persei space
PERSEI Space is a Spanish deep-tech spin-off of Universidad Carlos III de Madrid that builds electrodynamic tether systems for propellant-less satellite deorbiting and in-space propulsion, selling deorbit hardware, the BETsMA v2.0 mission-analysis software and MADES/SACS satellite test services to satellite operators, launch providers, in-orbit servicing missions and space agencies.
- Company typePrivate
- Founded2023
- HeadquartersLeganés, Spain
- Headcount1–10
- GTM typeB2B
- OfferingHardware or Manufacturing
What persei space does
PERSEI Space (Persei Space SL, Leganés, Madrid, Spain) develops electrodynamic tether (EDT) systems for spacecraft end-of-life deorbiting and propellant-less in-space propulsion, and was founded in September 2023 as a spin-off of Universidad Carlos III de Madrid by the E.T.PACK-F project team. The underlying mechanism is a long conductive aluminium ribbon deployed from a spacecraft that interacts with Earth's magnetic field and ionospheric plasma to generate a Lorentz force, producing drag or thrust without carrying propellant. The stack includes a bare-photovoltaic tether variant with integrated CIGS/perovskite cells, hollow-cathode electron emitters, reel-in/reel-out deployment mechanisms, an autonomous architecture (own solar power, independent UHF/S-band telemetry and telecommand, onboard detumbling), and the in-house BETsMA v2.0 mission-analysis simulation suite with bare, low-work-function and bare-photovoltaic tether models.
The portfolio is a platform-plus-modules architecture rather than a single product line. Hardware consists of the Autonomous Deorbit Device (DD), whose E.T.PACK-F prototype is a flight-ready 12U, 20 kg unit with a 420 m aluminium tape tether (2.5 cm wide, 40 µm thick) and hollow-cathode electron emitter; the Green Mobility Module (GMM), a 3U, 7 kg, 100 W, 10 mN-thrust module for 70-210 kg satellites developed under the EIC Pathfinder project E.T.COMPACT; and PEARSON, the announced first commercial line with a roughly 1 km tether for spacecraft of approximately 100 kg to 1,000 kg or more, targeted for commercialisation in 2027/2028. Around these, the company sells satellite services: BETsMA v2.0 software licensing (the source of first revenue in 2024), MADES magnetic dipole characterisation for 1U-12U spacecraft, and SACS hardware-in-the-loop attitude determination and control testing for satellites under 40 kg.
Revenue is overwhelmingly derived from public R&D and institutional contracts rather than commercial sales. Since 2019 the company has attracted more than EUR 10 million in competitive funding across E.T.PACK (EUR 3 million, 2019-2022), E.T.PACK-F (EUR 2.5 million, 2022-2025), E.T.COMPACT (EUR 4 million, 2024-2027), the CDTI NEOTEC grant (EUR 335,000, 2026-2028) and the ESA ECO-Tethers contract (EUR 300,000, 2026-2027). Go-to-market is technical and mission-led: hardware is either integrated into customer satellites before launch for compliance with the U.S. FCC 5-year rule and ESA's Zero Debris Approach, or delivered as a payload on third-party in-orbit servicing vehicles for active debris removal; software and test services are sold directly to satellite developers, operators, agencies and researchers. Pricing is entirely quote-based through 'Request Data Sheet' and contact forms, with no published list prices, tiers or self-serve purchase. The company has five core team members listed plus five academic partners who are shareholders and co-founders, and no institutional equity round is disclosed.
persei space firmographics
Firmographics- Name
- persei space
- Legal name
- Persei Space SL
- Website
- https://perseispace.com
- Company type
- Private
- Founded year
- 2023
- Operating status
- Operating
- Headcount range
- 1–10 employees
- Short description
- PERSEI Space is a Spanish deep-tech spin-off of Universidad Carlos III de Madrid that builds electrodynamic tether systems for propellant-less satellite deorbiting and in-space propulsion, selling deorbit hardware, the BETsMA v2.0 mission-analysis software and MADES/SACS satellite test services to satellite operators, launch providers, in-orbit servicing missions and space agencies.
- Ownership category
- akta.pro rank
persei space industry classification
Industry- Product category
- Space Debris Mitigation Hardware (Electrodynamic Tether Deorbit and Propulsion Systems)
- NAICS
- Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing (336419), Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing (336415), Guided Missile and Space Vehicle Manufacturing (336414)
- SIC
- Guided Missiles & Space Vehicles & Parts (3760), Measuring & Controlling Devices, Nec (3829)
- akta.pro industry
- Space Logistics & In-Orbit Servicing (Refueling, Tug, Debris Removal)Industrials, Manufacturing & Construction/Aerospace & Defense Manufacturing/Spacecraft & Launch Vehicle ManufacturingSpacecraft Propulsion (In-Space) & ThrustersIndustrials, Manufacturing & Construction/Aerospace & Defense Manufacturing/Spacecraft & Launch Vehicle ManufacturingSpace Structures, Mechanisms & Thermal ControlIndustrials, Manufacturing & Construction/Aerospace & Defense Manufacturing/Spacecraft & Launch Vehicle ManufacturingSpacecraft Integration, Assembly & Test (IAT)Industrials, Manufacturing & Construction/Aerospace & Defense Manufacturing/Spacecraft & Launch Vehicle Manufacturing
Keywords
Where persei space is headquartered
LocationHeadquarters
- HQ city
- Leganés
- HQ country
- Spain
- HQ region
- Europe
Offices2 records
Markets served
persei space business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Technology or R&D, Personnel, Operations, Infrastructure, Marketing or Sales
Revenue model
- BETsMA v2.0 mission-analysis software licensing: The BETsMA v2.0 simulator was the source of PERSEI Space's first revenue after entering ESA-BIC Madrid incubation in 2024. Sold as software to satellite operators, space agencies and mission planners for sizing and validating electrodynamic tether missions; pricing model is not publicly disclosed.
- Deorbit device hardware sales (PEARSON commercial line): Commercial sale of autonomous, propellant-free electrodynamic tether deorbit devices (PEARSON), with a ~1 km tether, subsystems optimised for higher reliability and lower cost, and interfaces tailored to customer needs. Commercialization targeted for 2027/2028 for medium-to-large objects (satellites, upper stages, payload adapters). Sold as pre-launch integrated subsystems or as payloads for in-orbit servicing vehicles.
- Satellite test and characterisation services (MADES, SACS): Service revenue from magnetic dipole characterisation of satellites before flight (MADES) and hardware-in-the-loop testing of attitude determination and control systems (SACS), delivered to satellite developers and integrators, with downloadable data sheets and on-request customisation.
- Public R&D and system-study contracts (ESA, EIC, CDTI): Contract and grant income from institutional programmes: ESA ITT 1-12998 (ECO-Tethers, EUR 300 k), EIC-funded E.T.PACK (EUR 3 M), E.T.PACK-F (EUR 2.5 M) and E.T.COMPACT (EUR 4 M), plus a CDTI NEOTEC grant of EUR 335 k for 2026-2028. These fund technology development and the in-orbit demonstration.
Go-to-market motion3 records
Distribution channels5 records
Marketing channels7 records
persei space product offering
Product offeringCore offering
PERSEI Space develops propellant-less deorbit and in-space propulsion systems based on electrodynamic tether (EDT) technology. The company sells electrodynamic tether hardware subsystems — the Autonomous Deorbit Device (12U, 20 kg, 420 m aluminium tape tether with hollow-cathode electron emitter) and the compact 3U, 7 kg Green Mobility Module — plus the BETsMA v2.0 mission-analysis software and two satellite test services (MADES magnetic characterisation, SACS attitude control testing). These enable satellite operators and launch providers to meet international debris mitigation requirements (US FCC 5-year rule, ESA Zero Debris Approach) without carrying propellant.
Product overview
PERSEI Space offers a portfolio built around a single electrodynamic tether (EDT) technology platform rather than one unified product: a core platform-plus-modules architecture in which EDT hardware subsystems, a mission-analysis software layer and satellite test services combine. The hardware line consists of the Autonomous Deorbit Device (DD), whose E.T.PACK-F prototype (12U, 20 kg, 420 m tether) is flight-ready and whose successor commercial line is PEARSON (~1 km tether, commercialization targeted 2027/2028), plus the Green Mobility Module (GMM), a 3U, 7 kg propellant-less deorbiting and propulsion module for 70–210 kg satellites developed under the EIC Pathfinder project E.T.COMPACT. These hardware subsystems are sized and validated with the software layer BETsMA v2.0, the mission-analysis simulator that returns optimal tether configuration and full mission results and that also produced the ECO-Tethers simulation campaigns. Around those, PERSEI Space sells satellite services: MADES for magnetic dipole characterisation before flight and SACS for hardware-in-the-loop testing of attitude determination and control systems, with SACS already used to validate the ADCS of the 12U E.T.PACK-F deorbit device.
Differentiator
Problem solved
Functional benefit
Brands
- BETsMA v2.0: Mission analysis software for electrodynamic tether systems (SYS.01), analysing deorbiting, reboost, station-keeping and power-harvesting missions.
- Autonomous Deorbit Device (DD)
- Green Mobility Module (GMM)
- MADES
- SACS
- PEARSON
Products and services
- BETsMA v2.0 BETsMA (Bare Electrodynamic Tether Mission Analysis) v2.0 is software for analysing missions with electrodynamic tethers: users input spacecraft mass, orbits and the EDT objective (deorbiting, reboost, station-keeping or power harvesting) and it returns the optimal tether configuration (cathode technology and tether dimensions) plus orbital evolution, electrical variables, forces, tether dynamics, thermal behaviour and safety considerations. It also serves as a research tool simulating bare, low-work-function and bare-photovoltaic tethers with point-like, multi-bar and multi-particle dynamic models, and it was used for the ECO-Tethers parametric simulation campaign and PEARSON deorbit performance projections.
- Autonomous Deorbit Device (DD) Compact propellant-less electrodynamic tether subsystems that guarantee post-mission disposal of objects in low Earth orbit, integrable before launch for regulatory compliance or deployable as payload on in-orbit servicing vehicles for active debris removal. Fully autonomous versions generate their own power via small solar arrays, maintain independent telemetry and telecommand and perform attitude control such as detumbling without host satellite input; a non-autonomous, more compact and lower-cost variant is also offered. The E.T.PACK-F prototype is a 12U unit of 20 kg mass with a 420 m aluminium tape tether and hollow-cathode electron emitter, targeting host satellites over 200 kg.
- Green Mobility Module (GMM) A next-generation electrodynamic tether system in a 3U form factor, providing propellant-less deorbiting and in-space propulsion for satellites in the 70–210 kg class by interacting with Earth's magnetic field and harvesting power from the spacecraft solar arrays. It is being developed within the EIC Pathfinder project E.T.COMPACT (2024–2027) targeting TRL 4 by 2027, researching deorbiting plus propulsion, the Bare Photovoltaic Tether (BPT) with CIGS/perovskite technology, advanced reel-in/reel-out mechanisms and a highly integrated autonomous architecture; specifications are 7 kg system mass, 100 W power consumption and up to 10 mN thrust.
- MADES (Magnetic Dipole Estimation Setup) MADES is a cost-effective magnetic characterisation platform with an adjustable non-metallic frame, 12 magnetic sensors and dedicated algorithms estimating dipole position, direction and magnitude, supporting satellites from 1U to 12U and enabling magnetic cleanliness testing of ADCS hardware and magnetically sensitive payloads without a dedicated clean facility. It was cross-validated on the E.T.PACK-F satellite against a conventional Helmholtz cage and fluxgate setup, with estimation errors of 6% in dipole magnitude, 8° in direction and 8 mm in position.
- SACS (Satellite Attitude Control Simulator) SACS is a satellite attitude control simulator offering hardware-in-the-loop validation of ADCS sensors, actuators and algorithms for satellites under 40 kg through a three-degrees-of-freedom rotational air bearing and a sunlight/albedo emulator in a near-zero-friction environment. It is equipped with gyroscope, magnetometer, accelerometer and sun emulator and supports reaction wheels, cold gas systems and magnetorquers, with 1° heading and 0.5° inclination attitude estimation; it was used extensively in E.T.PACK-F to validate the ADCS of a 12U autonomous deorbit device.
- PEARSON Announced first commercial product, an autonomous and propellant-less electrodynamic tether deorbit device developed from the lessons of the E.T.PACK-F in-orbit demonstration. It is intended as a scalable solution for deorbiting satellites from roughly 100 kg up to 1,000 kg or more, with a longer tether (around 1 km), subsystems optimised for higher reliability and lower cost and customer-tailored interfaces, with commercialization targeted for 2027/2028 for medium-to-large objects such as satellites, upper stages and payload adapters.
Quantifiable outcome
- A 100 kg satellite at 800 km altitude and 50° orbital inclination is expected to deorbit in approximately five months, comfortably meeting the strictest international debris mitigation requirements including the proposed five-year post-mission disposal guidelines
- +4 more outcomes
Companies that use persei space
Customer profileNamed customers2 records
Segments6 records
Ideal customer profiles6 records
persei space technology and API
TechnologyTechnology focussed Yes
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature8 records
persei space partnerships and signals
Strategic signalPartnerships
Eight partnerships are on record, tiered flagship, core and minor.
- Thales Alenia SpaceflagshipPartner in the ESA-funded ECO-Tethers system study (ESA ITT 1-12998), where PERSEI Space is prime contractor and Thales Alenia Space contributes system integration expertise. Thales Alenia Space also accelerates PERSEI Space through its Space Business Catalyst programme and is listed among the company's supporters. A joint venture between Thales and Leonardo with 40+ years in telecommunications, navigation and Earth observation, it signed ESA's Zero Debris Charter in June 2024.
- Astroscale FranceflagshipPartner in the ESA-funded ECO-Tethers system study (ESA ITT 1-12998) alongside PERSEI Space and Thales Alenia Space, bringing operational experience in in-orbit servicing, inspection, mobility and debris removal missions. Founded in 2013, the ECO-Tethers Concept Key Point meeting was held at Astroscale's Toulouse facilities. On the roadmap, Astroscale and Thales Alenia Space also act as customer representatives in the study.
- European Space Agency (ESA)corePERSEI Space is prime contractor on the 12-month ESA system study 'FIRST! Technologies in Sustainability for Future Space Transportation: System Study' (ITT 1-12998) worth EUR 300 k, and received the ESA FIRST! Sustainability Award for ECO-Tethers at ESA HQ in Paris in March 2026. PERSEI Space is also a signatory of ESA's Zero Debris Charter and Technical Coordinator for Domain 2, is incubated at ESA-BIC Madrid, and the 2027 E.T.PACK-F demonstration is supported by the EC/ESA Flight Ticket Initiative.
- Universidad Carlos III de Madrid (UC3M)corePERSEI Space was constituted in September 2023 by the E.T.PACK-F project team as a spin-off of Universidad Carlos III de Madrid, which coordinates the E.T.PACK/E.T.PACK-F/E.T.COMPACT projects. UC3M is also where Livia Marciano carries out an industrial PhD with the company and where the company is hosted at C3N-IA Parque Científico UC3M and ESA-BIC Madrid.
- Università degli Studi di PadovaminorMember of the European E.T.PACK consortium alongside UC3M, TU Dresden and Sener Aerospace & Defence; academic partner Andrea Valmorbida (Professor at UNIPD) is a shareholder/co-founder of PERSEI Space, with Enrico Lorenzini (Honorary Professor at UNIPD, involved in NASA's most important tether missions 1990-2003) also a shareholder/co-founder.
- Technische Universität Dresden (TU Dresden)minorMember of the European E.T.PACK consortium; TU Dresden's machining laboratory produced the non-functional dummy unit replicating the E.T.PACK-F flight model's mass properties to confirm launcher compatibility and act as backup payload. Academic partner Martin Tajmar (Professor at TU Dresden, expert in electric propulsion and cathodes, research stay at NASA JPL Advanced Propulsion Group) is a shareholder/co-founder.
- Sener Aerospace & DefenceminorIndustrial member of the European E.T.PACK consortium alongside Universidad Carlos III de Madrid (coordinator), Università degli Studi di Padova and TU Dresden, contributing to the E.T.PACK and E.T.PACK-F electrodynamic tether development programme.
- AVIOcoreLaunch provider through which the 2027 in-orbit demonstration of the E.T.PACK-F deorbit device is coordinated, with support from the ESA/EC Flight Ticket Initiative. PERSEI Space has also manufactured a dummy unit to confirm launcher compatibility ahead of the flight.
Scale indicators11 records
Recent moves6 records
Expansion highlights8 records
persei space competitors and assessment
Company assessmentDirect peers
- D-Orbit: Italian operator of the ION Satellite Carrier, commercialising in-orbit servicing, last-mile delivery and debris removal for satellite operators and launch providers — the same buyer set PERSEI targets with deorbit hardware, though D-Orbit uses conventional propulsion rather than electrodynamic tethers.
- Astroscale: Debris removal and in-orbit servicing operator (ADRAS-J, ELSA-d, APS-R) that is simultaneously PERSEI's ECO-Tethers partner and customer representative in the ESA study, and a potential channel for delivering PERSEI deorbit devices as servicing-vehicle payloads.
- ESPRIT: Develops and operates a servicing vehicle (Capture/Remove) for capturing and deorbiting client satellites, competing directly for the same regulatory-driven end-of-life disposal and debris-removal missions PERSEI addresses with propellant-free devices.
- Clear Space: ESA-backed Swiss company developing capture and removal of debris and defunct satellites in LEO, one of the few Western firms pursuing active debris removal commercially and therefore a close competitor for European ADR and compliance budgets.
- Exotrail: European in-space propulsion company (ExoThruster, REMOVE debris-removal mission) selling propulsion and debris-removal solutions to the same smallsat and debris-mitigation customers, competing for the propulsion budget PERSEI addresses with electrodynamic tethers.
Broad incumbents
- Lockheed Martin Space: Acquired Terran Orbital, whose Curator satellite was designed for on-orbit servicing and debris removal; as a major space prime it can bundle disposal capability into satellite programmes and act as both competitor and potential integrator of PERSEI devices.
- Thales Alenia Space: Major European space prime and PERSEI's flagship partner in the ESA ECO-Tethers study and Space Business Catalyst accelerator, with its own debris-mitigation, in-orbit servicing and satellite integration capability that makes it both a partner and a potential competing integrator.
Emerging players
- Reflex Aerospace: European startup building high-performance in-space propulsion and attitude-control systems for smallsats and debris-removal missions, competing for the same 70–210 kg satellite class and mission budgets as PERSEI's Green Mobility Module.
- Impulse Space: New-space propulsion and in-space logistics company (Orbital Link transfer vehicles, Helios kick stage) addressing orbital mobility and debris missions with chemical propulsion, overlapping PERSEI's propellant-free station-keeping, reboost and transfer use cases.
Others
- Sener Aerospace & Defence: European space and defence engineering house and member of the E.T.PACK consortium alongside PERSEI, with space structures, mechanisms and tether-related heritage; comparable as a European space-hardware engineering partner rather than a direct commercial rival.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat5 records
Key risks7 records
Key highlights7 records
Customer concentration
persei space social profiles
Digital presencepersei space compliance and trust
Trust signalCompliance5 records
persei space financial estimates
Financial estimateRevenue estimate
Valuation estimate
persei space leadership team
Management profileNumber of profiles
Profiles10 records
persei space funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
persei space M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about persei space
What does persei space do?
PERSEI Space develops propellant-less deorbit and in-space propulsion systems based on electrodynamic tether (EDT) technology. The company sells electrodynamic tether hardware subsystems — the Autonomous Deorbit Device (12U, 20 kg, 420 m aluminium tape tether with hollow-cathode electron emitter) and the compact 3U, 7 kg Green Mobility Module — plus the BETsMA v2.0 mission-analysis software and two satellite test services (MADES magnetic characterisation, SACS attitude control testing). These enable satellite operators and launch providers to meet international debris mitigation requirements (US FCC 5-year rule, ESA Zero Debris Approach) without carrying propellant.
Is persei space a public or private company?
persei space is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was persei space founded?
persei space was founded in 2023. It employs 1 to 10 people.
Where is persei space based?
persei space is headquartered in Leganés, Spain, in the Europe region.
How does persei space make money?
Four revenue lines are on record. BETsMA v2.0 mission-analysis software licensing is the primary driver. The others are deorbit device hardware sales (PEARSON commercial line), satellite test and characterisation services (MADES, SACS) and public R&D and system-study contracts (ESA, EIC, CDTI).
Who are persei space's main competitors?
Direct peers on record are D-Orbit, Astroscale, ESPRIT, Clear Space and Exotrail. Broad incumbents are Lockheed Martin Space and Thales Alenia Space. Emerging players are Reflex Aerospace and Impulse Space. Sener Aerospace & Defence is listed as an others.
Does persei space have an API?
No public API is recorded for persei space.
What industry is persei space in?
persei space's product category is Space Debris Mitigation Hardware (Electrodynamic Tether Deorbit and Propulsion Systems). Its primary akta.pro industry code is IMABACAM, Space Logistics & In-Orbit Servicing (Refueling, Tug, Debris Removal), with a secondary code of IMABACAE, Spacecraft Propulsion (In-Space) & Thrusters. Its NAICS code is 336419 and its SIC code is 3760.