SOLVIK INTERNACIONAL
Solvik Internacional is a 47-year-old Mexican compressed air treatment specialist that combines proprietary German manufacturing of the Ultrafilter brand with exclusive Mexican representation of nine German industrial brands (BEKO, MANN+HUMMEL, KELTEC, CS-Instruments, 2G Energy, DÜRR-Thermea, BOGE), serving industrial customers through four nationwide branches via equipment sales, maintenance services, spare parts, and training.
- Company typePrivate
- Founded1978
- HeadquartersTlalnepantla de Baz, Mexico
- Headcount11–50
- GTM typeB2B
- OfferingHardware or Manufacturing
What SOLVIK INTERNACIONAL does
SOLVIK INTERNACIONAL (legal name: Compañía Solvik Internacional S.A. de C.V.) is a privately held Mexican industrial company founded in 1978 and headquartered in Tlalnepantla de Baz, Estado de México, specializing in compressed air treatment and purification. The company's core offering spans the full compressed air value chain — compressors, filtration elements and housings, refrigerated and adsorption dryers, condensate management, and measurement instrumentation — augmented by industrial energy solutions including cogeneration systems and CO2-refrigerant heat pumps. Its technology base combines proprietary manufacturing of ULTRAFILTER-brand dryers and filters in Germany (since 2016) with exclusive Mexican representation of multiple established German brands including BEKO, MANN+HUMMEL, KELTEC, CS-Instruments, 2G Energy, DÜRR-Thermea, and BOGE. Patented and proprietary technologies include the everMatic control system, BEKO VarioFlow hot-gas-bypass valves, mass thermal heat exchanger dryers delivering >80% energy savings, and PREMIUM+ nanofiber filter elements claiming 99.99999% efficiency with up to 70% energy cost reduction. The company serves industrial manufacturing customers across Mexico (with secondary distribution to other countries) through four branch locations operating since 1999, an enterprise field-sales motion, authorized distribution partnerships, and recurring service and spare-parts revenue. Service offerings include preventive and corrective maintenance for compressors and dryers across multiple OEM brands (Atlas Copco, Gardner Denver, Sullair, Quincy, Kaeser, Ingersoll Rand, CompAir), air quality measurement compliant with ISO 8573-1 (2010) and ISO 22000, and a training center with PLC Siemens Simatic S7 test cabinets. Pricing is quote-based across hardware, services, spare parts, and training, consistent with project-driven industrial sales rather than transactional or SaaS distribution.
SOLVIK INTERNACIONAL firmographics
Firmographics- Name
- SOLVIK INTERNACIONAL
- Legal name
- Compañía Solvik Internacional S.A. de C.V.
- Website
- https://solvik-int.com
- Company type
- Private
- Founded year
- 1978
- Operating status
- Operating
- Headcount range
- 11–50 employees
- Short description
- Solvik Internacional is a 47-year-old Mexican compressed air treatment specialist that combines proprietary German manufacturing of the Ultrafilter brand with exclusive Mexican representation of nine German industrial brands (BEKO, MANN+HUMMEL, KELTEC, CS-Instruments, 2G Energy, DÜRR-Thermea, BOGE), serving industrial customers through four nationwide branches via equipment sales, maintenance services, spare parts, and training.
- Ownership category
- akta.pro rank
SOLVIK INTERNACIONAL industry classification
Industry- Product category
- Compressed Air Treatment Equipment
- NAICS
- Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing (333415), Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing (333413), Air and Gas Compressor Manufacturing (333912), Refrigeration Equipment and Supplies Merchant Wholesalers (423740)
- SIC
- Air-Cond & Warm Air Heatg Equip & Comm & Indl Refrig Equip (3585), Refrigeration & Service Industry Machinery (3580), Industrial & Commercial Fans & Blowers & Air Purifing Equip (3564), Wholesale-Industrial Machinery & Equipment (5084)
- akta.pro primary industry
- Pneumatic Air Preparation & Distribution (FRL assemblies, manifolds, air headers) (IMAHAGAD)
- akta.pro secondary industries
- Compressors, Refrigeration Components & Condensing Units (IMADANAG), Industrial Drying & Evaporation Equipment (Dryers, Evaporators, Crystallizers) (IMAHAEAD), Pump & Compressor Packages (Skids, Booster Sets) (IMAHANAG), HVAC, Water Heaters & Indoor Air Quality Distribution (CRAOAFAJ)
Keywords
Where SOLVIK INTERNACIONAL is headquartered
LocationHeadquarters
- HQ city
- Tlalnepantla de Baz
- HQ country
- Mexico
- HQ region
- Latin America
Offices1 record
Markets served
SOLVIK INTERNACIONAL business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Supply Chain, Personnel, Operations, Marketing or Sales, Technology or R&D
Revenue model
- Compressed Air Treatment Equipment Sales: Sale of compressors, filters, dryers, instrumentation, condensate management systems, and related hardware. Products include own-brand Ultrafilter dryers and filters manufactured in Germany, as well as represented brands BOGE, BEKO, KAIRGEN, 2G Energy, DÜRR, and CS-Instruments.
- Maintenance and Technical Services: Preventive and corrective maintenance services for compressors, refrigeration dryers, regenerative dryers, and full compressed air systems. Services include measurement of air quality parameters (dew point, oil content, particles, pressure, temperature), PLC-based training with simulators, and installation services.
- Spare Parts and Replacement Elements: Supply of replacement filter elements, dryer components, seals, valves, and other spare parts for all equipment brands supported. Broad stock of equipment and parts maintained in Mexico with weekly shipments from Germany.
- Training and Certification Services: Training services delivered through company's training center, capacitating both own personnel and customers. Includes theoretical and practical training using failure simulators and PLC test cabinets (Siemens Simatic S7).
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Other | Multi-year contract | All products and services are quote-based, not publicly priced. |
Go-to-market motion1 record
Distribution channels3 records
Marketing channels4 records
SOLVIK INTERNACIONAL product offering
Product offeringCore offering
Solvik Internacional sells compressed air treatment equipment (compressors, filters, dryers, condensate management systems, instrumentation) and provides maintenance, air quality measurement, and training services. The company acts as exclusive Mexican distributor for multiple German brands (Ultrafilter, BEKO, MANN, KELTEC, CS-Instruments, 2G Energy, Dürr, BOGE) and has manufactured its own Ultrafilter-brand dryers and filters in Germany since 2016. It also distributes renewable energy systems including cogeneration plants and industrial heat pumps.
Product overview
SOLVIK INTERNACIONAL is an industrial compressed air treatment company founded in 1978, operating as both a manufacturer and exclusive distributor of German-brand products. The product portfolio centers on compressed air systems (compressors, filters, dryers, condensate treatment, instrumentation) and renewable energy solutions (cogeneration and heat pumps). The core offering spans: screw and piston compressors (KAIRGEN, BOGE brands), filter elements and housings for compressed air/process/compressor applications (ULTRAFILTER brand with PREMIUM+ nanofiber technology), desiccant dryers (PurgeDRY SOPD/HL-M, EASIDRY, SERVODRY) and refrigerated dryers (FRIDGEDRY, Ultratroc BRISA/Boreas, BEKO Drypoint), condensate management (ÖWAMAT, BEKOSPLIT, BEKOMAT), instrumentation (CS-Instruments hygrometers, flow meters, leak detectors), treatment packages (BEKOKAT oil-free, BEKOBLIZZ coolers), and renewable energy systems (2G ENERGY cogeneration, DÜRR-Thermea heat pumps). Services include maintenance, air quality measurement, and training. The company maintains its own production of dryers and filters in Germany under the ULTRAFILTER brand since 2016.
Differentiator
Problem solved
Functional benefit
Brands
- Solvik-Ultrafilter: Primary brand for air filtration and purification products including filters, dryers, compressors, and instrumentation.
Products and services
- KAIRGEN Lubricated Screw Compressors Screw air compressors with belt-drive, direct-drive, and variable speed drive (VSD) options ranging from 5.5HP to 350HP. Includes integrated air treatment center with dryer and filtration packages, with VSD units delivering up to 35% energy savings.
- BOGE Screw Compressors Screw compressors available in lubricated and oil-free variants with capacities from 42 to 1815 cfm and power range 30-480 HP, serving small workshops to large industrial facilities.
- BOGE High-Pressure Compressors High-pressure compressors including BOGE FLEXPET PET system, booster compressors, and piston compressors for elevated pressure applications up to 40 bar.
- BOGE K 15 Oil-Free Piston Compressors Oil-free piston compressor with dual opposing rod units in four-cylinder configuration, maximum pressure 40 bar, flow 780-1296 l/min.
- EVERSEP-WS Cyclonic Water Separator Cyclonic separator for removing water from compressed air and gases, with 0-9000 scfm capacity and 1-16 bar pressure rating, using a three-part aluminum housing with cyclonic element retaining particles and liquids while maintaining low differential pressure.
- F-AG and SG Series Compressed Air Filter Housings Industrial high-performance filter housings with wall-mounting flexibility, intelligent condensate drainage, and energy consumption monitoring.
- PE Polyethylene Filter Elements Sintered polyethylene filter elements for particle retention in air and compressed gases with absolute retention rating and 100% efficiency.
- AK Activated Carbon Filter Elements Activated carbon filter elements for removing oil aerosols, odors, and hydrocarbons from compressed air, achieving residual oil content less than 0.003 ppm.
- PREMIUM+ Nanofiber Filter Elements (FF, MF, SMF) High-performance nanofiber filter elements with 99.99999% efficiency, 450% larger filtration area, up to 70% energy cost reduction, and three-stage filtration (1 micron, 0.5 micron, 0.01 micron) using resin-free nanofiber non-woven media.
- P-SRF Sterile Depth Filter Elements High-efficiency depth filter with stainless steel internal and external support, >99.99998% retention at 0.01 microns, up to 100 re-sterilization cycles, FDA-compliant for food contact.
- P-BE Sterile Vent Filter Sterile vent filter for storage tanks with 95% void volume, hydrophobic depth medium, >99.999% retention at 0.01 microns, FDA compliant.
- P-GS Sintered Stainless Steel Filter Sintered stainless steel filter for steam, gases, and liquids with 1-25 micron retention rating, temperature range -20°C to 210°C, regenerable with ultrasound.
- Absolute Membrane Filters (PF-BEV, PF-PES, PF-PP) Absolute membrane filters for sterile filtration: PF-BEV (0.2-0.45 microns) for beverages and water, PF-PES (0.4-0.6 microns) for aqueous solutions, PF-PP (0.04-0.2 microns) for solvents and chemicals.
- Compressor Filters (Air, Oil, Air/Oil Separators) Complete range of compressor filters including air filters, oil filters, and air/oil separators compatible with Atlas Copco, Broomwade, Champion, CompAir, Gardner Denver, Ingersoll Rand, Kaeser, Quincy, Sullair, and other major brands.
- PurgeDRY SOPD Compact Desiccant Dryer Compact adsorption dryer with aluminum towers, capacity up to 110 m³/hr (65 scfm), dew point options of -20°C, -40°C, or -70°C, featuring everMatic control system for energy savings and non-electric switching valves.
- PurgeDRY HL-M Industrial Desiccant Dryer Industrial adsorption dryer with steel towers, capacity 35-5200 scfm, non-electric switching valves, stable dew points from -20°C to -70°C.
- OFA-S OILFREEPACK Purification Package Complete oil-free air purification package with six-stage treatment delivering ISO 8573-1:2010 Class 0.2.0 or optionally Class 0.1.0, including pre-filtration, adsorption drying, and post-filtration.
- EASIDRY HRE-ULTRADRY Heat-Regenerated Dryer Heat-regenerated adsorption dryer with modular design, capacity 300-35000 scfm, manufactured in Germany with high energy efficiency and corrosion-resistant galvanized piping.
- SERVODRY HRS-V Adsorption Dryer Adsorption dryer combining existing drying technologies with German-engineered components, featuring high operational safety, low energy costs, and pneumatically separated sensitive components.
- FRIDGEDRY FD Refrigerated Dryer Refrigerated dryer with dew point down to +3°C, compact design, 12-571 scfm capacity, operating pressure 1-16 bar.
- Thermal Mass Dryers (HPD/DE ETM) Patented high-efficiency heat exchangers with thermal mass technology matching dryer energy consumption to actual workload, achieving over 80% energy savings compared to conventional dryers.
- Ultratroc Boreas Variopulse DC/DV Refrigerated Dryer Energy-saving refrigerated dryer with Variopulse controller allowing compressor on/off operation for partial or full load, achieving 90% energy savings, capacity 10-7500 scfm.
- Ultratroc BRISA Refrigerated Dryer German-made refrigerated dryer with over 30-year service life, 0-100% load capacity, minimal pressure loss, capacity 5000-35000 scfm.
- BEKO Drypoint RA/RS HP Refrigerated Dryers BEKO refrigerated dryers featuring VarioFlow hot gas bypass valve technology for stable dew point with no maintenance and no freezing. Drypoint RA ranges 10-5000 scfm; Drypoint RS HP ranges 15-1750 scfm at 16-50 bar.
- CS-Instruments Measurement Line (DP, FA, VA, LD Series) Complete instrumentation line including dew point hygrometers (DP 400/500/510), flow meters (VA 500/520/550/570), ultrasonic leak detectors (LD 400), hydrocarbon/particle meters (0.001 mg/m³ sensitivity), and intelligent graphic recorders for compressed air and gas measurement.
- ÖWAMAT Oil-Water Separators Oil-water separators for treating compressed air condensate (99% water, 1% oil), capacity 1-8500 scfm, economically treating contaminated condensate on-site.
- BEKOSPLIT Oil-Water Separators Separators for treating emulsified condensate and industrial wastewater containing oil, capacity 15-160 L/hr, handling organic impurities, oils, fats, and solid particles.
- BEKOMAT Intelligent Automatic Condensate Drains Automatic intelligent condensate drains with loss-free operation, capacity 10-50000 scfm, pressure range 1-64 bar, recognized as an industrial standard worldwide for reliability and energy-efficient operation.
- 2G ENERGY AG Cogeneration Plants Cogeneration systems producing simultaneous electrical power (10kW-4000kW), heat up to +110°C, and cooling down to -7°C using biogas, natural gas, or fuel oil. Over 5,000 units deployed in 40+ countries with 42% electrical and 47% thermal efficiency.
- DÜRR-Thermea Industrial Heat Pumps Industrial heat pumps from 40kW to 2200kW for industrial, hotel, and hospital applications. Provides heating up to +110°C and simultaneous cooling down to -30°C using CO2 (R-744) refrigerant. Recovers 2/3 to 3/4 of energy used with payback period of approximately 3 years.
- BEKOKAT Oil-Free Air System 100% oil-free compressed air system achieving residual oil content as low as 0.001 mg/m³, capacity 35-705 scfm, pressure 1-16 bar, meeting the most demanding production process requirements.
- BEKOBLIZZ Compressed Air Cooler Low-temperature compressed air cooling system achieving +5°C, -35°C, or -40°C, capacity 7-425 scfm, reducing molding cycles, increasing blow molding capacity, and improving cooling times.
- Preventive and Corrective Maintenance Services Maintenance services for compressors, refrigerated and regenerative dryers including 2000, 4000, 6000, 8000 hour programs, supporting Atlas Copco, Gardner Denver, Sullair, Quincy, Kaeser and other major compressor brands.
- Air Quality Measurement Services Air quality measurement services evaluating dew point, relative humidity, residual oil content, particle concentration, pressure, and temperature. Complies with ISO 8573-1 (2010) and ISO 22000 standards.
- Technical Training and Certification Services Training delivered through the company's training center with failure simulators and PLC Siemens Simatic S7 test cabinets for theoretical and practical training of technicians and engineers on regenerative dryer maintenance and compressed air systems.
Quantifiable outcome
- Up to 70% reduction in energy costs with PREMIUM+ nanofiber filter elements
- +7 more outcomes
Companies that use SOLVIK INTERNACIONAL
Customer profileSegments5 records
Ideal customer profiles1 record
SOLVIK INTERNACIONAL technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature13 records
SOLVIK INTERNACIONAL partnerships and signals
Strategic signalPartnerships
Eleven partnerships are on record, tiered core and major.
- ULTRAFILTER MEXICANA SA de CVcoreSolvik has been the exclusive representative and distributor of Ultrafilter in Mexico since 1978. From 1985, Solvik introduced the Ultrafilter brand to the Mexican market. Since 2016, Solvik additionally has its own production of the Ultrafilter brand in Germany, creating a direct manufacturing relationship.
- Ultrafilter AG (Germany)coreOriginal German brand partner for compressed air filtration and drying technology. Solvik acts as exclusive Mexican representative. Since 2016, Solvik produces its own Ultrafilter-brand dryers and filters in Germany.
- EVERAIRcoreExclusive representation of EVERAIR products in Mexico, including EverSep-WS cyclonic water separators and EverMatic intelligent control systems for compressed air treatment.
- BEKO Technologies GmbH (Germany)coreExclusive representative of BEKO (Germany) products including Drypoint RA and RS refrigeration dryers, Bekomat intelligent automatic drains, BEKOKAT oil-free air systems, BEKOBLIZZ air coolers, BEKOSPLIT oil-water separators, and ÖWAMAT condensate treatment systems.
- MANN+HUMMEL (Germany)majorExclusive representative of MANN filter products in Mexico, covering industrial filtration solutions for compressed air and process applications.
- KELTEC (Germany)majorExclusive representative of KELTEC (Germany) compressed air treatment technology in Mexico, supporting the comprehensive product portfolio.
- CS-Instruments GmbH (Germany)coreExclusive representative of CS-Instruments GmbH (Germany) in Mexico. Products include DP series dew point hygrometers (DP 400, DP 500, DP 510), VA series flow meters (VA 500/520/550/570), LD 400 ultrasonic leak detectors, hydrocarbon/particle meters, and intelligent graphic recorders for compressed air measurement.
- 2G ENERGY AG (Germany)coreExclusive representative of 2G ENERGY AG (Germany) cogeneration systems in Mexico. Systems produce electrical power from 10kW to 4000kW, heat up to +110°C, and cooling down to -7°C using biogas, natural gas, or fuel oil. More than 5,000 units operating globally.
- DÜRR-Thermea GmbH (Germany)coreExclusive representative of DÜRR-Thermea GmbH (Germany) in Mexico, specializing in energy recovery and savings technology. Products include industrial heat pumps from 40kW to 2200kW for heating, cooling, and process thermal management using CO2 (R-744) refrigerant, with simultaneous heating and cooling capabilities.
- BOGE (Germany)coreExclusive representative of BOGE (Germany) compressors in Mexico. Product range includes screw compressors (lubricated and oil-free), high-pressure compressors for PET, piston compressors, and booster compressors. BOGE compressors have been validated from small workshops to large industrial facilities for over three decades.
- KAIRGENmajorRepresented compressor brand KAIRGEN, offering screw compressors (lubricated) with power range from 5.5HP to 350HP. Models include belt-drive, direct drive, and variable speed drive (VSD) units with up to 35% energy savings. Compact units with integrated air treatment packages also available.
Scale indicators7 records
Recent moves9 records
Expansion highlights5 records
SOLVIK INTERNACIONAL competitors and assessment
Company assessmentBroad incumbents
- Kaeser Compressors: Major global manufacturer of compressors and compressed air treatment equipment with established Mexican distribution. Overlaps with Solvik's BOGE/KAIRGEN compressor line and dryers/filter offerings, serving the same industrial customer base.
- Parker Hannifin: Diversified industrial manufacturer with significant compressed air filtration and drying product lines. Competes with Solvik's filter elements and refrigerated/desiccant dryers, particularly in food/pharma and high-purity applications.
- Atlas Copco: Global leader in compressors, vacuum solutions, and industrial air treatment with direct Mexican operations. Competes across Solvik's full product range including compressors, dryers, filters, and condensate management, but as a much broader portfolio player.
- Sullair: Established compressor manufacturer with full compressed air treatment portfolio. Overlaps with Solvik's compressor and downstream treatment equipment in industrial and oil-free application segments.
- CompAir: Manufacturer of oil-free and oil-lubricated compressors plus downstream air treatment equipment. Competes with Solvik's BOGE/KAIRGEN compressor and BEKOKAT oil-free air system offerings in Mexican industrial accounts.
- Ingersoll Rand: Global industrial conglomerate offering compressors, blowers, and fluid management products. Competes directly with Solvik's screw compressor and compressed air treatment portfolio in Mexican industrial accounts.
- Quincy Compressor: North American compressor manufacturer with established Mexican presence, offering reciprocating and rotary screw compressors plus air treatment. Directly competes with Solvik's KAIRGEN/BOGE compressor lines and downstream filtration.
- Gardner Denver (Ingersoll Rand): Industrial compressor and blower manufacturer serving Mexican industrial customers. Overlaps with Solvik's compressor, dryer, and filter product portfolio across general industrial and process industries.
- SPX FLOW: Industrial flow and filtration equipment provider with compressed air treatment products. Competes with Solvik's filtration, drying, and condensate management offerings in process and industrial applications.
Direct peers
- Donaldson Company: Global filtration manufacturer with strong industrial compressed air and process filtration portfolio. Directly competes with Solvik's Ultrafilter PREMIUM+ nanofiber filters and process filtration lines in pharmaceutical and food applications.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat4 records
Key risks6 records
Key highlights7 records
Customer concentration
SOLVIK INTERNACIONAL social profiles
Digital presenceSOLVIK INTERNACIONAL compliance and trust
Trust signalCompliance4 records
SOLVIK INTERNACIONAL financial estimates
Financial estimateRevenue estimate
Valuation estimate
SOLVIK INTERNACIONAL leadership team
Management profileNumber of profiles
SOLVIK INTERNACIONAL funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
SOLVIK INTERNACIONAL M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about SOLVIK INTERNACIONAL
What does SOLVIK INTERNACIONAL do?
Solvik Internacional sells compressed air treatment equipment (compressors, filters, dryers, condensate management systems, instrumentation) and provides maintenance, air quality measurement, and training services. The company acts as exclusive Mexican distributor for multiple German brands (Ultrafilter, BEKO, MANN, KELTEC, CS-Instruments, 2G Energy, Dürr, BOGE) and has manufactured its own Ultrafilter-brand dryers and filters in Germany since 2016. It also distributes renewable energy systems including cogeneration plants and industrial heat pumps.
Is SOLVIK INTERNACIONAL a public or private company?
SOLVIK INTERNACIONAL is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was SOLVIK INTERNACIONAL founded?
SOLVIK INTERNACIONAL was founded in 1978. It employs 11 to 50 people.
Where is SOLVIK INTERNACIONAL based?
SOLVIK INTERNACIONAL is headquartered in Tlalnepantla de Baz, Mexico, in the Latin America region.
How does SOLVIK INTERNACIONAL make money?
Four revenue lines are on record. Compressed Air Treatment Equipment Sales are the primary driver. The others are maintenance and Technical Services, spare Parts and Replacement Elements and training and Certification Services.
Who are SOLVIK INTERNACIONAL's main competitors?
Broad incumbents on record are Kaeser Compressors, Parker Hannifin, Atlas Copco, Sullair, CompAir, Ingersoll Rand, Quincy Compressor, Gardner Denver (Ingersoll Rand) and SPX FLOW. Donaldson Company is listed as a direct peer.
Does SOLVIK INTERNACIONAL have an API?
No public API is recorded for SOLVIK INTERNACIONAL.
What industry is SOLVIK INTERNACIONAL in?
SOLVIK INTERNACIONAL's product category is Compressed Air Treatment Equipment. Its primary akta.pro industry code is IMAHAGAD, Pneumatic Air Preparation & Distribution (FRL assemblies, manifolds, air headers), with a secondary code of IMADANAG, Compressors, Refrigeration Components & Condensing Units. Its NAICS code is 333415 and its SIC code is 3585.