Kinetic Technologies
Kinetic Technologies is a fabless analog and mixed-signal semiconductor company that designs proprietary power management and protection ICs for mobile, enterprise, automotive, industrial, and AI-infrastructure OEMs worldwide, selling via direct offices and a global distributor network.
- Company typePrivate
- Founded2006
- HeadquartersSunnyvale, United States
- Headcount101–250
- GTM typeB2B
- OfferingHardware or Manufacturing
What Kinetic Technologies does
Kinetic Technologies designs and markets proprietary high-performance analog and mixed-signal integrated circuits for power management and protection. The company is a fabless semiconductor vendor, headquartered in San Jose, California, originating from Akros Silicon (founded 2006), with R&D and operations spanning Silicon Valley, Hsinchu, Shanghai, Shenzhen, and Wuxi, plus direct sales coverage in Korea, Japan, Sweden, Hong Kong, and Singapore. Its portfolio of more than 250 custom and application-specific standard products (ASSPs), built on 100+ silicon-proven IP assets, targets power conversion, regulation, protection, and monitoring at the ports of electronic systems.
The product set covers six categories: protection and system monitoring ICs (overvoltage, surge, ESD, TVS, USB data-line protection); interface and isolation (GPIO, load switches, eFuses); display power (LED flash, RGB LED drivers, LED backlight drivers, LCD bias); DC-DC conversion (non-isolated and isolated buck regulators with proprietary OptiComp and AOT control schemes); charging (Qi-certified wireless power receivers); and Power over Ethernet (IEEE 802.3af/at/bt PD controllers and bridge rectifiers, including the KTA1142 90W PD controller). The portfolio carries industry certifications including Qi/WPC, IEEE 802.3, IEC 61000-4-2/4-5, and AEC-Q100, and is supported by patented technology layers such as OptiComp frequency control, PureSine motor drive, BrightExtend and CoolExtend thermal management, PwrCSP WLCSP packaging, and flat-clamp TVS protection.
Kinetic sells through direct sales offices, an online sample/datasheet portal, and a global network of authorized distributors (Digi-Key, Mouser, WPG) and regional sales representatives. Products ship into mobile and consumer electronics, enterprise and networking equipment, automotive and industrial applications, and an explicitly targeted AI-infrastructure and high-performance-compute end-market. The company's revenue base is concentrated in bulk IC shipments across this multi-vertical mix, with cumulative shipments exceeding three billion chips. In April 2026, Cyient Semiconductors closed a 74% majority-stake acquisition for $85 million, integrating Kinetic into a larger India-anchored semiconductor platform pursuing the stated $44 billion global power and compute infrastructure market.
Kinetic Technologies firmographics
Firmographics- Name
- Kinetic Technologies
- Legal name
- Kinetic Technologies
- Website
- https://kinet-ic.com
- Company type
- Private
- Founded year
- 2006
- Operating status
- Operating
- Headcount range
- 101–250 employees
- Short description
- Kinetic Technologies is a fabless analog and mixed-signal semiconductor company that designs proprietary power management and protection ICs for mobile, enterprise, automotive, industrial, and AI-infrastructure OEMs worldwide, selling via direct offices and a global distributor network.
- Ownership category
- akta.pro rank
Kinetic Technologies industry classification
Industry- Product category
- Analog and mixed-signal power management semiconductors
- NAICS
- Semiconductor and Other Electronic Component Manufacturing (3344), Navigational, Measuring, Electromedical, and Control Instruments Manufacturing (33451)
- SIC
- Electronic Components, Nec (3679), Industrial Instruments For Measurement, Display, And Control (3823)
- akta.pro primary industry
- Power Management & Power Conversion ICs (PMIC/DC‑DC/AC‑DC/Gate Drivers) (HDAHABAE)
- akta.pro secondary industries
- Automotive & Industrial ICs (ADAS/Powertrain/Factory/Robotics) (HDAHABAD), Interface ICs (USB/HDMI/SerDes/Level Shifters) (HDAHAIAD), Isolation & Signal Conditioning ICs (Digital Isolators/Instrumentation) (HDAHAIAI), Wireless Power Transfer & RFID/NFC Front-End ICs (HDAHAMAK)
Keywords
Where Kinetic Technologies is headquartered
LocationHeadquarters
- HQ city
- Sunnyvale
- HQ country
- United States
- HQ region
- North America
Offices12 records
Markets served
Kinetic Technologies business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Technology or R&D, Supply Chain, Personnel, Marketing or Sales, Operations
Revenue model
- Semiconductor Product Sales: Kinetic generates revenue primarily from the sale of proprietary high-performance analog and mixed-signal semiconductor ICs, including power management ICs, protection ICs, DC-DC converters, LED drivers, USB interface ICs, wireless power receivers, and PoE controllers. Products are sold through direct sales offices, distributors (Digi-Key, Mouser, WPG), and authorized representatives globally.
- Custom and ASSP Products: The company offers both custom application-specific standard products (ASSPs) and custom ASIC solutions targeting specific customer applications in power management, protection, and display power, providing higher-margin differentiated products for specialized markets.
- Licensing of IP and Technology: With over 100 silicon-proven IP assets and a broad portfolio of proprietary technologies (OptiComp, PureSine, BrightExtend, CoolExtend, PwrCSP), Kinetic can monetize its IP through technology licensing arrangements for semiconductor design and manufacturing.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Other | Pay-as-you-go | Free Product Samples for Qualified Customers |
Go-to-market motion2 records
Distribution channels5 records
Marketing channels6 records
Kinetic Technologies product offering
Product offeringCore offering
Kinetic Technologies designs, develops, and markets proprietary high-performance analog and mixed-signal integrated circuits (ICs) for power management, protection, regulation, and monitoring in electronic systems. The fabless semiconductor company sells more than 250 custom and application-specific standard products across six families: Protection & System Monitoring ICs, Interface & Isolation ICs, Display Power ICs, DC-DC Conversion ICs, Wireless Power Receivers, and Power over Ethernet controllers, serving mobile/consumer, enterprise/networking, automotive/industrial, and AI infrastructure OEMs worldwide.
Product overview
Kinetic Technologies is a fabless semiconductor company designing, developing, and marketing proprietary high-performance analog and mixed-signal integrated circuits. The company's core products sit 'Behind Every Port,' providing solutions to manage, protect, regulate, and monitor power through USB Type-C, Ethernet, and other power connectors. The product portfolio includes: Protection & System Monitoring ICs (overvoltage, surge, ESD protection, reset ICs); Interface & Isolation ICs (GPIO, load switches, eFuses); Display Power ICs (LED backlight drivers, RGB drivers, LCD bias supplies, camera flash drivers); DC-DC Conversion ICs (non-isolated and isolated converters); Charging ICs (wireless power receivers); and Power Over Ethernet ICs (PoE PD controllers and modules). Notable specific products include the KTS1865 bi-directional USB safety switch, KTZ8869 8-channel LED backlight driver with LCD bias, KTD2052 12-channel RGB LED driver, KTB8400 OptiComp buck regulator, KTB8316 synchronous buck regulator, KTA1142 PoE PD controller, KTU1133 USB 48V EPR port protector, KTS1287/KTS1289 flat-clamp TVS ICs, and KTS1800 USB VBUS safety switch. Products meet standards including Qi/WPC, IEEE802.3, IEC61000-4-2/4-5, and AEC-Q100. The company has R&D centers in Silicon Valley and Asia, with operations and logistics in Asia and Europe.
Differentiator
Problem solved
Functional benefit
Brands
- Behind Every Port™: Company tagline and brand positioning emphasizing that Kinetic's products provide power management, protection, regulation, and monitoring at ports across electronic devices.
- OptiComp™
- PureSine™
- AutoBreathe™
- BrightExtend™
- CoolExtend™
- PwrCSP™
Products and services
- Protection & System Monitoring ICs A portfolio of analog and mixed-signal ICs providing overvoltage protection, surge protection, USB data line protection, EMI/ESD suppression, and smart push-button reset for electronic systems sold to OEMs in mobile, enterprise, automotive, and industrial markets.
- Interface & Isolation ICs GPIO expanders and load switches with integrated eFuse functionality for power distribution and circuit protection in electronic systems sold to OEMs across consumer, enterprise, and industrial segments.
- Display Power ICs Specialized ICs for display applications including camera LED flash drivers, RGB LED driver ICs, LED backlight driver ICs, and LCD bias supply ICs sold to OEMs designing mobile devices, tablets, wearables, and other display-equipped electronics.
- DC-DC Conversion ICs Power conversion solutions including non-isolated and isolated DC-DC converters using proprietary OptiComp and AOT control schemes for voltage regulation requirements across consumer, enterprise, and industrial applications.
- Wireless Power Receiver ICs Wireless power receiver ICs supporting Qi/WPC wireless charging applications in smartphones, wearables, and other consumer electronic devices. The KTE7000 was the industry's first Qi v1.3 certified 5W wireless power receiver when launched in March 2022.
- Power over Ethernet ICs PoE powered device controllers and modules compliant with IEEE 802.3af/at/bt standards that deliver power over Ethernet cables to enterprise networking, IP phone, and wireless access point equipment.
- KTS1865 USB VBUS Bi-Directional Safety Switch 6.5A VBUS bi-directional safety switch optimized for USB Standard Power Range Type-C ports supporting up to 130W sink and 100W source. Includes soft-start, over-voltage protection, reverse-current protection, short-circuit protection, over-current protection, and integrated TVS for IEC surge and ESD protection in a 20-bump WLCSP package.
- KTZ8869 8-Channel LED Backlight Driver with Dual LCD Bias High-efficiency 8-channel LED backlight driver with dual LCD bias power IC for tablets. Features 40V boost voltage, up to 30mA/32.4mA per channel, 12-bit linear or Gamma 2.2 dimming via I2C/PWM, 2.7V to 5.5V input range, and two integrated step-up converters for LED backlighting and LCD bias power in a WQFN55-32 package.
- KTD2052 12-Channel RGB LED Driver 12-channel RGB LED driver with I2C control that drives up to 12 LEDs (4 RGBs) using multiplexed outputs with only 4 PCB traces. Features 14 million colors, 125µA to 24mA per channel in 125µA steps, exponential fade engines, patented AutoBreathe pattern execution, BrightExtend, and CoolExtend thermal management in a 2mm x 2mm UDFN package.
- KTB8400 OptiComp Buck-Switching Regulator Low voltage buck switching regulator using OptiComp frequency control technology. Supports 2.5V to 5.5V input, 0.6V to 3.345V programmable output, 3A output current, ±1% accuracy, fast transient response, 2.4MHz switching frequency, and 90% peak efficiency. I2C programmable with DVS support in a 15-bump WLCSP.
- KTB8316/KTB8311 Synchronous Buck Regulator High-accuracy 2.5A low-voltage adaptive-on-time synchronous buck regulator in PwrCSP HP-WLCSP-6 packaging. Supports 2.5V to 5.5V input, 0.3V to 3.3V output, switching frequency options of 1MHz, 2MHz and 4MHz, ±0.75% output accuracy, peak efficiency up to 90%, and automatic skip mode at light loads.
- KTA1142 PoE Powered Device IC IEEE 802.3bt-compliant PoE powered device IC with integrated DC-DC PWM controller. Supports input power levels up to 90W, Class 0-8 for PoE PD. Integrated features include hot-swap FET, 8-event classification, Type 1-4 PSE detection, and UVLO. Supports Flyback and Active Clamp Forward topologies in a 4x4mm 32-lead WQFN.
- KTU1133 USB 48V EPR Port Protector USB 48V EPR port protector for CC and SBU data lines. USB PD3.0 SPR and PD3.1 48V EPR compatible with 63VDC short-to-VBUS protection on all data lines. Features ±90V surge tolerance, ±15kV air-gap ESD protection, and a fast 60ns OVP response time. Integrates an automatic VBUS level shift circuit and blocking NFET gate driver in a 20-pin WQFN 3mmx3mm package.
- KTS1287 Flat-Clamp TVS IC Flat-clamp TVS IC for high voltage surge and ESD protection of 20V SPR VBUS components. Provides ±250V surge protection and ±30kV ESD contact and air-gap protection in a monolithic IC with active-clamp control circuit, gate-driver, and power MOSFET. Available in 1.66mm x 1.56mm WLCSP or 2mm x 2mm FCDFN packages.
- KTS1289 Flat-Clamp TVS IC Flat-clamp TVS IC for high voltage surge and ESD protection of 28V EPR VBUS components. Provides ±200V surge protection and ±30kV ESD contact and air-gap protection. Maximum clamping voltage of 39V at 80A of 8/20µs surge current. Packaged in 1.66mm x 1.56mm WLCSP or 2mm x 2mm FCDFN packages.
Quantifiable outcome
- Over 3 billion chips shipped, demonstrating proven market adoption and reliability at scale
- +3 more outcomes
Companies that use Kinetic Technologies
Customer profileNamed customers4 records
Segments4 records
Ideal customer profiles4 records
Kinetic Technologies technology and API
TechnologyTechnology focussed Yes
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature10 records
Kinetic Technologies partnerships and signals
Strategic signalPartnerships
One partnership is on record.
- OSAT and Manufacturing PartnerscoreKinetic Technologies operates as a fabless semiconductor company, relying on external Outsourced Semiconductor Assembly and Test (OSAT) partners and manufacturing foundries for chip fabrication, assembly, and testing. This partnership model enables Kinetic to focus on design innovation while leveraging external partners' manufacturing scale and capabilities. Following the Cyient acquisition, Kinetic gains access to India's emerging semiconductor manufacturing ecosystem and OSAT partners.
Scale indicators6 records
Recent moves6 records
Expansion highlights6 records
Kinetic Technologies competitors and assessment
Company assessmentBroad incumbents
- Analog Devices: Analog Devices (including Maxim Integrated) is a broad analog and mixed-signal incumbent serving industrial, automotive, and communications end markets. ADI competes with Kinetic in protection ICs, isolated DC-DC, and high-reliability power management.
- Texas Instruments: TI is the largest analog semiconductor company globally, offering a deep PMIC, DC-DC, USB-PD, and power protection portfolio. While much broader, TI directly competes with Kinetic across virtually every product line and has the scale and reference-design ecosystem to displace smaller PMIC suppliers.
- Renesas Electronics: Renesas is a major analog and mixed-signal semiconductor supplier serving automotive, industrial, and IoT markets. It competes with Kinetic in PMICs, USB-PD controllers, and AEC-Q100-qualified power management solutions.
- STMicroelectronics: ST is a broad-line IDM with a large analog, power, and microcontroller portfolio. It overlaps with Kinetic in PMICs, USB Type-C protection, and automotive-grade power management.
- ON Semiconductor (onsemi): Onsemi is a major analog and power semiconductor supplier with deep automotive, industrial, and cloud-power exposure. It competes with Kinetic in PMICs, USB-PD protection, and increasingly in AI data center power delivery.
Direct peers
- Monolithic Power Systems: MPS is a leading fabless supplier of high-performance analog and mixed-signal power management ICs, with overlapping product categories including DC-DC converters, PMICs, LED drivers, and USB-PD protection. It is one of Kinetic's most direct competitors in PMIC, PoE, and USB Type-C protection sockets.
- Silergy Corp: Silergy is a China-based fabless analog IC company focused on PMICs, DC-DC converters, and battery management for consumer, industrial, and computing applications. It is a direct fabless peer in overlapping power management categories with strong presence in Asian supply chains.
- Diodes Incorporated: Diodes is a fabless/IDM hybrid analog and discrete semiconductor company with strong overlap in PMICs, load switches, USB switches, protection, and display power ICs. It targets many of the same consumer, computing, and industrial customers as Kinetic.
Emerging players
- MaxLinear: MaxLinear is a mixed-signal and RF semiconductor company that has expanded into power management and connectivity for networking and broadband equipment. It is an emerging adjacent peer in the enterprise/networking power and protection categories where Kinetic's PoE and DC-DC products compete.
- Navitas Semiconductor: Navitas is a GaN-based power IC specialist and an explicit partner of Cyient Semiconductors for India's first GaN power IC family. It is an emerging adjacent peer in the high-efficiency power conversion category that complements Kinetic's silicon PMIC and protection portfolio.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat5 records
Key risks6 records
Key highlights7 records
Customer concentration
Kinetic Technologies social profiles
Digital presenceKinetic Technologies compliance and trust
Trust signalCompliance10 records
Kinetic Technologies financial estimates
Financial estimateRevenue estimate
Valuation estimate
Kinetic Technologies leadership team
Management profileNumber of profiles
Profiles7 records
Kinetic Technologies subsidiaries and ownership
Company hierarchySubsidiaries3 records
Kinetic Technologies funding detail
Funding detailFunding overview
Funding rounds1 record
Investors1 record
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Kinetic Technologies M&A and investment
M&A and investmentM&A1 record
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Kinetic Technologies
What does Kinetic Technologies do?
Kinetic Technologies designs, develops, and markets proprietary high-performance analog and mixed-signal integrated circuits (ICs) for power management, protection, regulation, and monitoring in electronic systems. The fabless semiconductor company sells more than 250 custom and application-specific standard products across six families: Protection & System Monitoring ICs, Interface & Isolation ICs, Display Power ICs, DC-DC Conversion ICs, Wireless Power Receivers, and Power over Ethernet controllers, serving mobile/consumer, enterprise/networking, automotive/industrial, and AI infrastructure OEMs worldwide.
Is Kinetic Technologies a public or private company?
Kinetic Technologies is a private company. It is classified as corporate owned and is currently operating.
When was Kinetic Technologies founded?
Kinetic Technologies was founded in 2006. It employs 101 to 250 people.
Where is Kinetic Technologies based?
Kinetic Technologies is headquartered in Sunnyvale, United States, in the North America region.
How does Kinetic Technologies make money?
Three revenue lines are on record. Semiconductor Product Sales are the primary driver. The others are custom and ASSP Products and licensing of IP and Technology.
Who are Kinetic Technologies's main competitors?
Broad incumbents on record are Analog Devices, Texas Instruments, Renesas Electronics, STMicroelectronics and ON Semiconductor (onsemi). Direct peers are Monolithic Power Systems, Silergy Corp and Diodes Incorporated. Emerging players are MaxLinear and Navitas Semiconductor.
Does Kinetic Technologies have an API?
No public API is recorded for Kinetic Technologies.
What industry is Kinetic Technologies in?
Kinetic Technologies's product category is Analog and mixed-signal power management semiconductors. Its primary akta.pro industry code is HDAHABAE, Power Management & Power Conversion ICs (PMIC/DC‑DC/AC‑DC/Gate Drivers), with a secondary code of HDAHABAD, Automotive & Industrial ICs (ADAS/Powertrain/Factory/Robotics). Its NAICS code is 3344 and its SIC code is 3679.