Texa
TEXA S.p.A. is an Italian multi-brand automotive diagnostics and garage equipment manufacturer serving independent workshops, motorcycle and marine OEMs, and premium automotive OEMs (Volkswagen Group, Lamborghini) with the IDC6 software platform, NAVIGATOR interfaces, A/C service stations, ADAS calibration tools, and e-Powertrain components.
- Company typePrivate
- Founded1992
- HeadquartersTreviso, Italy
- Headcount501–1,000
- GTM typeB2B
- OfferingHardware or Manufacturing
What Texa does
TEXA S.p.A. is an Italian-founded (1992) multi-brand automotive diagnostics and garage equipment company headquartered in Monastier di Treviso. It operates a platform-plus-modules architecture centered on the IDC6 diagnostic software, which pairs with proprietary vehicle interfaces (NAVIGATOR Nano S 2, NAVIGATOR TXB 2, TXT Multihub 2), display tablets (AXONE VOICE, AXONE NEMO PLUS, AXONE NEMO LIGHT), and the recurring TEXPACK subscription that bundles continuous software updates and authenticated secure-gateway access for protected vehicles. Its hardware portfolio spans the KONFORT 700-series A/C service stations (200,000+ units produced since 2011), the H2 BLASTER hydrogen-engine cleaning system, the RCCS 3 ADAS calibration unit (winner of Équipement de l'Année 2022), the E-DIAG CHARGER for EV/PHEV charging and diagnostics, and an e-Powertrain division producing inverters, vehicle control units, and axial flux electric motors in ISO 8 cleanrooms under IATF 16949 and ISO 26262, deployed in Lamborghini Revuelto and Temerario vehicles.
The company generates revenue through hardware sales (the largest stream), annual TEXPACK subscriptions, IDC6 software licenses, pay-per-use CARA-approved battery SoH certificates, professional services including TEXAEDU training, and OEM supply agreements for e-Powertrain components. Go-to-market combines eight wholly-owned regional subsidiaries (Italy, Germany, France, Spain, UK, Poland, USA, Brazil/LATAM) with an authorized distributor network covering 70+ countries, direct-to-workshop e-commerce via the myTEXA portal, and strategic OEM partnerships. Customer base spans independent workshops (primary), commercial fleets, motorcycle OEMs (Ducati, Sherco, Italjet, Betamotor, Moto Morini, AJP), marine engine manufacturers (Seatek, Selva, Tohatsu, Dumarey), off-highway operators, and premium automotive OEMs (Volkswagen Group, Lamborghini, Volvo, Hyundai/Genesis, Mercedes-Benz, Nissan/Infiniti, KIA, Maserati, Renault/Dacia) for authenticated diagnostic access and EV components. Reported projected turnover exceeds EUR 200 million with 70%+ from exports; the company is privately held (single-member, under Opera Holding S.p.A.) and led by founder/President Bruno Vianello.
Texa firmographics
Firmographics- Name
- Texa
- Legal name
- TEXA S.p.A.
- Website
- https://texa.com
- Company type
- Private
- Founded year
- 1992
- Operating status
- Operating
- Headcount range
- 501–1,000 employees
- Short description
- TEXA S.p.A. is an Italian multi-brand automotive diagnostics and garage equipment manufacturer serving independent workshops, motorcycle and marine OEMs, and premium automotive OEMs (Volkswagen Group, Lamborghini) with the IDC6 software platform, NAVIGATOR interfaces, A/C service stations, ADAS calibration tools, and e-Powertrain components.
- Ownership category
- akta.pro rank
Texa industry classification
Industry- Product category
- Automotive Diagnostic Equipment
- NAICS
- Motor Vehicle Electrical and Electronic Equipment Manufacturing (33632), Commercial and Service Industry Machinery Manufacturing (333310), Ventilation, Heating, Air-Conditioning, and Commercial Refrigeration Equipment Manufacturing (33341), Electrical Equipment Manufacturing (33531)
- SIC
- Industrial Instruments For Measurement, Display, And Control (3823), Electronic & Other Electrical Equipment (No Computer Equip) (3600), Electrical Industrial Apparatus (3620)
- akta.pro primary industry
- Aftermarket Tools, Equipment & Garage Accessories Manufacturing (Jacks/Lifts/Diagnostic Tools/Compressors) (IMACANAM)
- akta.pro secondary industries
- Automotive ECUs/Control Modules & Embedded Electronics Manufacturing (IMACAJAC), Passenger Vehicle Electrical & Electronics Manufacturing (ICE) (IMACAAAK), Automotive Refrigerant Lines, Hoses & Thermal Plumbing (IMACALAG)
Keywords
Where Texa is headquartered
LocationHeadquarters
- HQ city
- Treviso
- HQ country
- Italy
- HQ region
- Europe
Offices12 records
Markets served
Texa business model
Business model- GTM type
- B2B
- Offering type
- Hardware or Manufacturing
- Cost components
- Supply Chain, Technology or R&D, Personnel, Infrastructure, Operations, Marketing or Sales
Revenue model
- Hardware Devices: Diagnostic interfaces (Navigator TXB 2, Navigator Nano S 2, TXT Multihub 2), diagnostic tablets (AXONE NEMO PLUS, AXONE LIGHT), E-DIAG CHARGER, H2 BLASTER, KONFORT A/C stations, RCCS 3 calibration units
- TEXPACK Subscriptions: Annual subscription service providing software updates, technical contents, and access to authenticated diagnostics for protected vehicles. Includes TEXPACK CAR, TEXPACK E-DIAG CHARGER, TEXPACK TRUCK, and TEXPACK BIKE packages
- Software Licenses: IDC6 software licenses for CAR, TRUCK, BIKE, MARINE, OFF-HIGHWAY environments. Non-exclusive, non-transferable licenses granted to users
- Accredited Certification Services: Pay-per-use CARA-approved third-party battery health certificates for electric and plug-in hybrid vehicles. Workshop certificates available free with subscription
- Professional Services: TEXAEDU specialized technical training courses for product usage. Call Center technical support including SERMI-authorized assistance
- e-Powertrain OEM Components: Inverters, vehicle control units, and axial flux electric motors supplied to automotive OEMs under multi-year trade secret agreements
Pricing tiers
| Model | Billing | Price |
|---|---|---|
| Transaction based/ take rate | Pay-as-you-go | CARA-Approved Third-Party Certificate for battery SoH |
| Subscription | Annual | TEXPACK Subscription Packages |
| One time/ perpetual license | Multi-year contract | IDC6 Software Licenses |
Go-to-market motion3 records
Distribution channels11 records
Marketing channels8 records
Texa product offering
Product offeringCore offering
TEXA designs, manufactures, and sells multi-brand vehicle diagnostic hardware and software (IDC6 platform), A/C system recharging stations (KONFORT), ADAS calibration systems (RCCS 3), hydrogen-oxygen engine cleaning devices (H2 BLASTER), and e-Powertrain components (inverters, vehicle control units, axial flux motors) for automotive OEMs. Products are sold to independent repair workshops through authorized distributors and regional subsidiaries, and directly to OEMs via supply agreements.
Product overview
Texa is a multi-brand diagnostic and garage equipment company offering a platform-plus-modules architecture. The core IDC6 diagnostic software platform serves as the central system, supported by proprietary vehicle interfaces (NAVIGATOR Nano S 2, NAVIGATOR TXB 2, TXT Multihub 2) and display tablets (AXONE VOICE, AXONE NEMO PLUS, AXONE NEMO LIGHT). The TEXPACK subscription provides ongoing software updates and secure gateway authentication. Key hardware products include the E-DIAG CHARGER for EV charging/diagnostics, KONFORT 700 Series A/C stations, H2 BLASTER hydrogen cleaning system, and RCCS 3 ADAS calibration unit. The e-Powertrain division produces EV components (inverters, control units, motors) for OEM partners. Additional services include SoH battery health certification, myTEXA portal, eTRUCK fleet management, and TEXAEDU training. The company serves automotive, truck, bike, marine, off-highway, and A/C system markets through global dealer networks.
Differentiator
Problem solved
Functional benefit
Brands
- IDC6: AI-supported diagnostic software system for multi-brand vehicle diagnostics
- SoH (State of Health)
- KONFORT
- NAVIGATOR
- AXONE
- E-DIAG CHARGER
- H2 BLASTER
- RCCS
- e-Powertrain
- TEXPACK
Products and services
- IDC6 Software Multi-brand vehicle diagnostic software platform supporting cars, trucks, bikes, off-highway, marine, and A/C systems with AI-supported diagnostic assistant, secure gateway authentication, and cloud-connected services. Used by independent repair shops and OEM-authorized networks worldwide.
- KONFORT 700 Series A/C Service Stations A/C service stations for vehicle air conditioning maintenance and recharging, with 12 models supporting multiple refrigerants (R134a, R444a, R456a, R1234yf, R744) with standard keypad or touchscreen displays. Used by automotive workshops and service centers.
- E-DIAG CHARGER Mobile EV charging and diagnostic device supporting DC/AC charging up to 1000V via CCS2 Combo and Type 2 connectors for BEVs and PHEVs with built-in NAVIGATOR NANO SERVICE diagnostics, battery SoH certification, MID-certified measurement, and 10-inch multi-touch display.
- H2 BLASTER Hydrogen-oxygen engine cleaning device that restores combustion engine performance by removing carbon deposits from EGR valves, combustion chambers, and piston crowns while reducing fuel consumption and harmful emissions. Used by automotive workshops servicing internal combustion engines.
- RCCS 3 ADAS Calibration System
Companies that use Texa
Customer profileNamed customers11 records
Segments6 records
Ideal customer profiles4 records
Texa technology and API
TechnologyTechnology focussed Yes
API detail
- Has API
- No
- API docs
- API detail
Core technology
AI maturity
App detail
AI capability5 records
Feature8 records
Texa partnerships and signals
Strategic signalPartnerships
22 partnerships are on record, tiered core and flagship.
- Nissan/InfiniticoreAuthenticated secure gateway diagnostics for Nissan and Infiniti vehicles. Available for Europe and Japan markets. Included in TEXPACK CAR subscription for verified myTEXA account holders.
- ItaljetcoreTEXA signed agreement with Italjet for diagnostic solutions across their dealer network. Navigator TXB 2 interface and IDC6 BIKE software adopted by Italjet's 300+ dealers worldwide. Part of TEXA's strategy to strengthen official diagnostics segment in two-wheelers.
- CARA (Car Remarketing Association)coreCARA approves third-party battery health certificates for electric and plug-in hybrid vehicles. CARA defines reference standards for automotive remarketing and promotes uniform criteria for vehicle evaluation.
- Automobili LamborghiniflagshipPartnership for e-Powertrain components. Lamborghini Revuelto and Temerario equipped with TEXA inverters and vehicle control units. Featured in Milo Manara 2026 calendar illustration. Lamborghini represents approximately 25% of vehicles registered in Europe.
- VolvocoreAuthenticated secure gateway diagnostics for Volvo vehicles equipped with ECU protection systems. Unlimited electronic diagnostics available through IDC6 CAR 2025.12 software. Access authenticated, secure, and without limitations at no additional cost.
- DNVcoreGlobal certification body providing ISO 9001 certification since 2005, IATF 16949, ISO 27001, TISAX, and ISO 14001 certifications. DNV CEO Massimo Alvaro presented commemorative plaque for 20-year certification milestone.
- Hyundai/GenesiscoreAuthenticated secure gateway diagnostics for Hyundai vehicles with ECU protection systems. Includes Genesis luxury brand and light commercial vehicles. Genesis full lineup launching in Italy in 2026. Available for European users with active TEXPACK subscription.
- SeatekcoreSeatek, leading brand in high-performance marine engines, chose TEXA as official diagnostic supplier. TEXA provides IDC6 MARINE software and NAVIGATOR TXB 2 interface. Specific diagnostic protocol developed for Seatek's 10.2-liter, 6-cylinder 900 CR engine. Seatek participated in Miami-Nassau-Miami, Venezia-Montecarlo races.
- Kiwa ItaliacoreCAB accredited certification body for SERMI (Security Related Vehicle Repair and Maintenance Information) scheme certification. Issued mandatory SERMI certificate in Italy starting February 1, 2025.
- DumareycorePartnership for diagnostics on zero-emission marine engines powered by renewable and sustainable fuels. Confirms TEXA's research focus on sustainable marine propulsion.
- Mercedes-BenzcoreAuthenticated secure gateway diagnostics for Mercedes-Benz vehicles. Access authenticated, secure, and unlimited without additional costs for repair professionals.
- MaseraticoreSecure gateway authenticated unlock available for Maserati vehicles with protected control units. Service integrated within IDC5/CAR software and included in TEXPACK subscription.
- KIAcoreProtected vehicle diagnosis unlock available for KIA vehicles with ECU protection systems. Diagnostic operations available in authenticated manner quickly and easily through IDC5 CAR 76.2.0 software.
- ShercocoreWorldwide cooperation agreement. Over 1,100 points of sale will use Navigator TXB Zero interface and customized IDC5 BIKE software with tailored vehicle coverage. Sherco present in 5 continents and 70+ countries.
- AJPcorePart of TEXA's motorcycle OEM network including Benelli Q.J., Bimota, Brough Superior, Fantic Motor, F.B. Mondial, MGK Hellenic Motor, MV Agusta, SWM, SYM Italia, Padana Sviluppo.
- Volkswagen GroupflagshipMulti-year supply agreements for e-Powertrain components (inverters, vehicle control units, axial flux electric motors) under trade secret. Volkswagen Group Award received July 2024 for Lamborghini Revuelto. Secure gateway authenticated diagnostics integration for VW, Audi, Seat, Cupra, Skoda, VW Commercial Vehicles, Bentley, Lamborghini.
- BetamotorcoreWorldwide agreement for Betamotor dealerships and authorized workshops diagnostic solutions.
- Renault/DaciacoreRenault and Dacia gateway unlock integrated within IDC5 software. Authenticated diagnostics for vehicles with protected control units.
- Moto MorinicoreMoto Morini dealerships and authorized workshops use TEXA solutions for official diagnostic activities.
- Ravaglioli S.p.A. (VSG)coreTechnical alliance with Ravaglioli, member of Vehicle Service Group (VSG). Integration of electronics competences with mechanical and alignment capabilities. Focus on alignment and ADAS technologies. Extended to all VSG EMEA companies.
- Selva MarinecoreNavigator TXB Evolution diagnostic tool chosen as official electronic diagnosis solution. Ongoing official supply relationship.
- DucatiflagshipOfficial supplier of Ducati Diagnostic System 3.0 since 2011. Over ten years of partnership supplying official diagnostic tool for Borgo Panigale motorcycle company.
Scale indicators16 records
Recent moves8 records
Expansion highlights7 records
Texa competitors and assessment
Company assessmentBroad incumbents
- Snap-on: Snap-on sells diagnostic and workshop equipment to professional technicians (MODIS, Solus) and is a broad incumbent in vehicle service tools. Comparable to TEXA through its multi-brand diagnostic handheld/tablet portfolio and franchised North American/European workshop channel.
- Bosch (Automotive Aftermarket / Diagnostics): Bosch is the dominant global aftermarket diagnostic-equipment manufacturer (KTS series) with broad OEM relationships, ESI[tronic] software and a global workshop-channel footprint. Directly comparable to TEXA in multi-brand diagnostics and ADAS calibration, and overlaps in workshop equipment.
- Continental Automotive Aftermarket: Continental's aftermarket business supplies diagnostic tools (e.g., VDO/ContiSys), ADAS calibration equipment and workshop solutions. Comparable to TEXA through multi-brand diagnostics and ADAS calibration (RCCS 3 equivalent), with a much broader portfolio.
- MAHLE (Service & Diagnostic Solutions): MAHLE's aftermarket division offers diagnostic tools (e.g., TechPro), A/C service stations and workshop equipment, putting it in direct competition with TEXA's KONFORT and AXONE/NAVIGATOR lines across automotive workshops.
Direct peers
- AVL DiTEST: AVL DiTEST specializes in multi-brand vehicle diagnostics and emissions testing equipment for workshops and inspection stations. Closely comparable to TEXA on professional diagnostic tools, with strong European distribution overlap.
- Autel Intelligent Technology: Autel (MaxiSys series) is a global multi-brand diagnostic tool specialist with strong EV/ADAS coverage and a tablet-based product line analogous to AXONE. Comparable in aftermarket diagnostics product positioning, particularly for EV battery and high-voltage system diagnostics.
- Launch Tech: Launch Tech (X-431 series) is one of the largest aftermarket multi-brand diagnostic equipment makers globally. Direct overlap with TEXA in IDC6-style software platforms, tablet interfaces and Asian/European motorcycle and passenger car diagnostic coverage.
- Actia Group: Actia designs and manufactures multi-brand diagnostic tools, telematics and embedded electronics for vehicles, including OEM-grade electronics. Similar horizontal product breadth to TEXA across diagnostics, electronics and connected-vehicle services.
- Hella Gutmann Solutions: Hella Gutmann's mega macs diagnostic platform competes head-to-head with IDC6 across European independent workshops and offers ADAS calibration (CSC-Tool). Closely aligned with TEXA on multi-brand coverage, secure-gateway authentication and A/C service equipment.
Emerging players
- Ravaglioli (Vehicle Service Group): Ravaglioli - TEXA's strategic alliance partner - is a leading workshop equipment maker (lifts, wheel alignment, ADAS calibration). Relevant as a complementary workshop-equipment partner and partial peer in ADAS calibration adjacent to TEXA's RCCS 3 business.
Market position
Strengths5 records
Weaknesses5 records
Competitive moat6 records
Key risks7 records
Key highlights7 records
Customer concentration
Texa social profiles
Digital presenceTexa compliance and trust
Trust signalCompliance10 records
Texa financial estimates
Financial estimateRevenue estimate
Valuation estimate
Texa leadership team
Management profileNumber of profiles
Profiles7 records
Texa subsidiaries and ownership
Company hierarchySubsidiaries7 records
Texa funding detail
Funding detailFunding overview
Funding rounds
Investors
Funding detail is available on the Subscription and Enterprise plan.Contact sales →
Texa M&A and investment
M&A and investmentM&A
Investments
M&A and investment is available on the Subscription and Enterprise plan.Contact sales →
Frequently asked questions about Texa
What does Texa do?
TEXA designs, manufactures, and sells multi-brand vehicle diagnostic hardware and software (IDC6 platform), A/C system recharging stations (KONFORT), ADAS calibration systems (RCCS 3), hydrogen-oxygen engine cleaning devices (H2 BLASTER), and e-Powertrain components (inverters, vehicle control units, axial flux motors) for automotive OEMs. Products are sold to independent repair workshops through authorized distributors and regional subsidiaries, and directly to OEMs via supply agreements.
Is Texa a public or private company?
Texa is a private company. It is classified as corporate owned and is currently operating.
When was Texa founded?
Texa was founded in 1992. It employs 501 to 1,000 people.
Where is Texa based?
Texa is headquartered in Treviso, Italy, in the Europe region.
How does Texa make money?
Six revenue lines are on record. Hardware Devices are the primary driver. The others are TEXPACK Subscriptions, software Licenses, accredited Certification Services, professional Services and e-Powertrain OEM Components.
Who are Texa's main competitors?
Broad incumbents on record are Snap-on, Bosch (Automotive Aftermarket / Diagnostics), Continental Automotive Aftermarket and MAHLE (Service & Diagnostic Solutions). Direct peers are AVL DiTEST, Autel Intelligent Technology, Launch Tech, Actia Group and Hella Gutmann Solutions. Ravaglioli (Vehicle Service Group) is listed as an emerging player.
Does Texa have an API?
No public API is recorded for Texa.
What industry is Texa in?
Texa's product category is Automotive Diagnostic Equipment. Its primary akta.pro industry code is IMACANAM, Aftermarket Tools, Equipment & Garage Accessories Manufacturing (Jacks/Lifts/Diagnostic Tools/Compressors), with a secondary code of IMACAJAC, Automotive ECUs/Control Modules & Embedded Electronics Manufacturing. Its NAICS code is 33632 and its SIC code is 3823.