MI-Partners
MI-Partners BV is a Veldhoven-based mechatronic engineering firm that designs and builds custom high-precision and high-acceleration systems, including sub-nanometer manipulators, vibration isolation, and magnetic levitation stages, primarily for semiconductor, medical imaging, and research customers.
- Company typePrivate
- Founded2007
- HeadquartersVeldhoven, Netherlands
- Headcount11–50
- GTM typeB2B
- OfferingServices
What MI-Partners does
MI-Partners BV is a privately held Dutch mechatronic engineering firm headquartered in Veldhoven, Netherlands, founded in 2007 by Leo Sanders. The company delivers custom mechatronic products and systems for customers that require extreme precision or speed, focusing on applications such as high-acceleration (>10g) positioning stages, sub-nanometer manipulators, vibration isolation, magnetic levitation, vacuum and cryogenic instrumentation, and precision metrology. The company operates from a single headquarters site that includes in-house assembly, thermal enclosure, and cleanroom facilities.
MI-Partners runs a project-based, sales-led consulting and engineering services model organized around service stages from feasibility and concept generation through detailed system design, realization, testing/qualification, and worldwide on-site installation, with CE/UL/EMC/FCC certification. Its technical competences span system architecture, design for precision, dynamics and control, thermal analysis, active and passive vibration isolation, simulation and FEM, actuator development, motion and equipment control, real-time and embedded software, electronics, vacuum technology, air bearing stages, and cryogenics. The product portfolio includes a mix of bespoke one-off systems (e.g., G-force test gantry for Philips, MPI head scanner, synchrotron monochromators, nano-precision wafer alignment stages with Bosch Rexroth) and standardized proprietary modules in volume production, most notably a high-damping polymer damper produced in volume with GMT for semiconductor lithography.
The company serves enterprise customers in semiconductor equipment (ASML, NXP ITEC), medical imaging (Philips Healthcare Dunlee, Philips Medical Systems), industrial automation (Bosch Rexroth), and research/scientific infrastructure (LNLS Brazilian Synchrotron, TU Delft), with project work delivered across Europe, the Americas, and the Middle East. Pricing is not publicly disclosed and is custom per project. The firm monetizes primarily through one-time engineering and hardware project fees, with an emerging component-revenue stream from the polymer damper and similar embedded modules.
MI-Partners firmographics
Firmographics- Name
- MI-Partners
- Legal name
- MI-Partners BV
- Website
- https://mi-partners.nl
- Company type
- Private
- Founded year
- 2007
- Operating status
- Operating
- Headcount range
- 11–50 employees
- Short description
- MI-Partners BV is a Veldhoven-based mechatronic engineering firm that designs and builds custom high-precision and high-acceleration systems, including sub-nanometer manipulators, vibration isolation, and magnetic levitation stages, primarily for semiconductor, medical imaging, and research customers.
- Ownership category
- akta.pro rank
MI-Partners industry classification
Industry- Product category
- Precision Mechatronic Engineering Services
- NAICS
- Navigational, Measuring, Electromedical, and Control Instruments Manufacturing (33451), Analytical Laboratory Instrument Manufacturing (334516), Navigational, Measuring, Electromedical, and Control Instruments Manufacturing (3345)
- SIC
- Industrial Instruments For Measurement, Display, And Control (3823), Laboratory Analytical Instruments (3826), Services-Commercial Physical & Biological Research (8731)
- akta.pro primary industry
- Mechatronics Systems & Integration (EDAOAHAB)
- akta.pro secondary industries
- Instrumentation & Process Control (I&C) (EDAOABAF), Sensors & Instrumentation Electronics Manufacturing Services (Transmitters, analyzers, industrial sensors) (IMAGAGAL)
Keywords
Where MI-Partners is headquartered
LocationHeadquarters
- HQ city
- Veldhoven
- HQ country
- Netherlands
- HQ region
- Europe
Offices1 record
Markets served
MI-Partners business model
Business model- GTM type
- B2B
- Offering type
- Services
- Cost components
- Personnel, Technology or R&D, Infrastructure, Operations, Marketing or Sales
Revenue model
- Custom Prototype Development: Bespoke engineering services developing prototypes and one-of-a-kind equipment for customers. Projects typically involve high-complexity mechatronic systems with focus on speed and accuracy advantages.
- Volume Production (Polymer Dampers): Volume production of specialized components like polymer dampers developed in partnership with GMT, currently produced in volume for semiconductor applications.
- CE-Certified System Delivery: Delivery of CE-certified complete systems including on-site installation, factory acceptance testing, and worldwide installation of certified equipment.
Go-to-market motion1 record
Distribution channels1 record
Marketing channels5 records
MI-Partners product offering
Product offeringCore offering
MI-Partners provides project-based mechatronic engineering services covering the full development lifecycle: feasibility study, concept generation, system design, prototype realisation, testing and qualification, and worldwide on-site installation of CE-certified systems. In addition, the company develops and produces custom precision mechatronic systems and components (such as polymer dampers, active vibration isolation platforms, magnetic levitation stages, gantry stages, manipulators, and synchrotron instrumentation) for enterprise customers in semiconductor, medical imaging, and scientific research markets.
Product overview
MI-Partners is a mechatronic engineering services company providing end-to-end product development from feasibility studies through concept generation, system design, realisation, testing, and on-site installation. Their service offerings are organized around core technical competences including System Architecture, Design for Precision, Dynamics and Control, Thermal Analysis, Vibration Isolation and Damping, Testing and Validation, Simulation and FEM Analysis, Actuator Development, Motion and Equipment Control, Software Development, Electronics, Vacuum Technology, Air Bearing Stages, Cryogenics, and Project Management. Their product portfolio includes custom-built precision mechatronic systems such as the G-force Test Gantry for medical imaging, Polymer Damper for semiconductor lithography, Nano Precision X-Y-Rz Stage, Through-wall Maglev Stage for vacuum applications, Active Vibration Isolation Platform, MPI Head Scanner for medical diagnosis, various synchrotron instrumentation (Rotating Sample Manipulator, Sample Positioning Stage, DC Monochromator), and specialized industrial equipment including High-speed XYZ Glue Unit, Seismic Shaker, and Diffractive Element Tester. The company operates on a project-based model delivering prototypes and one-of-a-kind certified systems rather than a standard product platform.
Differentiator
Problem solved
Functional benefit
Products and services
- Feasibility Study Early-stage technical feasibility evaluation, typically addressing 'factor 2' questions about speed, accuracy, or cost improvements using hand calculations, numerical methods, or FEM analysis.
- Concept Generation Detailed concept design in CAD with actuator and sensor definitions, supported by predictive numerical and FEM models for mechanical, dynamical, and thermal performance.
- System Design Full component design and selection, assembly and tooling development, and definition of electronic, control, and software architectures.
- Realisation Prototype and one-off system manufacturing with in-house assembly, thermal enclosure, and cleanroom facilities.
- Testing and Qualification Measurement and validation services including modal analysis, thermal measurements, floor vibration analysis, dynamic stiffness testing, and CE certification measurements.
- On-site Installation Worldwide equipment installation including transport, factory acceptance testing, and setup of large equipment up to 20+ tons.
- G-force Test Gantry Test gantry for testing X-Ray modules used in CT Scanners, applying centrifugal forces for overload and lifetime testing. Developed for Philips Medical Systems.
- Polymer Damper High-damping polymer damper (50% damping ratio) developed with GMT for semiconductor lithography tools, produced in volume production.
- High-speed XYZ Glue Unit High-speed XYZ manipulator for printing glue lines in semiconductor die bonding, with 8x8x8 mm working area and 5µm accuracy.
- SCIL Nano-imprint Module Nano-imprint technology module for integration into SÜSS MicroTec MA6 mask aligner, using glass groove plates for imprint replication.
- Rotating Sample Manipulator High-accuracy sample manipulator for nano imaging with nanometer-level off-center accuracy during rotation for 3D sample imaging.
- Sample Positioning Stage In-vacuum cryogenic sample stage with nanometer-level positioning stability for synchrotron X-ray microscopy applications.
- DC Monochromator Scanning DC Monochromator for Brazilian Synchrotron Sirius project, with Bragg angle control from 2-60 degrees for sample analysis.
- Nano Precision X-Y-Rz Stage High-accuracy stage for wafer alignment developed with Bosch Rexroth, achieving ±2.5mm stroke, 50nm settling in 30ms, and <10nm drift.
- Through-wall Maglev Stage Vacuum-compatible 6-DOF through-wall magnetic levitation actuator using SS-LS stage configuration for contamination-free precision positioning.
- Active Vibration Isolation Platform Active 6-DOF vibration isolation platform with patented sensor interface eliminating horizontal-tilt crosstalk, achieving sub-Hertz isolation.
- Gantry Stage Demonstrator Gantry stage demonstrator with X,Y,θ motion developed with Bosch Rexroth featuring >100Hz bandwidth and <1µm repeatability.
- MPI Head Scanner Head-size Magnetic Particle Imaging scanner with movable field-free point (<1mT) achieving <0.1mm reproducibility. Developed for Philips Medical Systems.
- Glass Test Setup Test setup for strength testing of glass components in X-Ray sources (150kV), reducing mounting stress by factor of 3-4.
- Actuator Test Rig Test setup for actuator characterization with extreme force range-resolution ratio (1kN ±1mN) and 10kHz closed-loop sample frequency.
- Seismic Shaker Linear motor-based seismic vibrator for low-frequency ground excitation (2-200Hz) without hydraulic limitations. Spun off to Seismic Mechatronics.
- Hybrid Actuator Linear hybrid actuator for active force cancellation achieving 300N with 10500 N²/W actuator constant.
- Automatic Bookstack Unloader Industrial book stack unloader for HP industrial printers, unloading within 0.5 seconds without disturbing print cycle.
- Diffractive Element Tester Industrial testing machine for Diffractive Optical Elements (3D sensors), testing 14,400 elements per hour.
- Over Actuated Demonstrator Test setup for smart actuator placement on 450mm wafer chuck achieving 200Hz bandwidth at 7kg stage mass.
- Assembly Tool Precision alignment and gluing tool for high-tech applications with <100nm X/Y/Rz positioning budget.
- Trailer Design Low-cost trailer design for Hapert achieving 45% cost reduction while maintaining quality.
Quantifiable outcome
- Accelerations exceeding 10g achieved in ultra-fast positioning stages
- +7 more outcomes
Companies that use MI-Partners
Customer profileNamed customers9 records
Segments4 records
Ideal customer profiles4 records
MI-Partners technology and API
TechnologyTechnology focussed Yes
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
Feature8 records
MI-Partners partnerships and signals
Strategic signalPartnerships
Nine partnerships are on record, tiered core and minor.
- LNLS (Brazilian Synchrotron Light Laboratory)coreClose cooperation with LNLS for development of scanning DC Monochromator for the Sirius project in Brazil. LNLS beamline engineers participated in assembly and tuning as part of knowledge transfer process.
- GMT Gummi-Metall Technik GmbHcoreClose cooperation with GMT for development of polymer damper technology with extremely high damping ratio (50%). GMT produces dampers in volume for semiconductor applications.
- Bosch RexrothcoreCooperation with Bosch Rexroth on nano precision stage for wafer alignment and gantry stage demonstrator. Bosch Rexroth provides E-components and implements motion control on NYCE 4000 platform.
- Magnetic InnovationscorePartnership for actuator and magnetic FEM design. Magnetic Innovations provides 2D/3D finite element calculations of magnetic fields and coil/yoke manufacturing for custom actuators.
- NTS MechatronicsminorNTS provides cleanroom facilities and assembly support for projects including nano precision stage and actuator test rig.
- Seismic MechatronicsminorTU Delft spinoff company that commercialized the seismic shaker developed by MI-Partners.
- SÜSS MicroTec AGminorIntegration of SCIL nano-imprint technology into SÜSS MicroTec's MA6 Mask Aligner platform.
- VHEminorEngineering and realization of E-cabinet/hardware and PLC software for various projects including active vibration isolation and g-force test gantry.
- TU/e (Eindhoven University of Technology)minorAcademic partnership for rotating sample manipulator development. Students from TU/e have graduated on vibration isolation and active vibration isolation subjects.
Scale indicators5 records
Recent moves6 records
Expansion highlights5 records
MI-Partners competitors and assessment
Company assessmentEmerging players
- SÜSS MicroTec: SÜSS MicroTec is a semiconductor equipment vendor listed in MI-Partners' partnerships data as the integrator of MI-Partners' SCIL nano-imprint module. Comparable as a precision equipment customer/peer in semiconductor process tooling.
- Seismic Mechatronics: Seismic Mechatronics is a TU Delft spinoff that commercialized the seismic shaker developed by MI-Partners. Comparable as a high-tech mechatronics venture spun out of the same Dutch precision engineering ecosystem.
Broad incumbents
- VDL Enabling Technologies Group: VDL ETG is a large Dutch industrial group providing mechatronic systems, precision manufacturing, and supply chain services to semiconductor, medical, and analytical equipment OEMs. It is a broader incumbent competitor with much larger scale than MI-Partners.
- TNO (Netherlands Organisation for Applied Scientific Research): TNO is the Dutch applied research organization with significant mechatronics, optics, and precision engineering capabilities. It operates as a broader, publicly-funded incumbent that overlaps with MI-Partners' research-oriented mechatronic development work.
Direct peers
- Sioux Technologies: Sioux is a Dutch high-tech mechatronics engineering services firm headquartered in Eindhoven, very close to MI-Partners in Veldhoven. It offers overlapping capabilities in precision motion, optical systems, and multidisciplinary product development for semiconductor and medical customers.
- Physik Instrumente (PI): PI is a global leader in precision positioning systems, nanopositioning stages, and piezo actuators, serving semiconductor, photonics, and life-science markets. Directly comparable in sub-nanometer and high-acceleration positioning capability to MI-Partners' core offering.
- Aerotech: Aerotech manufactures high-precision motion control and positioning stages, including nanopositioning and vibration isolation systems. It is a direct competitor in the high-accuracy, high-bandwidth motion market that MI-Partners serves.
- NTS Group: NTS Group is a Netherlands-based mechatronics system supplier delivering precision mechanics, mechatronic modules, and assemblies, and is listed in MI-Partners' own data as a cleanroom/assembly partner. Competes for similar semiconductor and high-tech OEM engineering services work.
Regional players
- Neways Electronics International: Neways is a Dutch electronics and mechatronics manufacturing services provider serving semiconductor, medical, and industrial customers. Comparable as a regional EMS/mechatronics peer competing for similar Dutch OEM engineering and production work.
Others
- Continental Engineering Services: Continental Engineering Services provides mechatronic and systems engineering services to automotive and industrial OEMs. Adjacent peer offering project-based multidisciplinary engineering services comparable in model to MI-Partners.
Market position
Weaknesses5 records
Competitive moat5 records
Key risks5 records
Key highlights7 records
Customer concentration
MI-Partners social profiles
Digital presenceMI-Partners financial estimates
Financial estimateRevenue estimate
Valuation estimate
MI-Partners leadership team
Management profileNumber of profiles
Profiles1 record
MI-Partners funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
MI-Partners M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about MI-Partners
What does MI-Partners do?
MI-Partners provides project-based mechatronic engineering services covering the full development lifecycle: feasibility study, concept generation, system design, prototype realisation, testing and qualification, and worldwide on-site installation of CE-certified systems. In addition, the company develops and produces custom precision mechatronic systems and components (such as polymer dampers, active vibration isolation platforms, magnetic levitation stages, gantry stages, manipulators, and synchrotron instrumentation) for enterprise customers in semiconductor, medical imaging, and scientific research markets.
Is MI-Partners a public or private company?
MI-Partners is a private company. It is classified as founder individual operated bootstrapped and is currently operating.
When was MI-Partners founded?
MI-Partners was founded in 2007. It employs 11 to 50 people.
Where is MI-Partners based?
MI-Partners is headquartered in Veldhoven, Netherlands, in the Europe region.
How does MI-Partners make money?
Three revenue lines are on record. Custom Prototype Development is the primary driver. The others are volume Production (Polymer Dampers) and CE-Certified System Delivery.
Who are MI-Partners's main competitors?
Emerging players on record are SÜSS MicroTec and Seismic Mechatronics. Broad incumbents are VDL Enabling Technologies Group and TNO (Netherlands Organisation for Applied Scientific Research). Direct peers are Sioux Technologies, Physik Instrumente (PI), Aerotech and NTS Group. Neways Electronics International is listed as a regional player. Continental Engineering Services is listed as an others.
Does MI-Partners have an API?
No public API is recorded for MI-Partners.
What industry is MI-Partners in?
MI-Partners's product category is Precision Mechatronic Engineering Services. Its primary akta.pro industry code is EDAOAHAB, Mechatronics Systems & Integration, with a secondary code of EDAOABAF, Instrumentation & Process Control (I&C). Its NAICS code is 33451 and its SIC code is 3823.