ISO 1461:2022 and ASTM A123/A153, with 3,000 tons monthly plant capacity and material up to 14 m long and 4 m high. The same site delivers in-house surface preparation (degreasing, pickling, rinsing, fluxing, drying, abrasive and sweep blasting) and protective painting — airless spray painting, intumescent/fireproof painting and epoxy coating — from two painting yards with a combined capacity of 300 tons per month.
Product overview
Galvanizing Services LLC (GSE) is a single, unified industrial metal-finishing service offering rather than a software platform with modules: it operates its own hot dip galvanizing plant in Al Quoz, Dubai (plus a Sharjah Free Zone/Hamriyah presence) and delivers the core service of Hot Dip Galvanizing, with Surface Preparation and Abrasive Blasting (including the specialized Sweep Blasting variant) as the preparatory stages that feed into it. Building on that core, the company adds a painting/coating module comprising Airless Spray Painting, Fireproof (intumescent) Painting and Epoxy Painting, supported by the Galvanizing Plant Facilities (zinc bath, tanks, cranes, weigh bridge, chemical analysis lab) that deliver the capacity behind these services.
Differentiator
Problem solved
Functional benefit
Products and services
- Hot Dip Galvanizing Steel is coated by dipping into a molten zinc bath at 445-455°C, forming zinc-iron alloy coatings that provide long-term cathodic corrosion protection to iron and steel structures. Performed to BS EN ISO 1461 and ASTM A123/A153 standards, with materials up to 14 mtr length and 4 mtr height processed at a plant capacity of 3,000 tons monthly; sold to steel fabricators, EPC contractors and asset owners for bridges, structural steel, guardrails and industrial plant items.
- Abrasive Blasting Surface preparation method that propels high-velocity abrasive particles to remove rust, scale, old coatings, grease and dirt, leaving surfaces cleaned and profiled (Sa1-Sa3) for maximum coating and zinc adhesion. The plant runs a fully automatic grit/garnet/metal-shot mixed blasting machine plus manual blasting over approximately 400 sq. mtr, capable of handling up to 15 tons per hour.
- Sweep Blasting Specialized gentle abrasive blasting technique using a controlled stream of abrasive for precise cleaning and preparation of surfaces such as galvanized steel, minimizing overspray and waste while preserving the underlying material, for clients requiring surfaces prepared for painting or other coatings.
- Surface Preparation Multi-step preparation process (degreasing, pickling, rinsing, fluxing, drying) that removes oil, grease, dirt, rust and mill scale and applies a zinc ammonium chloride flux before hot dip galvanizing. Work is executed to Swedish Standards, SSPC, NACE, ISO 4624 and ISO 2802, plus chemical cleaning, wet abrasive blasting, high pressure water jetting, steam cleaning and power tool cleaning options.
- Airless Spray Painting Painting method that pressurizes paint through a pump and an extremely small nozzle to form a fine spray without compressed air, delivering quick application, thicker coats, smooth finish and better adhesion. Supported by two painting yards with a capacity of 300 tons per month for applying the complete range of industrial coating systems to steel items.
- Fireproof Painting (Intumescent Painting) Specialized fire-resistant coating that swells under heat to form an insulating char layer, slowing heat transfer and protecting structural steel from collapse. Fire protection durations range from 30 minutes up to 120-180 minutes depending on coating type, thickness and structural requirements; used in refineries, chemical plants, power houses, skyscrapers, shopping malls and steel frames.
- Epoxy Painting Protective finish made from epoxy resins and hardeners that forms a durable, chemical-resistant layer adhering strongly to metal, concrete and wood. Used for industrial floors, steel structures and marine applications, offering high wear, abrasion and chemical resistance with a glossy, easy-to-clean finish.
Quantifiable outcome
- Corrosion protection extending the maintenance-free life of galvanized steel for decades
- +3 more outcomes
Companies that use Galvanizing Services Establishment
Customer profileNamed customers26 records
Segments3 records
Ideal customer profiles3 records
Galvanizing Services Establishment technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature6 records
Galvanizing Services Establishment partnerships and signals
Strategic signalPartnerships
Four partnerships are on record, tiered core and minor.
- Galvanizers Association of America (GAA)coreGSE is an international member of the Galvanizer's Association of America. Membership certificates are displayed on the website alongside the Galvanizer's Association of the U.K. membership, supporting credibility with specifiers and fabricators in the US market.
- Galvanizers Association of the U.K.coreGSE is an international member of the Galvanizer's Association of the U.K., highlighted with an 'International Membership' section and certificate image on the company website as part of its quality positioning.
- ABS Quality Evaluation (M/S ABS)coreABS Quality Evaluation certifies GSE as an approved company in conformance with ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 covering surface preparation, hot dip galvanizing and painting. ABS also supports the on-site chemical analysis and quality assurance function.
- DASt / TÜV VerbandminorGSE holds a DASt German Quality Certificate with registration number I2022Q37980, evidencing independent third-party quality verification of its galvanizing and coating processes.
Scale indicators10 records
Recent moves8 records
Expansion highlights7 records
Galvanizing Services Establishment competitors and assessment
Company assessmentDirect peers
- Gavanize: Ireland/UK-based hot dip galvanizing and industrial coating specialist running multiple plant lines with ISO-accredited quality systems. Closest business-model match to GSE: plant-based molten zinc galvanizing of fabricated steel sold to EPC, construction and infrastructure buyers, with painting and blasting offered alongside.
- AZZ Inc. US metal coatings company operating galvanizing (including hot dip), powder coating and plating plants sold to industrial fabricators and infrastructure contractors. Directly comparable in that it monetises owned galvanizing/coating assets against steel fabrication and construction volumes.
Emerging players
- Galvanize It Corporation: On-site/mobile hot dip galvanizing operator serving steel fabricators, bridges and infrastructure in the US. Overlaps on the core hot dip galvanizing service and corrosion-protection value proposition but uses a portable, job-site delivery model instead of GSE's fixed plants.
Broad incumbents
- Bodycote plc: Global surface engineering and coating services group (thermal spray, diffusion coatings, specialist coatings) serving aerospace, energy and industrial markets. Comparable as an asset-backed metal-finishing services provider, but with a far broader and more specialised portfolio and global footprint than GSE.
- Hempel A/S: Global paint and coatings manufacturer whose protective and marine/industrial coating systems (including intumescent and epoxy ranges) compete directly with GSE's painting yards for the same refinery, offshore and infrastructure specification budgets.
- AkzoNobel (International Paint): Major coatings supplier with an extensive corrosion-protection and fire-protection range sold to oil & gas, marine and construction asset owners in the Gulf. It competes upstream of GSE for the same coating spend even though it does not operate galvanizing plants.
- Jotun: Norwegian protective-coatings group with strong Middle East presence supplying corrosion and fire protection systems to oil & gas, marine and infrastructure projects. Competes for the same intumescent and protective painting scope that GSE delivers from its two painting yards.
- Sherwin-Williams: Global industrial and protective coatings incumbent with a large UAE/KSA presence selling heavy-duty and fireproof systems to contractors and asset owners. A downstream substitute/competitor for GSE's airless spray, intumescent and epoxy painting revenue lines.
Others
- SGS: Global inspection, testing and certification body that issues the third-party quality assurance and standards-compliance verification on which galvanized steel is specified. It is an ecosystem participant rather than a competitor, but its certification price list is a direct cost line in GSE's cost of qualifying for mega-projects.
- AMPP (Association for Materials Protection and Performance): Industry body that develops and maintains the surface-preparation and protective-coating standards (SSPC/NACE series, coating and surface preparation specifications) referenced by GSE's blast-cleaning and painting services. It shapes the qualification rules GSE must satisfy and the standards barrier that protects incumbents.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat7 records
Key risks7 records
Key highlights7 records
Customer concentration
Galvanizing Services Establishment social profiles
Digital presenceGalvanizing Services Establishment compliance and trust
Trust signalCompliance5 records
Galvanizing Services Establishment financial estimates
Financial estimateRevenue estimate
Valuation estimate
Galvanizing Services Establishment leadership team
Management profileNumber of profiles
Galvanizing Services Establishment funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Galvanizing Services Establishment M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Galvanizing Services Establishment
What does Galvanizing Services Establishment do?
Galvanizing Services LLC operates its own hot dip galvanizing plant in Al Quoz, Dubai (plus a plant in Hamriyah Free Zone, Ajman and a Sharjah Free Zone office), immersing mild steel structures and fabricated iron/steel articles in a 12.5 m x 1.5 m x 2.4 m molten zinc bath at 445-455°C after garnet-grit blasting, acid pickling and zinc ammonium chloride fluxing, to BS EN ISO 1461:2022 and ASTM A123/A153, with 3,000 tons monthly plant capacity and material up to 14 m long and 4 m high. The same site delivers in-house surface preparation (degreasing, pickling, rinsing, fluxing, drying, abrasive and sweep blasting) and protective painting — airless spray painting, intumescent/fireproof painting and epoxy coating — from two painting yards with a combined capacity of 300 tons per month.
Is Galvanizing Services Establishment a public or private company?
Galvanizing Services Establishment is a private company. It is classified as unknown and is currently operating.
When was Galvanizing Services Establishment founded?
Galvanizing Services Establishment was founded in -1. It employs 11 to 50 people.
Where is Galvanizing Services Establishment based?
Galvanizing Services Establishment is headquartered in Dubai, United Arab Emirates, in the Middle East region.
How does Galvanizing Services Establishment make money?
Three revenue lines are on record. Hot-dip galvanizing services are the primary driver. The others are protective painting services and surface preparation and abrasive blasting services.
Who are Galvanizing Services Establishment's main competitors?
Direct peers on record are Gavanize and AZZ Inc.. Galvanize It Corporation is listed as an emerging player. Broad incumbents are Bodycote plc, Hempel A/S, AkzoNobel (International Paint), Jotun and Sherwin-Williams. Others are SGS and AMPP (Association for Materials Protection and Performance).
Does Galvanizing Services Establishment have an API?
No public API is recorded for Galvanizing Services Establishment.
What industry is Galvanizing Services Establishment in?
Galvanizing Services Establishment's product category is Industrial Coating and Metal Finishing Services. Its primary akta.pro industry code is IMAIAKAE, Electroplating & Metal Finishing (Anodizing/Galvanizing/Passivation), with a secondary code of IMADACAK, Protective Coatings, Galvanizing & Metal Finishing for Structural Steel. Its NAICS code is 33281 and its SIC code is 3290.