Marina Electrical Equipment
Marina Electrical Equipment is a Williamsburg, Virginia-based US manufacturer of weatherproof electrical infrastructure for marinas and waterfront facilities, including power pedestals, ground fault safety systems, unit substations, and wireless boat lift controls for commercial marina operators, military/government buyers, and waterfront developers.
- Company typePrivate
- Founded-
- HeadquartersWilliamsburg, United States
- Headcount—
- GTM typeB2B
- OfferingHardware or Manufacturing
What Marina Electrical Equipment does
Marina Electrical Equipment (MEE) is a Williamsburg, Virginia-based designer, engineer, and manufacturer of weatherproof electrical infrastructure purpose-built for marinas and waterfront facilities. The company produces power pedestals, ground fault safety and protection systems, unit substations, distribution gear, solid-state electric metering, and wireless boat lift controls, with 100% domestic US manufacturing. Its product stack spans both shore-side power distribution and consumer-side lift/automation, allowing it to serve as a single-vendor supplier for marina electrification projects.
MEE's customer base is segmented across four non-overlapping verticals: commercial and residential marina operators, military and government buyers (supported by Buy American Act compliance and a DoD Cage Code, 9SFJ4), commercial waterfront developers, and boat lift operators. The company holds a broad set of third-party certifications — UL 508A, UL 2017, UL 489, UL 1053, ETL listing to UL-1062 and CAN/CSA C22.2 No.31-10, and CSA — and is compliant with NEC Article 555, NFPA 303, and NFPA 70. Three patent-pending designs cover the GTX Unit Substation enclosure, the VGFCU-ISO vessel ground fault check unit, and the RS RetroSafe ground fault protective assembly.
MEE sells standardized hardware directly through its e-commerce channel at unit prices ranging from roughly $20 for individual breakers up to $2,900 for higher-capacity components, with boat lift controls priced in the $710-$1,135 range. Custom equipment and unit substations are quote-based, and the company charges $125 per hour for electrical design revisions beyond initial scope, providing an engineering-services revenue stream alongside equipment sales. Geographic reach is currently the United States and Caribbean, with an active push into naval and maritime government procurement.
Marina Electrical Equipment firmographics
Firmographics- Name
- Marina Electrical Equipment
- Legal name
- Marina Electrical Equipment, Inc.
- Website
- https://marinaelectricalequipment.com
- Company type
- Private
- Operating status
- Operating
- Short description
- Marina Electrical Equipment is a Williamsburg, Virginia-based US manufacturer of weatherproof electrical infrastructure for marinas and waterfront facilities, including power pedestals, ground fault safety systems, unit substations, and wireless boat lift controls for commercial marina operators, military/government buyers, and waterfront developers.
- Ownership category
- akta.pro rank
Marina Electrical Equipment industry classification
Industry- Product category
- Marine Electrical Equipment
- NAICS
- Electrical Equipment Manufacturing (3353), Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals (334515)
- SIC
- Electrical Industrial Apparatus (3620), Electronic & Other Electrical Equipment (No Computer Equip) (3600), Instruments For Meas & Testing Of Electricity & Elec Signals (3825)
- akta.pro primary industry
- Integrated Marine Electrical Systems & Switchboards (IMAJAJAA)
- akta.pro secondary industries
- Shore Power & Electrification Systems (Cold Ironing, Charging Interfaces) (IMAJAJAM), Electrical Engineering & Power Distribution (Generation, Switchboards, Cabling, Lighting) (IMAJAGAF), Life-Saving Appliances & Safety Equipment (Davit Systems, Lifeboats, Firefighting) (IMAJAIAG)
Keywords
Where Marina Electrical Equipment is headquartered
LocationHeadquarters
- HQ city
- Williamsburg
- HQ country
- United States
- HQ region
- North America
Offices1 record
Markets served
Marina Electrical Equipment business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Supply Chain, Personnel, Operations, Technology or R&D, Marketing or Sales, Infrastructure
Revenue model
- Equipment Sales: Direct sales of marine-grade electrical equipment including power pedestals, safety equipment, substations, distribution gear, and boat lift controls. One-time hardware purchases with optional professional installation services.
- Design Services: Complementary electrical layout and design consulting with one complimentary revision included. Additional revisions charged at $125/hour.
- Parts and Accessories: Replacement parts, circuit breakers, meters, receptacles, and weatherproof flip covers sold through online store.
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Unit Pricing | Pay-as-you-go | Circuit Breakers - Individual units from major manufacturers (GE, Square D, ABB, Eaton, Noark) |
| Unit Pricing | Pay-as-you-go | LiftPower Boat Lift Controls - LP30 and LP40 models |
| Other | Multi-year contract | Custom Equipment - Power pedestals, substations, distribution gear |
| Unit Pricing | Pay-as-you-go | General Merchandise - Life rings, housings, accessories |
Go-to-market motion1 record
Distribution channels3 records
Marketing channels3 records
Marina Electrical Equipment product offering
Product offeringCore offering
Marina Electrical Equipment designs, engineers, and manufactures weatherproof marine-grade electrical equipment including power pedestals, ground fault protection systems, unit substations, distribution gear, wireless boat lift controllers, and solid-state electric metering for marina operators, commercial boatyards, and military/government maritime facilities. All products are made in the USA and certified to UL, ETL, CSA, NFPA 303, and NEC Article 555 standards. The company also offers complementary electrical layout and design consulting with equipment purchases.
Product overview
Marina Electrical Equipment manufactures a comprehensive portfolio of weatherproof electrical equipment for the marina industry. The core offering consists of marine-grade power pedestals (Harbor Light SS, Harbor Light, Commodore SS, Marina Mate SS, Bayside, and Anchorage SS models) providing shore power connections with various amperage configurations. Safety equipment includes fire stations, hose racks, and ground fault monitoring systems (Sentinel, RS RetroSafe, Vessel Ground Fault Check Unit) for NEC 555 and NFPA 303 compliance. Supporting infrastructure includes GTX Unit Substations with integrated transformers, distribution gear (panelboards, switchgear), LiftPower wireless boat lift controllers, solid state metering, and electrical design services. The product line serves both commercial and military maritime applications, with components manufactured in the USA and ETL/UL listed for marine environments.
Differentiator
Problem solved
Functional benefit
Products and services
- Power Pedestals Marine-grade weatherproof power pedestals providing shore power connections for boats. Available in stainless steel and polycarbonate variants with various receptacle configurations (20A-100A, 125V-250V), GFCI protection, metered usage, and LED lighting options. Sold to marina operators and waterfront property owners.
- Safety Equipment Code-compliant marina safety infrastructure including fire extinguisher pedestals, fire hose racks, ground fault monitoring panels, and vessel fault diagnostic units designed to prevent Electric Shock Drowning (ESD) and meet NEC Article 555 and NFPA 303 standards.
- GTX Unit Substation Integrated dry-type isolation transformer and factory-installed secondary panelboard in a NEMA 3RX stainless steel enclosure designed to withstand harsh marina environments. Available in single-phase configurations up to 330kVA and three-phase up to 300kVA.
- Distribution Gear Marine-grade electrical power distribution infrastructure including custom panelboards, isolation transformers, switchgear, and safety switches rated for 100-1200 Amps with copper or aluminum bus bars, featuring Ground Fault Monitors, SPD, and corrosion-resistant NEMA 3R/4X enclosures.
- LiftPower Wireless Boat Lift Control Systems UL 508A certified wireless boat lift control systems with handheld transmitters. LP30 supports 30A contactors for single/dual motor setups; LP40 supports 40A contactors for up to four motors, with 250-500 foot range and NEMA 3RX enclosures.
- Solid State Electric Metering Advanced electronic kWh tracking devices including Sentinel KH Series monitors (120V single element, 120/208V and 480V three element variants) with CTs and counters for individual slip metering and energy management.
- Naval & Maritime Power Solutions MIL-SPEC compliant shore power systems for military defense and commercial shipyards, including naval ship-to-shore power assemblies, temporary power distribution, custom switchgear, and custom ship-to-shore cable assemblies compliant with Buy American Act (BAA) standards.
- Electrical Design Services Complimentary electrical layout and design consulting including circuit layout drawings, load calculations, cable voltage drop schedules, conduit schedules, panelboard schedules, and disconnect schedules for marina electrical infrastructure projects.
- Online Store (Parts and Accessories) E-commerce platform selling electrical parts including circuit breakers (ABB, Eaton, GE, Square D, Noark), pin and sleeve connectors, GFCI duplex receptacles, NEMA twist-lock receptacles, weatherproof flip covers, and replacement components for MEE pedestals.
Quantifiable outcome
- Compliant with NFPA 303 fire safety requirements for marina fire extinguisher placement
- +2 more outcomes
Companies that use Marina Electrical Equipment
Customer profileSegments4 records
Ideal customer profiles4 records
Marina Electrical Equipment technology and API
TechnologyTechnology focussed No
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature5 records
Marina Electrical Equipment partnerships and signals
Strategic signalScale indicators4 records
Recent moves6 records
Expansion highlights5 records
Marina Electrical Equipment competitors and assessment
Company assessmentDirect peers
- Hubbell: Hubbell is a direct peer because its marine electrical portfolio includes shore-power devices, connectors, receptacles, and related marina infrastructure for operators and original-equipment manufacturers. It overlaps MEE's power-pedestal, metering, and safety-focused electrical offering.
- Cavotec: Cavotec specializes in shore-power connection and electrification systems for ports and vessels, directly overlapping MEE's marine power and ship-to-shore infrastructure. Its port-focused customers and engineered systems make it a strong technology and business-model comparator.
- Blue Sea Systems: Blue Sea Systems designs marine electrical panels, circuit protection, meters, and power-management products for boats and marine operators. That product set closely matches MEE's distribution gear, metering, and safety components.
- Marinco: Marinco manufactures shore-power cords, connectors, adapters, and marine electrical accessories. It is a direct peer at the connection and power-delivery layer of MEE's marina offering.
- BEP Marine: BEP Marine manufactures marine electrical distribution, circuit protection, battery-management, and metering products for boatbuilders and operators. Its customer set and component-level products are directly comparable to MEE's panels, meters, and safety gear.
- Furrion: Furrion offers marine shore-power connections, power management, and electrical accessories for recreational and commercial vessels. It overlaps MEE's waterfront power offering, although its emphasis skews toward vessel and mobile-power segments.
Broad incumbents
- Eaton: Eaton is a broad incumbent in electrical distribution, switchgear, transformers, and power management, overlapping MEE's engineered distribution and waterfront infrastructure. Its scale and wider portfolio make it a useful comparator for MEE's power systems and government-facing capabilities.
- Leviton: Leviton is a broad incumbent in electrical wiring, ground-fault protection, and power devices, with marine and harsh-environment applications that overlap MEE's safety-critical electrical portfolio. It serves similar code- and reliability-driven buyers.
- ABB: ABB supplies marine and port electrical distribution, switchboards, automation, and shore-connection systems to shipyards and operators. It is a broad incumbent comparator for MEE's integrated systems and naval work.
Regional players
- Rolec Services: Rolec Services is a regional peer focused on marina electrical hook-ups, utility pedestals, and waterfront services. Its marina-centric project model and end users make it comparable to MEE, particularly in European markets.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat4 records
Key risks5 records
Key highlights7 records
Customer concentration
Marina Electrical Equipment social profiles
Digital presenceMarina Electrical Equipment compliance and trust
Trust signalCompliance8 records
Marina Electrical Equipment financial estimates
Financial estimateRevenue estimate
Valuation estimate
Marina Electrical Equipment leadership team
Management profileNumber of profiles
Marina Electrical Equipment funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Marina Electrical Equipment M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Marina Electrical Equipment
What does Marina Electrical Equipment do?
Marina Electrical Equipment designs, engineers, and manufactures weatherproof marine-grade electrical equipment including power pedestals, ground fault protection systems, unit substations, distribution gear, wireless boat lift controllers, and solid-state electric metering for marina operators, commercial boatyards, and military/government maritime facilities. All products are made in the USA and certified to UL, ETL, CSA, NFPA 303, and NEC Article 555 standards. The company also offers complementary electrical layout and design consulting with equipment purchases.
Is Marina Electrical Equipment a public or private company?
Marina Electrical Equipment is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was Marina Electrical Equipment founded?
Marina Electrical Equipment was founded in -1.
Where is Marina Electrical Equipment based?
Marina Electrical Equipment is headquartered in Williamsburg, United States, in the North America region.
How does Marina Electrical Equipment make money?
Three revenue lines are on record. Equipment Sales are the primary driver. The others are design Services and parts and Accessories.
Who are Marina Electrical Equipment's main competitors?
Direct peers on record are Hubbell, Cavotec, Blue Sea Systems, Marinco, BEP Marine and Furrion. Broad incumbents are Eaton, Leviton and ABB. Rolec Services is listed as a regional player.
Does Marina Electrical Equipment have an API?
No public API is recorded for Marina Electrical Equipment.
What industry is Marina Electrical Equipment in?
Marina Electrical Equipment's product category is Marine Electrical Equipment. Its primary akta.pro industry code is IMAJAJAA, Integrated Marine Electrical Systems & Switchboards, with a secondary code of IMAJAJAM, Shore Power & Electrification Systems (Cold Ironing, Charging Interfaces). Its NAICS code is 3353 and its SIC code is 3620.