American Pavement Systems, Inc.
American Pavement Systems is a privately held California pavement preservation contractor that field-blends and applies Asphalt-Rubber binders, chip seals, slurry seals, and micro surfacing for cities, counties, Caltrans, and commercial and residential customers across Northern and Southern California.
- Company typePrivate
- Founded2010
- HeadquartersModesto, United States
- Headcount11–50
- GTM typeB2B
- OfferingServices
What American Pavement Systems, Inc. does
American Pavement Systems, Inc. (APS) is a privately held California-based pavement preservation contractor specializing in the manufacturing, transportation, and field application of Asphalt-Rubber binders, chip seals, slurry seals, and micro surfacing treatments. The company is vertically integrated through its sister company, American Tire Recycling LLC, which processes approximately 4,000,000 California-derived tires annually to supply crumb rubber for APS's binder production — a key input for its field-blended Asphalt-Rubber formulation. APS's core technology involves on-site blending of Performance Graded asphalt (PG 64-10, PG 64-16, PG 70-10) with car tire rubber and high natural rubber in high-shear blenders at 425°F for 45 minutes, yielding a binder at 1,500-2,500 centipoise viscosity, then spray-applied at 0.55–0.65 gallons per square yard with 3/8" aggregate. This process supports a portfolio that includes Asphalt-Rubber Chip & Cape Seals, Polymer Modified Asphalt-Rubber (PMAR), Stress Absorbing Membrane Interlayers (SAMI), Asphalt-Rubber Aggregate Membrane Interlayers (ARAMI), Conventional and Polymer Modified Emulsion Chip Seals, Slurry Seals (Type I/II/III), Micro Surfacing, and Fog Seals, with reported service life of 12–15 years versus 6–8 years for conventional emulsion seals.
APS generates revenue primarily through project-based construction service contracts for pavement preservation, supplemented by supply of field-blended Asphalt-Rubber binder (RHMA) to hot mix plants serving other contractors. The go-to-market is sales-led, targeting California government agencies (cities, counties, Caltrans) through competitive bidding, complemented by direct outreach to small commercial and residential customers. The company operates from a Modesto headquarters with additional service locations in Martinez and Watsonville, covering Northern and Southern California markets, and is a member of the Western Regional Association for Pavement Preservation (WRAPP).
Customer segments are diversified across government (primary), small commercial, and residential. Pricing is not publicly disclosed, but positioning is premium relative to conventional emulsion seals (~$1.00–$1.25/sq yd higher) while delivering 3–4x cost savings versus 2" AC overlays, with contracts structured on a multi-year basis.
American Pavement Systems, Inc. firmographics
Firmographics- Name
- American Pavement Systems, Inc.
- Legal name
- American Pavement Systems, Inc.
- Website
- https://americanpavementsystems.com
- Company type
- Private
- Founded year
- 2010
- Operating status
- Operating
- Headcount range
- 11–50 employees
- Short description
- American Pavement Systems is a privately held California pavement preservation contractor that field-blends and applies Asphalt-Rubber binders, chip seals, slurry seals, and micro surfacing for cities, counties, Caltrans, and commercial and residential customers across Northern and Southern California.
- Ownership category
- akta.pro rank
American Pavement Systems, Inc. industry classification
Industry- Product category
- Pavement Preservation Services
- NAICS
- Asphalt Paving Mixture and Block Manufacturing (324121)
- SIC
- Asphalt Paving & Roofing Materials (2950)
- akta.pro primary industry
- Asphalt Mixing & Paving Materials (Hot/Warm/Cold Mix, RAP/RAS Blends) (EUALAKAG)
- akta.pro secondary industries
- Crumb Rubber & Rubberized Asphalt Products (EUALAKAJ), Polymer-Modified Asphalt (PMB) & Modified Binders (SBS/Crumb Rubber/Plastomers) (EUALAKAD)
Keywords
Where American Pavement Systems, Inc. is headquartered
LocationHeadquarters
- HQ city
- Modesto
- HQ country
- United States
- HQ region
- North America
Offices3 records
Markets served
American Pavement Systems, Inc. business model
Business model- GTM type
- B2B
- Offering type
- Services
- Cost components
- Personnel, Operations, Supply Chain, Infrastructure, Technology or R&D, Marketing or Sales
Revenue model
- Pavement Preservation Construction Services: Project-based revenue from manufacturing, transportation, and application of asphalt-rubber binders, chip seals, slurry seals, and micro surfacing for government and private customers.
- Asphalt-Rubber Binder Supply: Supply of asphalt-rubber binder to hot mix plants (RHMA) for other contractors.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Unit Pricing | Multi-year contract | Asphalt-Rubber Chip & Cape Seal - premium pavement preservation treatment |
Go-to-market motion1 record
Distribution channels1 record
Marketing channels2 records
American Pavement Systems, Inc. product offering
Product offeringCore offering
American Pavement Systems (APS) manufactures, transports, and applies Asphalt-Rubber binders, chip seals, slurry seals, micro surfacing, fog seals, and stress-absorbing membrane interlayers for pavement preservation projects. The company owns specialized binder blending, aggregate spreading, rolling, and sweeping equipment, and performs full end-to-end pavement surface treatment delivery in California for cities, counties, state agencies, small businesses, and private property owners. APS also supplies asphalt-rubber binder to hot mix plants (RHMA) for rubberized hot mix asphalt production by other contractors.
Product overview
American Pavement Systems, Inc. is a pavement preservation company offering a comprehensive portfolio of road surface treatment products and services. The company specializes in manufacturing, transportation, and application of Asphalt-Rubber Binders (field-blended using PG graded asphalt with car tire rubber), along with various chip seal, slurry seal, and micro surfacing treatments. The core product family includes Asphalt-Rubber Chip & Cape Seals and their Polymer Modified variants (PMAR), which use a proprietary field-blending process to achieve 12-15 year lifespans on roads with 3/8" to 1/2" alligator cracks. Supporting services include Conventional Emulsion Chip & Cape Seals, Slurry Seals (Type I, II, III), Micro Surfacing, Fog Seals, and Asphalt-Rubber Blending Services. The company operates through specialized divisions (AR Blending, Chip Seal, Slurry Seal) and sources crumb rubber from sister company American Tire Recycling LLC.
Differentiator
Problem solved
Functional benefit
Products and services
- Asphalt-Rubber Chip & Cape Seals Pavement surface treatment using field-blended Asphalt-Rubber binder spray applied at 0.55 to 0.65 gallons per square yard with 3/8" homogenously sized aggregate at 28-32 lbs per square yard, embedded via pneumatic rubber-tired rollers. Asphalt-Rubber Chip Seals use fog seal finish; Cape Seals use Type II Slurry Seal topping. Delivers 12-15 year lifespan on roads with 3/8" to 1/2" alligator cracking. Referenced as Asphalt-Rubber Aggregate Membranes (ARAM) in the Southern California Greenbook. Targets government agencies, commercial properties, and residential customers.
- Polymer Modified Asphalt-Rubber Chip & Cape Seals (PMAR) Enhanced Asphalt-Rubber Chip & Cape Seals with polymer modification for improved performance characteristics. Serves government and commercial pavement preservation needs.
- Stress Absorbing Membrane Interlayers (SAMI) Interlayer membrane treatment that absorbs stress between existing pavement and new surface layer, mitigating reflective cracking for government and commercial road projects.
- Asphalt-Rubber Aggregate Membrane Interlayers (ARAMI) Asphalt-Rubber based interlayer treatment for pavement preservation. Targets agencies and contractors requiring stress-absorbing interlayer systems.
- Asphalt-Rubber Binder Supply For Hot Mix Plants (RHMA) Supply of field-blended Asphalt-Rubber binder to hot mix plants for rubberized hot mix asphalt (RHMA) production. Sold to other contractors and agencies requiring binder material.
- Conventional Emulsion Chip & Cape Seals Standard emulsion-based chip seal using polymer modified asphalt emulsion sprayed and covered with aggregate. Best suited for 1/8" to 1/4" alligator cracks with 6-8 year lifespan. Targets government and commercial pavement maintenance customers.
- Polymer Modified Emulsion Chip & Cape Seals (PME) Enhanced conventional chip seal with polymer modification of the asphalt emulsion to improve durability for pavement preservation applications.
- Polymer Modified Rejuvenating Emulsion Chip & Cape Seals (PMRE) Chip seal treatment using polymer modified rejuvenating emulsion to restore aged asphalt pavement. Targets pavement preservation needs of agencies and commercial customers.
- Polymer Modified Rejuvenating Emulsion Chip & Cape Scrub Seals Enhanced scrub seal application using polymer modified rejuvenating emulsion for improved aggregate retention and pavement preservation.
- Slurry Seals (Type I, Type II, and Type III) Cost-effective pavement preservation treatment applied at one stone's width thick using mixture of water, asphalt emulsion, aggregate, and chemical additives. Type I uses finest aggregate for low-traffic roads, Type II medium for moderate traffic, Type III coarsest for high-traffic roads. Targets government and commercial roadway preservation.
- Micro Surfacing (Type II and Type III) Pavement treatment using water, asphalt emulsion, aggregate, and chemical additives. Can be applied up to 1/2" thick without rut box or up to 1" with rut box. Hardens faster than slurry seal using chemical additives rather than sun evaporation, allowing use in shaded areas and quick return to traffic. Targets government and commercial pavement preservation.
- Bituminous Spreading Services General bituminous material spreading services for pavement maintenance applications, supporting agency, commercial, and residential pavement preservation needs.
- Fog Seals Light application of emulsified asphalt sprayed onto chip seal or existing asphalt surface to renew weathered surfaces, improve appearance, and inhibit raveling. Sanding after application reduces tackiness for quicker opening to traffic. Targets agencies, commercial properties, and residential pavement maintenance.
Quantifiable outcome
- 12-15 year service life vs 6-8 years for conventional emulsion chip seals
- +2 more outcomes
Companies that use American Pavement Systems, Inc.
Customer profileNamed customers5 records
Segments3 records
Ideal customer profiles3 records
American Pavement Systems, Inc. technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature3 records
American Pavement Systems, Inc. partnerships and signals
Strategic signalPartnerships
One partnership is on record.
- American Tire Recycling LLCcoreSister company to American Pavement Systems and one of the largest waste tire recyclers in Northern California. Recycles approximately 4,000,000 California-derived tires annually, processing car, truck, and large off-road tires. Integral part of APS as they supply all crumb rubber needs for construction operations. Essential for providing superior quality crumb rubber for asphalt-rubber binder production.
Scale indicators2 records
Recent moves6 records
Expansion highlights4 records
American Pavement Systems, Inc. competitors and assessment
Company assessmentDirect peers
- Western Emulsions: California-based manufacturer of asphalt emulsions and asphalt-rubber binders serving pavement preservation contractors. Directly comparable to APS's binder manufacturing and supply operations within the same California geography.
- Vance Brothers: Established pavement preservation contractor specializing in chip seals, slurry seals, micro surfacing, and asphalt emulsions across multiple US states. Directly comparable service portfolio to APS's preservation treatment offerings.
- Intermountain Slurry Seal: Slurry seal and micro surfacing contractor serving western US public agencies. Direct comparable in slurry/micro surfacing application and government agency customer base.
- VSS Emultech: California-based pavement preservation contractor applying chip seals, slurry seals, and micro surfacing for municipal and county agencies. Direct comparable in service offerings and California public-sector customer base.
- Pavement Restoration Inc. Pavement preservation contractor offering crack sealing, chip seals, slurry seals, and micro surfacing to public agencies and private clients. Comparable service portfolio and GTM approach to APS.
- Holbrook Asphalt: Asphalt emulsion manufacturer and pavement preservation contractor with field-blending capabilities. Direct comparable in asphalt-rubber binder production and chip seal application services.
Broad incumbents
- Asphalt Materials, Inc. National asphalt binder and emulsion manufacturer serving road construction and preservation markets. Broader incumbent comparable to APS's binder supply operations but with significantly wider product line and geographic reach.
- Ergon Asphalt & Emulsions: Large-scale manufacturer of asphalt emulsions, cutbacks, and asphalt-rubber binders with broad product portfolio and national distribution. Broader incumbent serving similar end customers via wholesale channels.
- CalPortland Company: Major western US producer of ready-mix concrete, asphalt, and construction materials with California operations. Broader incumbent with overlapping customer base but much wider product portfolio than APS.
Others
- International Slurry Surfacing Association (ISSA): Industry association for slurry seal and micro surfacing contractors, of which APS-type preservation contractors are members. Comparable as ecosystem participant rather than direct competitor.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat4 records
Key risks6 records
Key highlights7 records
Customer concentration
American Pavement Systems, Inc. social profiles
Digital presenceAmerican Pavement Systems, Inc. financial estimates
Financial estimateRevenue estimate
Valuation estimate
American Pavement Systems, Inc. leadership team
Management profileNumber of profiles
American Pavement Systems, Inc. funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
American Pavement Systems, Inc. M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about American Pavement Systems, Inc.
What does American Pavement Systems, Inc. do?
American Pavement Systems (APS) manufactures, transports, and applies Asphalt-Rubber binders, chip seals, slurry seals, micro surfacing, fog seals, and stress-absorbing membrane interlayers for pavement preservation projects. The company owns specialized binder blending, aggregate spreading, rolling, and sweeping equipment, and performs full end-to-end pavement surface treatment delivery in California for cities, counties, state agencies, small businesses, and private property owners. APS also supplies asphalt-rubber binder to hot mix plants (RHMA) for rubberized hot mix asphalt production by other contractors.
Is American Pavement Systems, Inc. a public or private company?
American Pavement Systems, Inc. is a private company. It is classified as unknown and is currently operating.
When was American Pavement Systems, Inc. founded?
American Pavement Systems, Inc. was founded in 2010. It employs 11 to 50 people.
Where is American Pavement Systems, Inc. based?
American Pavement Systems, Inc. is headquartered in Modesto, United States, in the North America region.
How does American Pavement Systems, Inc. make money?
Two revenue lines are on record. Pavement Preservation Construction Services are the primary driver. The others are asphalt-Rubber Binder Supply.
Who are American Pavement Systems, Inc.'s main competitors?
Direct peers on record are Western Emulsions, Vance Brothers, Intermountain Slurry Seal, VSS Emultech, Pavement Restoration Inc. and Holbrook Asphalt. Broad incumbents are Asphalt Materials, Inc., Ergon Asphalt & Emulsions and CalPortland Company. International Slurry Surfacing Association (ISSA) is listed as an others.
Does American Pavement Systems, Inc. have an API?
No public API is recorded for American Pavement Systems, Inc..
What industry is American Pavement Systems, Inc. in?
American Pavement Systems, Inc.'s product category is Pavement Preservation Services. Its primary akta.pro industry code is EUALAKAG, Asphalt Mixing & Paving Materials (Hot/Warm/Cold Mix, RAP/RAS Blends), with a secondary code of EUALAKAJ, Crumb Rubber & Rubberized Asphalt Products. Its NAICS code is 324121 and its SIC code is 2950.