Van Blarcom Closures
Van Blarcom Closures (VBC Packaging) is a Brooklyn-based, family-owned manufacturer of Saf-Cap™ push-down-and-turn child-resistant plastic closures, serving pharmaceutical and household-chemical manufacturers with FDA- and CPSC-compliant packaging since 1972.
- Company typePrivate
- Founded1947
- HeadquartersBrooklyn, United States
- Headcount101–250
- GTM typeB2B
- OfferingHardware or Manufacturing
What Van Blarcom Closures does
Van Blarcom Closures (VBC), also doing business as VBC Packaging, is a family-owned Brooklyn, NY manufacturer specializing in child-resistant (CR) plastic closures and metal can fitments. The Scuderi family has continuously manufactured closures since 1924, with VBC incorporated in 1947; the company entered CR packaging in 1972 following the Poison Prevention Packaging Act and now generates over 90% of revenue from the registered Saf-Cap™ line of two-piece push-down-and-turn closures, sold in sizes from 20mm to 70mm. The portfolio spans six SKUs—Saf-Cap I (the senior-friendly design that has been validated by the U.S. CPSC), Saf-Cap I Dropper, Saf-Cap III, Saf-Cap III Pictorial, Saf-Cap III-A, and Saf-Cap III-A Pictorial—engineered for pharmaceutical and household-chemical end markets and tested for compliance with 16 C.F.R. Part 1700 and FDA Drug Master File #5828 Type III requirements.
The company's technology rests on plastic injection molding and assembly of two-piece CR closures, supported by an in-house tool design and maintenance department and a 24/7 Brooklyn plant. Operational differentiation is enhanced by a natural-gas cogeneration facility that converts waste heat into process cooling, plus an ISO9002-aligned quality program governed by internal SPC auditing. The wholly-owned Johnson-VBC subsidiary supplies custom closure lining and assembly equipment and offers contract lining services, extending the Saf-Cap™ franchise into installed equipment and toll manufacturing. Saf-Cap™ I was independently validated for the U.S. Consumer Product Safety Commission in 1988 as the most consumer-friendly CR design, and the results were used as a reference for the present CR packaging regulations—giving VBC durable regulatory standing in the segment.
VBC operates a sales-led, quote-based B2B go-to-market with multi-year contracts, reaching customers via phone (800-875-3810), email ([email protected]), and direct sales. Pricing is not publicly disclosed. The customer base is concentrated in two regulated verticals: pharmaceutical manufacturers (primary) requiring Drug Master File-compliant CR closures, and household chemical manufacturers (secondary) requiring PPPA compliance. The company is privately held with no institutional investor or public-market footprint, with 101–250 employees, and currently markets exclusively in the United States while extending pictorial-instruction SKUs into international contexts.
Van Blarcom Closures firmographics
Firmographics- Name
- Van Blarcom Closures
- Legal name
- Van Blarcom Closures Inc.
- Website
- https://vbcpkg.com
- Company type
- Private
- Founded year
- 1947
- Operating status
- Operating
- Headcount range
- 101–250 employees
- Short description
- Van Blarcom Closures (VBC Packaging) is a Brooklyn-based, family-owned manufacturer of Saf-Cap™ push-down-and-turn child-resistant plastic closures, serving pharmaceutical and household-chemical manufacturers with FDA- and CPSC-compliant packaging since 1972.
- Ownership category
- akta.pro rank
Van Blarcom Closures industry classification
Industry- Product category
- Child-Resistant Packaging Closures
- NAICS
- All Other Plastics Product Manufacturing (326199), Packaging Machinery Manufacturing (333993), Medical Equipment and Supplies Manufacturing (33911)
- SIC
- Plastics Products, Nec (3089)
- akta.pro primary industry
- Child-Resistant Closures (CRC Caps, Push-and-Turn, Squeeze-and-Turn) (IMALANAC)
- akta.pro secondary industries
- Child-Resistant Closures (CRC) (IMALALAI), Closure Components & Inserts (Orifices, Plugs, Gaskets, Balls) (IMALALAN), Tamper-Evident Closures (TE Caps, Breakaway Bands, Flip-Tops) (IMALANAB), Tamper-Evident Closures & Bands (IMALALAJ)
Keywords
Where Van Blarcom Closures is headquartered
LocationHeadquarters
- HQ city
- Brooklyn
- HQ country
- United States
- HQ region
- North America
Offices1 record
Markets served
Van Blarcom Closures business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Operations, Personnel, Supply Chain, Technology or R&D, Infrastructure, Others
Revenue model
- Closure and Fitment Product Sales: Manufacturing and selling child-resistant closures and metal can fitments. Saf-Cap™ closures account for over 90% of VBC's total business. Products are physical goods sold directly to customers in pharmaceutical, household chemical, and related industries requiring child-resistant packaging.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Other | Multi-year contract | Custom quote-based pricing for all product sizes and configurations |
Go-to-market motion1 record
Distribution channels1 record
Marketing channels2 records
Van Blarcom Closures product offering
Product offeringCore offering
Van Blarcom Closures (VBC) manufactures child-resistant two-piece push-down-and-turn plastic closures (the Saf-Cap™ product line) and metal can fitments. Products are sold to pharmaceutical and household chemical manufacturers that need child-resistant packaging to comply with the Poison Prevention Packaging Act. Saf-Cap™ closures account for over 90% of VBC's total business. The company also produces specialty molded products and, through its Johnson-VBC subsidiary, custom closure lining and assembly machinery.
Product overview
Van Blarcom Closures (VBC) is a manufacturer of child-resistant closures and metal can fitments. The core product family is the Saf-Cap™ line of two-piece push-down-and-turn child-resistant closures, comprising six variants: Saf-Cap™ I (all-plastic, senior-friendly), Saf-Cap™ I Dropper (bulb/pipette assembly variant), Saf-Cap™ III (low-profile, cost-optimized), Saf-Cap™ III Pictorial (with pictorial instructions), Saf-Cap™ III-A (enhanced robustness), and Saf-Cap™ III-A Pictorial (III-A design with pictorial instructions for international markets). Saf-Cap™ closures account for over 90% of VBC's total business. The company also operates Johnson-VBC, a subsidiary providing custom closure lining and assembly equipment, and maintains an in-house tool department for designing, building, and maintaining manufacturing tools.
Differentiator
Problem solved
Functional benefit
Brands
- Saf-Cap™: Two-piece child resistant closure product line including Saf-Cap I, Saf-Cap III, Saf-Cap III-A, and related dropper closures with push-down-and-turn mechanism
- Johnson-VBC
Products and services
- Saf-Cap™ I All-plastic, two-piece push-down-and-turn child-resistant closure with embossed opening instructions on the outer cap, large side wall ribs, and a full retention ring inner cap. Demonstrated through independent government-sponsored testing to be the most senior-friendly design in the industry, exceeding 1995 Child Resistant test criteria. Available in sizes 20mm–53mm. Used by pharmaceutical and household chemical manufacturers for child-resistant packaging of medications and hazardous products.
- Saf-Cap™ I Dropper Child-resistant dropper closure using the same patented design as the standard Saf-Cap™ I but modified to accept a bulb/pipette assembly for dropper applications. Available in sizes 20mm, 22mm, 24mm, and 28mm. For pharmaceutical and liquid product manufacturers requiring child-resistant dropper dispensing.
- Saf-Cap™ III Low-profile two-piece child-resistant closure with a trim, neat appearance and fine ribbed pattern along the side. Features 'Save A Child' slogan with opening instructions on top of the closure. Lower cost achieved through design improvements and cutting-edge manufacturing techniques.
- Saf-Cap™ III Pictorial Low-profile two-piece child-resistant closure with pictorial opening instructions for international markets. Available in sizes 24mm, 28mm, 33mm, and 38mm. Lower cost achieved through design improvements and cutting-edge manufacturing techniques.
- Saf-Cap™ III-A Two-piece child-resistant closure combining the design and manufacturing improvements of Saf-Cap™ III with the robust nature of Saf-Cap™ I. Push-down-and-turn mechanism with finer ribs than Saf-Cap™ I. Available in sizes 22mm–70mm. Created VBC's largest growth period in nearly 60 years.
- Saf-Cap™ III-A Pictorial Two-piece child-resistant closure combining design improvements of Saf-Cap™ III with the robustness of Saf-Cap™ I. Features pictorial opening instructions ('Close Tightly', 'Push Down and Turn') on the outer rim and Saf-Cap™ III child-resistant design on the sides. Pigment polypropylene overcap with natural polypropylene inner cap. Available in sizes 24mm–70mm. Filed under FDA Drug Master File #5828, Type III.
- Johnson-VBC Closure Lining and Assembly Equipment Through wholly-owned subsidiary Johnson-VBC, VBC offers an extensive line of custom-designed and built closure lining and assembly equipment, plus economic closure lining services for companies without the capacity or capability to perform these functions in-house. Johnson-VBC has operated for three generations.
Quantifiable outcome
- Saf-Cap™ I demonstrated as most consumer-friendly design in independent study for U.S. Consumer Products Safety Commission in 1988
- +1 more outcomes
Companies that use Van Blarcom Closures
Customer profileSegments2 records
Ideal customer profiles2 records
Van Blarcom Closures technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature6 records
Van Blarcom Closures partnerships and signals
Strategic signalPartnerships
One partnership is on record.
- Johnson-VBCcoreJohnson-VBC is a subsidiary of VBC, operating as a packaging machine company. It offers an extensive line of custom designed and built closure lining and assembly equipment. The company has thrived for three generations and focuses on innovation, competitive pricing, quality and service. J-VBC also provides economic closure lining services for companies without the capacity or capability to perform on their own.
Scale indicators3 records
Recent moves6 records
Expansion highlights6 records
Van Blarcom Closures competitors and assessment
Company assessmentDirect peers
- Rieke Packaging Systems: Rieke is a direct competitor in child-resistant and specialty dispensing closures, producing push-down-and-turn and other CR mechanisms serving pharmaceutical, household chemical, and personal care markets globally.
- Drug Plastics Group: Drug Plastics Group manufactures plastic bottles and closures for the pharmaceutical industry, including child-resistant closures — a directly comparable product portfolio to VBC's pharmaceutical-targeted Saf-Cap line.
- Mold-Rite Plastics: Mold-Rite Plastics produces child-resistant and standard closures for pharmaceutical, nutraceutical, and personal care markets, competing head-to-head with VBC in plastic CR closure manufacturing.
- Weener Plastics: Weener Plastics is a global manufacturer of dispensing closures and roll-on balls, with strong pharmaceutical and personal care customer overlap and CR closure offerings similar to VBC's portfolio.
- O.Berk Company: O.Berk is a specialty packaging distributor and manufacturer offering child-resistant packaging solutions, including CR closures for pharmaceutical and cannabis markets — directly competing with VBC.
Broad incumbents
- AptarGroup (Seaquist Closures): Aptar is a global dispensing and packaging solutions leader, with its Closures division directly competing in pharmaceutical and consumer CR closures. Aptar's scale, global footprint, and broader portfolio make it the most significant competitor to VBC.
- Silgan Dispensing Systems: Silgan Dispensing (formerly Albea Dispensing) produces dispensing closures and pumps, including child-resistant variants for personal care and pharmaceutical applications — overlapping with VBC's CR closure portfolio.
- Berry Global (Closure Systems International): Berry Global's Closure Systems International division produces child-resistant and dispensing closures for food, beverage, personal care, and pharmaceutical markets, competing with VBC in the CR pharmaceutical segment.
Others
- Berlin Packaging: Berlin Packaging is a large hybrid packaging supplier offering containers, closures, and CR components across pharmaceutical, household, and chemical markets — serving the same customer base as VBC with broader portfolio breadth.
Emerging players
- Cannabis CR Packaging Suppliers (e.g., Calyx Containers): Cannabis-focused CR packaging suppliers serve an emerging regulated end-market where VBC's CR technology is highly applicable. These players represent both a competitive threat in cannabis and a potential customer/distribution channel.
Market position
Strengths4 records
Weaknesses4 records
Competitive moat6 records
Key risks6 records
Key highlights7 records
Customer concentration
Van Blarcom Closures compliance and trust
Trust signalCompliance3 records
Van Blarcom Closures financial estimates
Financial estimateRevenue estimate
Valuation estimate
Van Blarcom Closures leadership team
Management profileNumber of profiles
Profiles1 record
Van Blarcom Closures subsidiaries and ownership
Company hierarchySubsidiaries1 record
Van Blarcom Closures funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Van Blarcom Closures M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Van Blarcom Closures
What does Van Blarcom Closures do?
Van Blarcom Closures (VBC) manufactures child-resistant two-piece push-down-and-turn plastic closures (the Saf-Cap™ product line) and metal can fitments. Products are sold to pharmaceutical and household chemical manufacturers that need child-resistant packaging to comply with the Poison Prevention Packaging Act. Saf-Cap™ closures account for over 90% of VBC's total business. The company also produces specialty molded products and, through its Johnson-VBC subsidiary, custom closure lining and assembly machinery.
Is Van Blarcom Closures a public or private company?
Van Blarcom Closures is a private company. It is classified as family owned and is currently operating.
When was Van Blarcom Closures founded?
Van Blarcom Closures was founded in 1947. It employs 101 to 250 people.
Where is Van Blarcom Closures based?
Van Blarcom Closures is headquartered in Brooklyn, United States, in the North America region.
How does Van Blarcom Closures make money?
One revenue line is on record: closure and Fitment Product Sales.
Who are Van Blarcom Closures's main competitors?
Direct peers on record are Rieke Packaging Systems, Drug Plastics Group, Mold-Rite Plastics, Weener Plastics and O.Berk Company. Broad incumbents are AptarGroup (Seaquist Closures), Silgan Dispensing Systems and Berry Global (Closure Systems International). Berlin Packaging is listed as an others. Cannabis CR Packaging Suppliers (e.g., Calyx Containers) is listed as an emerging player.
Does Van Blarcom Closures have an API?
No public API is recorded for Van Blarcom Closures.
What industry is Van Blarcom Closures in?
Van Blarcom Closures's product category is Child-Resistant Packaging Closures. Its primary akta.pro industry code is IMALANAC, Child-Resistant Closures (CRC Caps, Push-and-Turn, Squeeze-and-Turn), with a secondary code of IMALALAI, Child-Resistant Closures (CRC). Its NAICS code is 326199 and its SIC code is 3089.