Magnum Venus Products

What Magnum Venus Products does

Magnum Venus Products (MVP) is a privately held, family-owned manufacturer of fluid movement and production solutions for the composites and adhesives industries, headquartered in Oak Ridge, Tennessee with manufacturing and R&D facilities in Knoxville and Lenoir City and a service center in Oldsmar, Florida. The company designs and builds equipment to meter, mix, dispense, and apply materials used in fiberglass-reinforced plastic (FRP) production, including reciprocating piston pumps, pneumatic and hydraulic drive systems, filament winding machines, closed mold injection systems, and proportioning equipment for gelcoat, adhesive, and chop/wet-out processes. Its product portfolio spans the Patriot precision metering platform, the Flex Molding closed mold process, gelcoat and multi-color spray systems, 10:1 adhesive systems, and the MVP Motion automation line for filament winding and reciprocators.

MVP serves enterprise manufacturers across seven primary verticals — Marine, Wind Energy, Aerospace, Oil & Gas, Pool and Bath, Infrastructure, and Transportation — with documented customer outcomes including cycle time reductions of more than 50 percent, waste reductions from 30 percent to near zero, and catalyst-to-resin variance under 1 percent versus 25-30 percent at competitor systems. Revenue is generated primarily through hardware sales of capital equipment, supported by parts, accessories, and a CARE technical service and training program. The company sells directly through a regional sales team in North America and through a network of certified international distributors in markets including Finland, Colombia, Spain, Australia, and broader Europe. Founded in 1938 as Graves Spray Supply and consolidated into its current form through the 2000 merger of Magnum Industries and Venus Products, MVP is now in its third generation of Hedger family leadership.

Name

Magnum Venus Products

Legal name

Magnum Venus Products, Inc.

Website

https://mvpind.com

Company type

Private

Founded year

1938

Operating status

Operating

Headcount range

101–250 employees

Short description

Magnum Venus Products is a family-owned Tennessee manufacturer of fluid movement and production equipment — pumps, spray systems, filament winders, and closed mold injection systems — serving composites and adhesives manufacturers across marine, wind, aerospace, oil and gas, pool and bath, infrastructure, and transportation industries globally.

Ownership category

akta.pro rank

Product category

Industrial Composite Manufacturing Equipment

NAICS

Fluid Power Pump and Motor Manufacturing (333996), Measuring, Dispensing, and Other Pumping Equipment Manufacturing (333914)

SIC

Pumps & Pumping Equipment (3561)

akta.pro primary industry

Pump & Compressor Packages (Skids, Booster Sets) (IMAHANAG)

akta.pro secondary industry

Pneumatic Components (FRLs, Cylinders, Valves) (IMAHAGAC)

Keywords

• Composite manufacturing equipment
• Fluid movement systems
• Metering mixing equipment
• Closed mold production
• Filament winding machinery

Headquarters

HQ city

Knoxville

HQ country

United States

HQ region

North America

Offices5 records

Markets served

GTM type

B2B

Offering type

Hardware or Manufacturing

Cost components

Operations, Supply Chain, Personnel, Technology or R&D, Marketing or Sales, Infrastructure

Revenue model

1. Equipment Sales: MVP generates revenue through the sale of industrial fluid movement and production equipment including pumps, spray guns, proportioning systems, injection systems, and filament winding machines. Equipment is sold directly in North America and through distributors internationally.
2. Parts and Accessories: Sales of replacement parts, accessories, and consumables for the installed base of MVP equipment, including seals, fluid sections, guns, heaters, and monitoring systems.
3. Technical Service and Support: MVP provides technical service, training, and support for customers, including product training courses, on-site demonstrations, and ongoing technical assistance through their CARE (Customer Assistance, Resources, and Education) program.

Go-to-market motion3 records

Distribution channels4 records

Marketing channels10 records

Core offering

Magnum Venus Products designs and manufactures fluid movement and production equipment used by industrial customers to meter, mix, dispense, and apply composites and adhesives. The portfolio spans proportioning pumps, chop/wet-out systems, gelcoat spray systems, closed-mold injection systems, adhesive systems, applicator spray guns, filament winding machines, heaters, material monitors, and mixers/agitators, sold via direct sales in North America and through an international distributor network. MVP also operates MVP Motion, an automation line for filament winding, reciprocators, and customized production cells, and provides technical service and training through its CARE program.

Product overview

Magnum Venus Products (MVP) is a manufacturer of fluid movement and production solutions for industrial applications in composites and adhesives markets. The company offers a comprehensive portfolio of equipment organized by industry (Aerospace, Infrastructure, Marine, Oil & Gas, Pool and Bath, Transportation, Wind) and process/category. The core product lines include: metering and mixing systems (Universal Proportioner, MicroPro, 1:1 Patriot Duo, 1:1 UPS Duo) for precise material dispensing; chop/wet-out systems (Patriot and Pro series) for fiber reinforced plastic production; gelcoat systems (Patriot Gelcoat, Patriot Multi-Color) for surface finishing; injection systems (Patriot Innovator) for closed mold applications; adhesive systems (10:1) for bonding; and supporting accessories including heaters, material monitors, catalyst alarms, and mixers. MVP also offers automation solutions through MVP Motion for filament winding and reciprocators. The products work together as integrated production solutions where metering pumps feed material through heated hoses to application guns, with monitoring systems ensuring precise ratios throughout the process.

Differentiator

Problem solved

Functional benefit

Brands

• MVP Motion: Delivers industry-leading automation solutions for filament winding, reciprocators, and fully customized production cells
• Patriot
• Flex Molding Process
• FIT System

Products and services

• 1:1 Patriot Duo System Purpose-built proportioning system that mixes and dispenses multiple 1:1 volumetric materials via a gravity feed that eliminates the need for a ram pump. Targets composites and adhesives manufacturers using 1:1 fixed ratio fluid pumps with Patriot precision metering for urethane, epoxy, silicone, or polyester materials in coatings, adhesives, casting, and laminating applications.
• Universal Proportioner System Air motor-driven heavy duty proportioner with adjustable rocker arm linkage and adjustable ratio range for epoxy and urethane laminating resins and coatings. Serves composites manufacturers needing a wide application range across varied flow rates and mix ratios.
• MicroPro Proportioner System Low flow rate proportioner designed for metering epoxy, urethane, and silicone materials in spray, splatter, pour, RTM, and table-top proportioning applications. Suited to precision composites and adhesives work where small, controlled dispense volumes are required.
• Patriot Innovator Injection Systems Pneumatic and PLC-controlled pumping systems with fully automated controls for closed mold composite applications. Designed to inject polyester, vinylester, and methacrylate resins at controlled pressures with adjustable catalyst ratio, supporting RTM and LRTM production.
• Patriot Chop/Wet-Out System Precision FRP chop/wet-out system with rugged construction and rapid access design for easy maintenance, delivering catalyst-to-resin variance of 1% or less. Used for FRP production in marine, transportation, and industrial applications.
• Patriot Gelcoat Systems Highly accurate gelcoat application system with catalyst-to-resin variance of less than 1%, targeted at composites manufacturers that require precision surface finishing for marine, pool and bath, transportation, and other gelcoated FRP parts.
• Patriot Multi-Color Gelcoat System Multi-color gelcoat system that can feed up to six colors as standard and provides highly accurate ratio control of ±0.1%, enabling manufacturers to switch gelcoat colors without manual changeover.
• 10:1 Adhesive Systems Accurate metering systems with double-acting piston pumps, stainless steel components, and modular rapid access design for 10:1 mix ratio adhesive applications. Configured to dispense methacrylate and similar 10:1 adhesives used in transportation, RV, tank, and structural bonding applications.
• Pro Guns Internal mix, low pressure spray guns designed for comfortable operation and significantly reduced emissions and porosity versus traditional fiberglass spray guns, used by FRP laminators across MVP's served industries.
• Talon Guns Lightweight applicator guns with advanced valve technology including AirCat Mono-Valve and Dynamic Discharge Valve designs, available in internal and external mix configurations for FRP and gelcoat application.
• Air Trigger Guns Pneumatic trigger gun line including the ATG-3500 Gelcoat Gun, ATC-4000 Chopper Gun, and ITD-3500 Reversible Tip Gun, used for controlled and precise application of gelcoat, chop, and FRP materials.
• LRTM Accessories and Seals Full line of LRTM production accessories and seals including the Turbo Autosprue, Pneumatic PV Sensor, pipe connectors, vacuum connectors, and seal profiles designed for closed mold composite production.
• Material Monitors CB-6000 and CB-8000 Materials Monitors that interface with MVP pumping systems to indicate resin flow, chopper glass rate, and gelcoat flow, providing real-time production visibility for composites manufacturers.
• Cat Sense Pneumatically powered catalyst flow alarm with no electrical components or batteries required, providing audible alerts when catalyst flow drops below preset thresholds to prevent off-ratio production in FRP operations.
• Catalyst Alarm Signals if the catalyst pump fails to deliver the full portion of catalyst to the gun, ensuring accurate mix ratio on every shot. Certified by NRTLs for use in explosive atmospheres.
• Clean Flow Heater Low to medium output gelcoat heater designed for higher flow rates with tight temperature-change control and easy maintenance, supporting MVP gelcoat spray and proportioning systems in production environments.
• Mixers and Agitators Complete line of mixing equipment for drums, pails, and totes that mixes composites and adhesives materials consistently while minimizing maintenance time.
• MiniLink Hydraulic System Hydraulic meter and cylinder system targeted at composite pultrusion manufacturers, delivering extremely consistent mix and meter at low flow rates for pultruded profiles.
• MVP Motion Automation Solutions Industry-leading automation solutions for filament winding machines, reciprocators, and fully customized production cells, serving composites manufacturers that need high-volume, repeatable composite part production with reduced labor.

Quantifiable outcome

• Reduced catalyst-to-resin variance to less than 1% compared to 25-30% for competitor systems
• +6 more outcomes

Named customers15 records

Segments7 records

Ideal customer profiles1 record

Technology focussed No

API detail

Has API

No

API docs

API detail

Core technology

AI maturity

App detail

Feature12 records

Partnerships

Seven partnerships are on record, tiered core, strategic and minor.

• Minepro SAScoreChannel Partner/ Reseller/ Distributor · 27 July 2020MVP's distributor in Colombia responsible for coordinating engineering, sales, and technical aspects of LRTM projects including equipment, process fine-tuning, and customer support for the Colombian market.
• KG EnterprisescoreChannel Partner/ Reseller/ DistributorMVP's distributor for Finland that hosted LRTM training courses to demonstrate latest updates in LRTM techniques and support customers in meeting emission standards.
• MVP-EspañacoreChannel Partner/ Reseller/ DistributorMVP's Spanish distributor operation that provided technicians for intensive LRTM training workshops conducted at customer facilities in Spain.
• MVP-AustraliacoreChannel Partner/ Reseller/ DistributorMVP's Australian distributor that worked with Freedom Tanks to configure MVP 10:1 Adhesive Systems for dispensing Loctite H4800 Speedbonder materials in tank manufacturing.
• MVP-EuropecoreChannel Partner/ Reseller/ DistributorMVP's European distributor network that provided Micris with LRTM training demonstrations and ongoing equipment support for radome manufacturing.
• ANDERCOLstrategicStrategic or Co-development PartnerColombian composites chemical manufacturer that formulated optimal low-viscosity resin for the Bogota water utility dome project, and provided early support with key design elements of the LRTM process in collaboration with MVP and Minepro.
• LoctiteminorStrategic or Co-development PartnerMaterials partner whose H4800 Speedbonder methacrylate adhesive was configured for use with MVP 10:1 Adhesive Systems at Freedom Tanks, requiring custom adaptations to handle the 10:1 mix ratio material.

Scale indicators3 records

Recent moves6 records

Expansion highlights5 records

Direct peers

• Graco Inc. Graco is a global leader in fluid handling equipment for industrial and contractor applications, with a product portfolio that directly overlaps MVP's metering, dispensing, and spray equipment. Both companies serve customers needing precise fluid movement, though Graco is a much larger publicly listed company with broader end-market reach.
• Nordson Corporation: Nordson manufactures precision dispensing and test equipment for adhesives, coatings, and sealants, overlapping directly with MVP's adhesive systems and proportioning equipment. Both serve industrial manufacturing customers requiring precise fluid application, with Nordson being a larger public company with broader automation and digital offerings.
• Carlisle Fluid Technologies: Carlisle Fluid Technologies (Binks, DeVilbiss, MS, and Ransburg brands) manufactures spray finishing and fluid handling equipment, with direct overlap to MVP's spray guns, gelcoat systems, and composite application equipment. Comparable in customer base across industrial finishing and composite manufacturing.
• RAMPF Group: RAMPF manufactures mixing and dispensing systems for polymers, polyurethanes, and silicones, with a product portfolio that directly overlaps MVP's proportioning and metering systems. Both serve industrial customers requiring precise multi-component fluid mixing and dispensing for composites and related applications.
• Cannon Group: Cannon (Cannon Afros, Cannon Ergos, Cannon Tipco) designs and manufactures equipment and process technology for polyurethane, composites, and elastomers, with a direct overlap to MVP's composite manufacturing equipment and metering systems. Serves similar industrial customers in automotive, construction, and composites.
• Hennecke GmbH: Hennecke manufactures high-pressure metering machines and production systems for polyurethane, with overlap to MVP's proportioning, injection, and closed-mold systems. Both serve industrial customers in composites, automotive, and construction requiring precise multi-component dispensing.
• KraussMaffei: KraussMaffei manufactures machinery and systems for plastics and rubber processing, including composite manufacturing equipment. Its Reaction Process Machinery division overlaps with MVP's metering, mixing, and closed-mold systems for composites, serving similar industrial customers.
• Ashby Cross Company: Ashby Cross manufactures resin dispensing and metering equipment for composites, adhesives, and potting applications, with products directly comparable to MVP's proportioner and adhesive systems. A smaller, more specialized peer focused specifically on multi-component resin dispensing.

Broad incumbents

• Illinois Tool Works (ITW): ITW is a diversified industrial manufacturer with businesses spanning adhesives, specialty dispensing, and finishing equipment. ITW's broad portfolio includes segments comparable to MVP's composites application equipment, though as part of a much larger conglomerate with many other industrial businesses.
• Henkel AG & Co. KGaA: Henkel is a global leader in adhesives, sealants, and functional coatings, with an Adhesive Technologies business that both supplies materials for the composite industry and offers integrated dispensing solutions. Comparable as a broad incumbent in the adhesives and composites equipment ecosystem.

Market position

Strengths4 records

Weaknesses5 records

Competitive moat4 records

Key risks5 records

Key highlights7 records

Customer concentration

• Xx.com/mvpind
• YouTubeyoutube.com/channel/UCAT1fTQOoVC-EkPk2hAbTlA?
• Facebookfacebook.com/magnumvenusproducts
• LinkedInlinkedin.com/company/magnum-venus-plastech

Revenue estimate

Valuation estimate

Number of profiles

Profiles3 records

Funding overview

Funding rounds

Investors

Funding detail is available on the Subscription and Enterprise plan.Contact sales →

M&A

Investments

M&A and investment is available on the Subscription and Enterprise plan.Contact sales →

Frequently asked questions about Magnum Venus Products